User's Guide

ManualsBrandsEnjoyTech ManualsElectronicsBuzzer clicker galaxy audience response system

Page

1. System overview

2. Product list and image

item Quantity pc(s)

Buzzer 1 set : 1-8

Master controller 1

User guide 1

adapter 1 charger for 4 buzzers

3. Specifications

Size Controller: 4.9X10.4X1.5CM;

buttons.



Wireless

Buzzer

206

stand-alone

version, which is easy-to-use response system with smart

User Manual

Summary of content (4 pages)

PAGE 1
User Manual 1. System overview Wireless Buzzer 206 is stand-alone version, which is easy-to-use response system with smart buttons. 2. Product list and image item Quantity pc(s) Buzzer 1 set : 1-8 Master controller 1 User guide 1 adapter 1 charger for 4 buzzers 3. Specifications Size Controller: 4.9X10.4X1.
PAGE 2
Buzzer: diameter 5CM，height 3.1CM Range 360 degree Distance < 10 meters Battery/recharge Master controller: 2 AAA battery buzzer: rechargeable lithium battery Note: 1 . Insert dry batteries correctly by matching the (+/-) markings ○ 2 . Remove the dry batteries when they are depleted or not using the system for a long period of time. ○ 3 . For rechargeable battery, when recharging, the red indicator light comes on. After fully charged, the green ○ light indicator light will comes on. 4.
PAGE 3
7. Other features--Set ID No. Note: ID No. already set by factory, if need change it, please follow below steps. 1 Set ID No.(Program) ○ Press “Mode” “Next No.“ button switch to set Buzz Id ( in LCD screen will show this icon /“Previous No.” button to select the number, and then, press “Start” ), and press . At the same time, press push button3 times quickly,then the buzzer green light flashes, and the master controller display “ok”. (Remark:After setting ID No.
PAGE 4
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.