Wireless-N 300 + 300Mbps Long Range Ceiling Mount Dual Concurrent Access Point EAP600 Wireless-N 300 + 300Mbps Long Range Ceiling Mount Dual Concurrent Access Point V1.
1 Table of Contents 1 Introduction ..................................................................................................................................................................4 1.1 1.2 1.3 1.4 2 Before you Begin .........................................................................................................................................................9 2.1 2.2 2.3 2.4 3 Access Point Mode ..................................................................................
2 6.2 6.3 7 2.4G/5G Wireless ........................................................................................................................................................38 7.1 7.2 7.3 7.4 7.5 7.6 7.7 8 IP Settings.............................................................................................................................................................35 Spanning Tree Setting ......................................................................................................
3 Revision History Version 1.
4 1 Introduction The EAP600 is a high-powered, long-range dual-band concurrent wireless 802.11a/b/g/n access point with four major functional modes. The EAP600 is designed to operate in numerous environments from large homes, small and mediumsized businesses, multiple-floor offices, hotels and other venues to larger enterprise deployments.
5 IEEE 802.11n Compliant and Backwards Compatible with 802.11 a/b/g devices Fully compatible with IEEE 802.11 a/b/g/n devices. Multi-Function Allowing users to select any one of the following modes: Access Point, WDS AP, WDS Bridge, and Repeater depending on their specific networking deployment need.
6 12V/2A 100V~240V Power Adapter RJ-45 Ethernet LAN Cable Wall Mount Kit: Mounting Bracket, Wall/Ceiling Mounting Hardware Kit, T-Rail Mounting Hardware Kit CD with User's Manual Quick Installation Guide 1.3 System Requirements The following are the Minimum System Requirements in order configure the device. Computer with an Ethernet interface or wireless network capability Windows OS (XP, Vista, 7), Mac OS, or Linux-based operating systems Web-Browsing Application (i.e.
7 d) Frequently Changing Environments Set up networks in environments that change frequently (i.e.: Show Rooms, Exhibits, etc.). e) Small Office and Home Office (SOHO) Networks SOHO users need a cost-effective, easy and quick installation of a small network. f) Wireless Extensions to Existing Ethernet-based Networks Devices like the EAP600 enable network administrators, installers and end-users to extend the range and reach of an existing Ethernet-based network.
9 2 Before you Begin This section will guide you through the installation process. Placement of the EnGenius EAP600 is essential to maximize the access point’s performance. Avoid placing the EAP600 in an enclosed space such as a closet, cabinet, or stairwell. 2.1 Considerations for Wireless Installation The operating distance of all wireless devices cannot be pre-determined due to a number of unknown obstacles in the environment that the device is deployed in.
10 2.2 Computer Settings (in Windows XP/Windows 7) In order to use the EAP600, you must first configure the TCP/IPv4 connection of your Windows OS computer system. Click Start button and open Control Panel.
11 In Windows XP, click Network Connections In Windows 7, click View Network Status and Tasks in the Network and Internet section, then select Change adapter settings Right click on Local Area Connection and select Properties Select “Internet Protocol Version 4 (TCP/IPv4)” and then select Properties
12 Select Use the following IP address and enter an IP address that is different from the EAP600 and subnet mask then click OK. Note: Ensure that the IP address and subnet mask are on the same subnet as the device. For example: EAP600 IP address: 192.168.1.1 PC IP address: 192.168.1.2 – 192.168.1.255 PC subnet mask: 255.255.255.
13 2.3 Computer Settings in Apple Mac OS X Go to System Preferences (can be opened in the Applications folder or selecting it in the Apple Menu) Select Network in the Internet & Network section Highlight Ethernet In Configure IPv4, select Manually Enter an IP address that is different from the EAP600 and subnet mask then press OK Note: Ensure that the IP address and subnet mask are on the same subnet as the device. For example: EAP600 IP address: 192.168.1.1 PC IP address: 192.168.1.2 – 192.168.
14 2.4 Hardware Installation 1. Ensure that the computer in use has an Ethernet Controller (RJ-45 Ethernet Port). For more information, verify with your computer’s user manual. 2. Connect one end of the Category 5e Ethernet cable into the RJ-45 port of the EAP600 and the other end to the RJ-45 port of the computer. Ensure that the cable is securely connected to both the EAP600 and the computer. 3.
