ENERGY SAVER ISWITCH MULTIBOX OFF LINE User´s manual Í
ISWITCH MULTIBOX OFF LINE Before installing and using the iSWITCH energy saver, please read these instructions carefully and keep them for future reference. GENERAL WARNINGS AND DIRECTIONS FOR USE To ensure that our product works properly in its installation, please follow the following rules: Installation and use of the purchased product must be carried out in accordance with the technical operating conditions set out in the corresponding manual.
ISWITCH MULTIBOX OFF LINE Description The iSWITCH energy saver is an electronic unit which allows you to control and manage electric power in residential and hotel environments. It allows the power in a room to be activated after reading or detecting that a card has been inserted, for as long as the card is left in the unit. The unit is able to distinguish different types of cards, enabling different elements of the room to be controlled electronically.
ISWITCH MULTIBOX OFF LINE Installation safety information Read these instructions carefully before installing and starting up the iSWITCH energy saver. A diagram has been included to make the connections easier. Any improper connections shall be the full liability of the installation assembler and will invalidate any existing warranties. If you have any questions, please contact your nearest distributor. 1. Please read the installation instructions before installing the unit in order to avoid any errors.
ISWITCH MULTIBOX OFF LINE Characteristics Reference: Description: Power source: Energy consumption: Frequency Output relays: Dimensions: Weight: Housing: Pilot lights: Operating temperature: DEMTxABA0S iSWITCH multibox RFID OFF LINE energy saver 110 -230 VAC Nominal 30 mA, Maximum 50 mA (230 VAC) 50 – 60 Hz. 2 relays. One according to net voltage and the other one free voltage. Cutting power: 12 A, 230 V~, cos =1 8 A, 230 V~, cos = 0.6 Maximum incandescent load 10 A. Maximum halogen load 10 A.
ISWITCH MULTIBOX OFF LINE Connection diagram 6
ISWITCH MULTIBOX OFF LINE Dimensions 7
ISWITCH MULTIBOX OFF LINE ISWITCH MULTIBOX OFF LINE system’s starting up CONNECTION & TEST: 1.- Check that the iSWITCH Energy saver is connected according to the connection diagram. 2.- Power on to the Energy saver. 3.-Check the pilots are green steadily. 4.- Introduce the construction card and check that pilots turn off and that the 2 relays are on.
ISWITCH MULTIBOX OFF LINE FCC Stament In accordance with FCC part 15.105, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ISWITCH MULTIBOX OFF LINE Canadian Stament This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.