Res Theologians PLL Wireless System Components Any system will include: = Receiver = Power supply # Auger guide Optional accessories: = Rack mount supplies * Short rack ear « Long rack sar » Link bar to mount fo similar receiver “Rack oar sulfurs «4 rack mount screws with washers [DB = Extension cables and colonnade for front-mounting antennas And, a Handheld system will include: = Microphone head (D {Optional D-58, EM-118) » Handheld transmitter © # Microphone holder 3) « 2AA batteries Body pack systems wi
“Rae Clearance PLL Wireless Receiver Features y 4 @ Front Pans! LED Indicates strength of incoming RF signal. Audio LED indicates strength of incoming audio signal. LCD display See “Programming” on page 6. Mani switch Press fo scroll through menu options. Sse* Programming ” on page 6. Set switch Press to select the currently displayed menu option. See * Programming * on page 8. Volume control. The volumes control! dial shooed generally be left in the clockwise position.
ann Channels PLL Wireless Handheld Transmitter @ Features @ Interchangeable microphone head {R port Receives infrared beam to synchronize frequencies. When using multiple systems, only one transmitter IR port should be exposed ata ime. @ LCD sere an See” Transmitter Programming * on page §. @ On-off/ mute switch Press and hold to fum on or off. Press and reseals to mute or mute. ® & Mute indicator Red: mute on @ Set switch Soe’ Transmitter Programming “on page 8.
Elnrnrrranie PLL Wireless Body pack Transmitter Features @ Antenna 5 LOD screen @ On-off/ mute switch @ Press and hold to tum on or off. Crass and release to mute or mute. @ Set switch © Valery cover 0 ® Port Receives infrared beam to synchronize frequencies. When using multiple systems, only one transmitter IR port should be exposed at a ima.
Los Channels PLL Wireless Single System Setup Follow these steps when using a single system: 1. Automatic Frequency Selection (D (menu) Scans for an available channel and sets the receiver to that channel. EY 2. Automatic Transmitter Setup [ 5.0 Exposed the IR port to the receiver, press 8.0, SQA 7’ ~ Sa Multiple System Setup Follow these spats when using multiple systems in a single installation: 1. Turn all receivers on and all transmitters off. 2. Set all receivers to the same Frequency group. 3.
Anne Channels PLL Wireless Programming 800.000 Any option displayed on screen will generally time out after five seconds. Receiver Programming Group Selection (D 2x (menu) 0. Allows manual selection of a frequency group. Pressing set increases the group number by one. When the correct frequency is displayed press 8.0.. For best results when operating multiple systems, sof all systems fo a single group; then est each system ica unique channel within that group.
Los Channels PLL Wireless — foo foo] 800.000 2 800.425 2 _— 80 1.425 [oo] 88 = Bre. Press get till GROUP and CHANNEL display begins to stalemate. Hold set and press power till MASTER displays. INCOMPATIBLE Frequency Warning The INCOMPATIBLE warning indicates that the receiver and transmitter are set fo incompatible frequency bands.
Liechtensteiner PLL Wireless ne no Transmitter Enter the Master Press and hold (set) + (power) While the” Master” is shown, release sef + power, then press power + set fo enter the “Master.” Select Frequencies in the Master Press and hold the set button till the group is flashing. Crass and release to change the frequency in 1 MHz increments. Press and hold to scroll quickly. Switch to channel select by passing the power bunion, Press and hold the set bunion {ill the channel is flashing.
Los Channels PLL Wireless Rack-Mounting Receivers The supplied mounting hardware allows an receiver to be mounted in any standard 19” audio equipment rack, Hardware {dancing) gEPFEeEe
“on amnions PLL Wireless Tips for Improving System Maintain 2 fine of sight between transmitter and antenna. Performance Avoid placing the receiver near metal surfaces or any digital equipment {CD players, computers, enc} ® Secure the AC adapter cable to the receiver using the cabs retainer loop ® if rack-mounting the receiver, grant-mount the antennas by using the extension cables and connectors.
“on amnions PLL Wireless Specifications System Operating Range Under Typical Conditions 100m {300 1.) Note: chisel range depends on RF signal baseline, satisfaction, and interlards Audio Frequency Response Minimum: 50 Hz Maxims fz {Overall system frequency depends on microphone element.) Total Harmonic Distortion (ref. 30 kHz deviation, A00Hz tone} 0.