15 To attach the EAP600 to a ceiling or wall using the mounting bracket: 1) Attach the mounting bracket to the wall or ceiling using the provided wall/ceiling mounting hardware kit. 2) Insert the provided short screws into the bottom cover of the EAP600. Leave enough of the screws exposed to ensure that the unit can be attached to the mounting bracket.
16 1) Attach the T-rail connectors to the bottom cover of the EAP600 using the provided short screws. Two sizes of T-rail connectors are included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in (1.43cm). If extra space is required to accommodate drop ceiling tiles, use the provided spacers and long screws. 2) Line up the connected T-rail connectors with an appropriately sized rail and press the unit onto the rail until it snaps into place.
17 Note: To protect your EAP600, use the Kensington security slot to attach a cable lock (cable lock is not included).
18 Front Panel Rear Panel Front Panel Reset Button One click for reset the device. Press over 10 seconds for reset to factory default. LED Lights LED lights for WPS, WLAN 5G, WLAN 2.4G, Ethernet port and Power. Rear Panel Power DC IN for Power. Ethernet Port Ethernet port for RJ-45 cable. Ceiling (Wall) Mount Hole Using the provided hardware, the EAP600 can be attached to a ceiling or wall.
19 3 Configuring Your Access Point This section will show you how to configure the device using the web-based configuration interface. 3.1 Default Settings Please use your Ethernet port or wireless network adapter to connect the Access Point. Default Settings IP Address 192.168.1.
20 3.2 Web Configuration Open a web browser (Internet Explorer/Firefox/Safari) and enter the IP Address http://192.168.1.1 Note: If you have changed the default LAN IP Address of the Access Point, ensure you enter the correct IP Address. The default username and password are admin. Once you have entered the correct username and password, click the Login button to open the web-base configuration page. If successful, you will be logging in and see the EAP600 User Menu.
21
22 4 Building a Wireless Network The EAP600 has the ability to operate in various modes. This chapter describes the operating modes of the EAP600. 4.1 Access Point Mode In Access Point Mode, EAP600 behaves likes a central connection for stations or clients that support IEEE 802.11a/b/g/n networks. The stations and clients must be configured to use the same SSID (Service Set Identifier) and security password to associate with the EAP600.
23 4.2 WDS AP Mode The EAP600 also supports WDS AP mode. This operating mode allows wireless connections to the EAP600 using WDS technology. In this mode, configure the MAC addresses in both Access Points to enlarge the wireless area by enabling WDS Link settings. WDS supports four AP MAC addresses.
24 4.3 WDS Bridge Mode In WDS Bridge Mode, the EAP600 can wirelessly connect different LANs by configuring the MAC address and security settings of each EAP600 device. Use this mode when two wired LANs located a small distance apart want to communicate with each other. The best solution is to use the EAP600 to wirelessly connect two wired LANs, as shown in the following figure. WDS Bridge Mode can establish four WDS links, creating a star-like network.
25 4.4 Repeater mode The Repeater mode is used to regenerate or replicate signals from a wireless router or other access point/station that is unable to reach certain areas in a building. When this mode is activated in the EAP600, the EAP600 receives the wireless signal from an existing router or AP and relays it to other devices within its range so they can join the network.
26 5 Status The Status section contains the following options: Main, 2.4G/5G Wireless Client List, 2.4G/5G Connection Status, 2.4G/5G WDS Link List and System Log. The following sections describe these options. 5.1 Save/Reload This page lets you save and apply the settings shown under Unsaved changes list, or cancel the unsaved changes and revert them to the previous settings that were in effect.
27 5.2 Main Clicking the Main link under the Status menu or clicking Home at the top-right of the EAP600 Page shows the status information about the current operating mode. - The System Information section shows general system information such as Device Name, MAC Address, Current Time, Firmware Version, and Management VLAN ID (Note: VLAN ID is only applicable in Access Point or WDS AP mode).
28 - The Current 2.4G/5G Wireless Settings section shows wireless information such as Operating Mode, Frequency, and Channel. Since the EAP600 supports multiple-SSIDs, information about each SSID, the ESSID and security settings, are displayed (Note: Profile Settings is only applicable in Access Point, WDS AP).
29
30 5.3 2.4G/5G Wireless Client List Clicking the 2.4G/5G Wireless Client List link under the Status menu displays the list of clients associated to the EAP600’s 2.4GHz/5GHz, along with the MAC addresses and signal strength for each client. Clicking Refresh updates the client list. Note: Only applicable in Access Point, WDS AP, and Repeater mode.
