User Manual

What’s Included
KAMAI
HYBRID TV MEDIA PLAYER
500 Series Quick Start Guide
DIN-to-RCA Cable
Kamai Hybrid TV Media Player Product
Manual
(Optional)
Remote
Control Guide
(Optional)
Quick Start
Guide
Remote Control*
2 Batteries Power Adapter* Ethernet Cable (Optional)
* The Remote Control and Power Adapter may vary and is dependent on your service provider.
Additional items that may be required (not included):
• Ethernet Cable
• HDMI Cable
• RF Coaxial Cable
• Digital Audio Cable
• Network Router
Kamai at a glance
Power
Indicator
SD Card
Reader
USB
Antenna/Cable
Connector (Optional)
Digital
Audio
SD Video
Connector
HDMI
Connector
Ethernet
Connector
DC Power
Jack
Factory
Reset
Power on/o
▲
◄OK►
▼
ARROW KEYS to navigate within
the menus and OK to select
■ ► || Stop / Start / Pause playback
GUIDE
Displays program guide
INFO
Displays program information
CH|PG
Changes channel up/down
MENU
Displays menu or home screen
VOL
Increases or decreases volume
BACK
Goes back one level within menus
MUTE
Mutes volume
EXIT
Exits the current menu item
Basic Remote Functions
Step 2: Connecting TV Source (Optional)
Connect to basic unencrypted Cable TV Source or Antenna Source
(Outdoor or Indoor Antenna)
S-VIDEO
Cable included
Cable not included
Composite Video
Step 1: Connecting to TV
Select only one TV option, then proceed to TV Source
Option #1 Connect via HDMI (Recommended)
Option #2 Connect via DIN-to-RCA
S-VIDEO
Cable not included
Step 3: Connecting to Network
Select only one Networking option, then proceed to Powering Up
Option #1 Connect to a Wired Network via DSL, Cable Modem or Network
Router
Cable not included
Option #2 Connect to a Wireless Network via a Wireless Network Router
NOTE: Internal Wi-Fi is an optional feature of Kamai. Please contact your
service provider for the availability and detailed instructions on the wireless
network conguration.
Connecting to Power Source
1. Connect the power cord to the POWER port on the back of the Kamai.
2. Plug the AC power adapter to a power outlet.
3. Follow the on-screen instructions.
NOTE: Make sure your TV is turned on and the
correct video input is selected.
Step 4: Powering Up
Setting Up Remote Control
1. Open the battery cover by pressing down on the battery cover latch and
sliding it o.
2. Insert the batteries, matching the “+” and “-” marks on the batteries with
the interior of the remote control.
3. Snap the battery cover to close.
NOTE: Please refer to the Remote Control Guide for details