Product Specification CL-120 IEEE802.11 a/n 3T3R PCIe Module Version: 1.
Release History DATE REV 2014/10/15 1.
CL-120 IEEE802.11a/n 3T3R PCIe Module 1. Introduction CL-120 is an integrated MAC/Baseband/Radio with the pcie Celeno CLR260 interface. single-chip CL-120 fully 5GHz complies IEEE802.11a/n with IEEE802.11n 3T3R and IEEE802.11a/n feature rich wireless connectivity at high standards, delivers reliable, cost-effective, throughput from an extended distance. 2. Features Interoperable with IEEE802.11a/n WLAN. Reverse direction grant data flow and frame aggregation.
Electrical Specification Frequency Range Modulation Data Rate 802.11b CCK Mode 802.11a OFDM Mode 802.11n HT20 Mode GI 800ns 802.11n HT20 Mode GI 400ns 802.11n HT40 Mode GI 800ns 802.11n HT40 Mode GI 400ns Output Tx power Rx Sensitivity Security 5180 - 5825 BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, and CCK xx Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 6.5 ~195 Mbps MCS 0 ~ MCS 23 7.2 ~216 Mbps MCS 0 ~ MCS 23 13.5 ~ 405Mbps MCS 0 ~ MCS 23 15 ~ 450Mbps MCS 0 ~ MCS 23 5 GHz LOW Band 16.5dbm +/-1.
. CL-120 PCIe module installation (1) Check main board quality and make sure the connector if soldered right. (2) Get the CL‐120, and plug into the connector.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