31 5.4 2.4G/5G Connection Status Click on the 2.4G/5G Connection Status link under the Status menu. This page displays the current status of the Network, including Network Type, SSID, BSSID, Connection Status, Wireless Mode, Current Channel, Security, Data Rate, Noise Level, and Signal Strength. Note: Only applicable in Repeater mode.
32 5.5 2.4G/5G WDS Link List Click on the 2.4G/5G WDS Link List link under the Status menu. This page displays the current status of the WDS link, including WDS Link ID, MAC Address, Link Status and RSSI. Note: Only applicable in WDS AP and WDS Bridge mode.
33 5.6 System Log The EAP600 automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the System Log link under the Status menu. If there is not enough internal memory to log all events, older events are deleted from the log. When powered down or rebooted, the log will be cleared. System Log Refresh Update the log. Clear Clear the log.
34 6 System 6.1 Operation Mode The EAP600 supports four operating modes: Access Point, WDS AP, WDS Bridge, and Repeater. System Properties Device Name Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not broadcast to other devices. Operation Mode Use the radio button to select an operating mode. Save & Apply / Cancel Click Save & Apply to confirm the changes or Cancel to cancel and return previous settings.
35 6.2 IP Settings This page allows you to modify the device's IP settings. IP Settings IP Network Setting Select whether the device IP address will use the static IP address specified in the IP Address field or be obtained automatically when the device connects to a DHCP server. IP Address The IP Address of this device. IP Subnet Mask The IP Subnet Mask of this device. Default Gateway The Default Gateway of this device. Leave it blank if you are unsure of this setting.
36 6.3 Spanning Tree Setting This page allows you to modify the Spanning Tree settings. Enabling Spanning Tree protocol will prevent network loops in your LAN network. Spanning Tree Spanning Tree Status Enable or disable the Spanning Tree function. Bridge Hello Time Specify Bridge Hello Time, in seconds. This value determines how often the device sends handshake packets to communicate information about the topology throughout the entire Bridged Local Area Network.
37 Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
38 7 2.4G/5G Wireless 7.1 Wireless Network This page displays the current status of the Wireless settings of the EAP600.
39 2.4G/5G Wireless Network (Access Point / WDS AP mode) Wireless Mode Wireless mode supports 802.11b/g/n mixed mode in 2.4G and 802.11a/n mixed mode in 5G. Channel HT Mode The default channel bandwidth is 20/40MHz. The larger the channel, the better the transmission quality and speed. Extension Channel Select upper or lower channel. Your selection may affect the Auto channel function. Channel / Frequency Select the channel and frequency appropriate for your country’s regulation.
40 AP Detection AP Detection can select the best channel to use by scanning nearby areas for Access Points. Current Profile Configure up to eight different SSIDs (four in WDS AP mode). If many client devices will be accessing the network, you can arrange the devices into SSID groups. Click Edit to configure the profile and check whether you want to enable extra SSID. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
41 2.
42 2.4G/5G SSID Profile SSID Specify the SSID for the current profile. Suppressed SSID Check this option to hide the SSID from clients. If checked, the SSID will not appear in the site survey. Station Separation Click the appropriate radio button to allow or prevent communication between client devices. Wireless Security See the Wireless Security section. Save / Cancel Click Save to accept the changes or Cancel to cancel and return previous settings.
43 Repeater mode:
44 2.4G/5G Wireless Network (Repeter mode) Wireless Mode Wireless mode supports 802.11b/g/n mixed mode in 2.4G and 802.11a/n mixed mode in 5G. SSID The SSID is a unique named shared amongst all the points of the wireless network. The SSID must be identical on all points of the wireless network and cannot exceed 32 characters. You may specify an SSID or select one from the Site Survey. Site Survey Click on Site Survey to search the existing Access Points.
45 7.2 Wireless Security The Wireless Security section lets you configure the EAP600's security modes: WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. It is strongly recommend to use WPA2-PSK. WEP Encryption: WEP Encryption Auth Type Select Open System or Shared Key. Input type ASCII: Regular Text (recommended) HEX: Hexadecimal Numbers (For advanced users) Key Length Select the desired option and ensure the wireless clients use the same setting.
46 others are optional. WPA-PSK (WPA Pre-Shared Key) Encryption: WPA-PSK (WPA Pre-Shared Key) Encryption Encryption Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings. Passphrase Wireless clients must use the same key to associate the device. If using ASCII format, the Key must be from 8 to 63 characters in length. If using HEXformat, the Key must be 64 HEX characters in length.
