E800 MS v.1.0 1 2 3 4 5 6 Enhance BOX E800 MS 7 8 L Linux www.enhance-tech.com Quick start guide © Copyright. Enhance Technology, Inc. Proudly Assembled in the U.S.A.
E800 MS 1 Quick start guide Welcome Thank you for choosing Enhance Technology Understanding your E800 MS 4 Learn and identify each component of E800 MS ! Thank you for buying!Enhance Tecenology E800 Series, A 8-bay desktop Mini SAS solution for professionals who demand exceptional data protection. Featuring up to 16TB of capacity, cable-less backplane and Mini SAS connectivity for PC and Mac.
E800 MS Quick start guide Disk Installation 5 If your system was purchased with capacity, please skip this section and immediately go to next section. If your system was purchased without disks, install each disk into the provided disk trays and fasten using the supplied hdd screws. Do not use !! any other mounting screws other than the ones provided with your system. System or disk damage may occur if using non-approved mounting hardware.
E800 MS 9 Quick start guide MiniSAS Interface Overview Connecting Your E800 MS-Host Workstation Introduction to MiniSAS Cable Types After connecting the cable to your E800 MS connect Mini SAS cable to an open port on your MiniSAS HBA or RAID controller. Currently there is no MiniSAS connector standard. The most common interface cable types are both SFF8088-to-SFF8088, and SFF8088-to-SFF8470. ! To select the right cable type, please refer to you RAID card’s documentation.
E800 MS 13 with HBA RAID controller. Please refer to your HBA RAID controller user menual for detail jogpsnbujpo/! This section is provided as a reference only. Please consult your dealer ! regarding the best choice of HBA/RAID controller for your media requirements. Quick start guide 15 Areca Technology Corporation - ARC1680x PCI-e MiniSAS RAID controller for Mac & PC. Dual SFF8088 4x interface ports. Supports 3Gb SATA disks. Requires two SFF8088-to-SFF8088 MiniSAS cables.
Three(3) Year Limited Warranty WARRANTY COVERAGE Enhance Technology’s warranty obligations are limited to the terms set forth below: workmanship under normal use for a period of Three (3) YEARS from the date of retail purchase by the original end-user purchaser ('Warranty Period").