47 WPA Encryption Encryption Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings. Radius Server Enter the IP address of the Radius server. Radius Port Enter the port number used for connections to the Radius server. Radius Secret Enter the secret required to connect to the Radius server. Group Key Update Interval Specify how often, in seconds, the group key changes. Radius Accounting Enable or disable accounting feature.
48 Interim Accounting Interval Specify how often, in seconds, the accounting data sends. Note: 802.11n does not allow WEP/WPA-PSK TKIP/WPA2-PSK TKIP security mode. The connection mode will automatically change from 802.11n to 802.11g.
49 7.3 Site Survey Use this feature to scan nearby Access Points. Note: Only applicable in Repeater mode. 1. Click Site Survey. 2.
50 3. The EAP600 will list the available access points after site survey.
51 BSSID Access Point's wireless MAC address. SSID SSID that the Access Point is broadcasting. Channel Channel that the Access Point is using. Signal Level (dBm) Signal strength from the Access Point to your station. Type The band that the Access Point is using. Security Encryption method that the Access Point is using to secure data over the WLAN. Refresh Click Refresh to rescan nearby Access Point. 4. Select an Access Point and click that Access Point’s BSSID. 5.
52
53 7.4 Wireless MAC Filtering Wireless MAC Filtering is used to allow or deny network access to wireless clients (computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses. You can manually add a MAC address to restrict the permission to access EAP600. The default setting is Disable Wireless MAC Filter. Note: Only applicable in Access Point and WDS AP mode.
54 ACL Mode Determines whether network access is granted or denied to clients whose MAC addresses appear in the MAC Address table on this page. Choices are: Disabled, Deny MAC in the list, or Allow MAC in the list. MAC Address Enter the MAC address of the wireless client. Add Click Add to add the MAC address to the MAC Address table. Delete Delete the selected entries. Apply Click Apply to apply the changes.
55 7.5 Wireless Advanced This page allows you to configure wireless advance settings. It is recommended that the default settings are used unless the user has experience with more advanced networking features. 2.
56 Data Rate Select a data rate from the drop-down list. The data rate affects throughput of data in the EAP600. The lower the data rate, the throughput will be lower, but so will the transmission distance. RTS/CTS Threshold Specify the threshold package size for RTC/CTS. A small number causes RTS/CTS packets to be sent more often and consumes more bandwidth. Distance Specify the distance between Access Points and clients. Longer distances may drop high-speed connections.
57 7.6 WPS (Wi-Fi Protected Setup) Wi-Fi Protected Setup (WPS) feature complies with the Wi-Fi Alliance WPS standard and makes it easier to quickly add client devices to an established, security-enabled Wi-Fi network. WPS reduces the user steps required to configure a network and supports two methods that are familiar to most consumers to configure a network and enable security. Note: Only applicable in Access Point and WDS AP mode.
58 WPS (Wi-Fi Protected Setup) WPS Select to Enable or Disable the WPS feature. WPS Current Status Shows whether the WPS function is Configured or unConfigured. When it is Configured, the WPS has been used to authorize connection between the device and wireless clients. Self Pin Code The PIN code of this device. SSID The SSID (wireless network name) used when connecting using WPS. Authentication Mode Shows the encryption method used by the WPS process.
59 WPS via PIN Enter the PIN code of the wireless device and click this button to initialize WPS feature using the PIN method.
60 7.7 WDS Link Settings Using WDS (Wireless Distribution System) will allow a network administrator or installer to connect to Access Points wirelessly. Doing so will extend the wired infrastructure to locations where cabling is not possible or inefficient to implement. Note: Compatibility between different brands and models of access points is not guaranteed. It is recommended that the WDS network be created using the same models for maximum compatibility.
61 2.4G/5G WDS Link Settings Security Select None or AES from drop-down list. AES Passphrase Enter the key values you wish to use. Other AP(s) must use the same key to establish WDS link. MAC Address Enter the Access Point’s MAC address to which you want to extend the wireless area. Mode Select Disable or Enable from the drop-down list. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
62 8 Management 8.1 Administration This page allows you to change the EAP600 username and password. By default, the username is admin and the password is: admin. The password can contain 0 to 12 alphanumeric characters and is case sensitive. Login Setting New Name Enter a new username for logging in to the New Name entry box. Old Password Enter the old password for logging in to the Old Password entry box. New Password Enter the new password for logging in to the New Password entry box.
63 8.2 Management VLAN Settings This page allows you to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on VLAN do not have to be physically located next to one another on the LAN. Note: Only applicable in Access Point and WDS AP mode.
64 Management VLAN (Only applicable in Access Point mode) Profile Isolation Restricted client to communicate with different VID by selecting the radio button. VLAN ID Specify the VLAN tag for each profile. Management VLAN ID If your network includes VLANs, you can specify a VLAN ID for packets pass through the Access Point with a tag. Otherwise, select No VLAN tag. Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings. Note: 1.
65 8.3 Wireless Traffic Shaping Traffic shaping regulates the flow of packets leaving an interface to deliver improved Quality of Service. Wireless Traffic Shaping Enable Traffic Shaping Check this option to enable wireless traffic shaping. Incoming Traffic Limit Specify the wireless transmission speed used for downloading. Outgoing Traffic Limit Specify the wireless transmission speed used for uploading.
66 8.4 SNMP Settings This page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for Simple Network Management Protocol (SNMP). This is a networking management protocol used to monitor network attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of the network. Upon receiving these messages, SNMP compatible devices (called agents) return the data stored in their Management Information Bases.
67 SNMP SNMP Enable/Disable Enable or Disable SNMP feature. Contact Specify the contact details of the device Location Specify the location of the device. Community Name (Read Only) Specify the password for the SNMP community for read only access. Community Name (Read/Write) Specify the password for the SNMP community with read/write access. Trap Trap Destination Address Specify the IP address of the computer that will receive the SNMP traps.
68 8.5 Backup/Restore This page allows you to save the current device configurations. When you save the configurations, you also can reload the saved configurations into the device through the Restore Saved Settings from A File section. If extreme problems occur, or if you have set the EAP600 wrongly, you can use the Factory Default button in the Revert to Factory Default Settings section to restore all the configurations of the EAP600 to the original default settings.
69 8.6 Auto Reboot Settings You can specify how long to reboot the EAP600 periodically. Auto Reboot Settings Auto Reboot Setting Enable or disable the auto reboot function. Frequency of Auto Reboot To specify the time to reboot the EAP600 by Min, Hour, Day or Week. Save/Apply / Cancel Click Save/Apply to apply the changes or Cancel to return previous settings.
70 8.7 Firmware Upgrade This page allows you to upgrade the firmware of the EAP600. To perform the Firmware Upgrade: 1. Click the Browse button and navigate the OS File System to the location of the upgrade file. 2. Select the upgrade file. The name of the file will appear in the Upgrade File field. 3. Click the Upload button to commence the firmware upgrade. Note: The device is unavailable during the upgrade process and must restart when the upgrade is completed.
71 8.8 Time Setting This page allows you to set the internal clock of the EAP600. Time Manually Set Date and Time Manually specify the date and time. Automatically Get Date and Time Select a time zone from the drop-down list and check whether you want to enter the IP address of an NTP server or use the default NTP server to get have the internal clock set automatically. Enable Daylight Saving Check whether daylight savings applies to your area.
72 8.9 Log This page allows you to setup Syslog and local log functions of the EAP600. Log Syslog Enable or disable the syslog function. Log Server IP Address Enter the IP address of the log server. Local Log Enable or disable the local log service. Save/Apply / Cancel Click Save/Apply to apply the changes or Cancel to return previous settings.
73 8.10 Diagnostics This page allows you to analyze the connection quality of the EAP600 and trace the routing table to a target in the network. Diagnosis Target IP Enter the IP address you would like to search. Ping Packet Size Enter the packet size of each ping. Number of Pings Enter the number of times you want to ping. Start Ping Click Start Ping to begin pinging target device (via IP). Traceroute Target Enter an IP address or domain name you want to trace.
74 8.11 LED Control This page allows you to control LED on/off for Power, LAN interface, 2.4G/5G WLAN interface and WPS.
75 8.12 Logout Click [Logout] in Management menu to logout.
76 8.13 Reset In some circumstances, it may be required to force the device to reboot. Click on Reboot the Device to reboot the EAP600.
77 Appendix A – FCC Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
78 Appendix B – IC Interference Statement Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
79 Appendix C – CE Interference Statement Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
80 the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 0560 Česky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] Ελληνική [Greek] Français [French] Italiano [Italian] Latviski [Latvian] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
81 Lietuvių [Lithuanian] Nederlands [Dutch] Malti [Maltese] Magyar [Hungarian] Polski [Polish] Português [Portuguese] Slovensko [Slovenian] Slovensky [Slovak] Suomi [Finnish] Svenska [Swedish] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
