User's Manual

ManualsBrandsENERNET ManualsElectronicsWireless Thermostat

Thermostats

Wireless Digital Programmable

ge.com

Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Exiting Program Mode . . . . . . . . . . . . . . . . . . . . . . . . . .9

Frequently Asked Questions . . . . . . . . . . . . . . . .13–14

Important Safety Information . . . . . . . . . . . . . . . . . . .2

Installing or Removing Receiver . . . . . . . . . . . .10–12

Introduction Overview . . . . . . . . . . . . . . . . . . . . . . . . . .3

Navigating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7–8

Run Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

RAK348R1 – Receiver

RAK348T1 – Thermostat

RAK364R1 – Receiver

RAK364T1 – Thermostat

Owner’s Manual

49-7574 06-07 JR

Español

Para consultar una version

en español de este manual

de instrucciones, visite nuestro

sitio de internet ge.com.

Française

Pour une version française de

ce manuel d’utilisation, veuillez

visiter notre site web à l’adresse

www.electromenagersge.ca

with Receivers

49-7574 v07 6/15/07 9:39 AM Page 1

Summary of content (16 pages)

PAGE 1
49-7574 v07 6/15/07 9:39 AM Page 1 with Receivers Thermostats Wireless Digital Programmable ge.com Owner’s Manual RAK348R1 – Receiver RAK348T1 – Thermostat RAK364R1 – Receiver RAK364T1 – Thermostat Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Clock . . . . . . . . . . . . . . . .
PAGE 2
49-7574 v06 6/7/07 9:44 AM Page 2 Important safety information. WARNING! Always turn off power at the main power supply before installing or removing the thermostat receiver. GE IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS EQUIPMENT COMPLIES WITH PART 15 OF THE FCC RULES.
PAGE 3
49-7574 v06 6/7/07 9:44 AM Page 3 INTRODUCTION OVERVIEW THERMOSTAT CONTROL – Front Includes program period – Morning, Day, Evening, Night Time and day of week Toggles display – Fahrenheit/Celsius F/C 11: 20 AM OFF Day Puts thermostat into the program setup mode Starts and stops the program – Holds Set Point when program is not running O PGM Run Operating mode indication – HEAT, COOL, OFF RF connection with a control mode Indicates holding of Set Point temperature – See Run button COOL Th Set P
PAGE 4
9-7574 v06 6/7/07 9:44 AM Page 4 Introduction. This two-part wireless thermostat system is designed to provide precision temperature control without the installation headaches and expense of wiring. Powered by four AA batteries, the thermostat will operate for approximately 1 year, and can be mounted in any suitable location that will ensure good temperature control.
PAGE 5
49-7574 v06 6/7/07 9:44 AM Page 5 Buttons. A four-button cluster is located on the front of the thermostat. Fan Up Down Heat Cool These buttons are used in adjusting fan operation, changing Mode of the set point temperature up or down and changing the operation operating mode of the thermostat. To the right are the Set Point display items that are changed by the four buttons in 70 normal operation.
PAGE 6
49-7574 v06 6/7/07 9:44 AM Page 6 Setting the clock. In all set-up modes, the thermostat will flash the display item you are about to change. The UP and DOWN buttons change settings, the HEAT/COOL button is used to move to the next item. To set the clock, you will use the buttons marked CLOCK, UP, DOWN and HEAT/COOL. Step One Press the CLOCK button. The hour digits will flash. Press the UP or DOWN button to change the hour. Note that AM/PM will change as you roll the hour past 12.
PAGE 7
49-7574 v06 6/7/07 9:44 AM Page 7 Thermostat programming. The thermostat provides four program periods: Morning, Day, Evening and Night. A time and temperature can be set for each period. Upon initial power up, the thermostat loads time and temperature program default parameters for weekday and weekend days of the week.
PAGE 8
49-7574 v06 6/7/07 9:44 AM Page 8 Thermostat programming (cont.). Step One Press the PROGRAM button to put the thermostat into the programming mode. The display will blink all of the day-of-the-week icons. Pressing the UP or DOWN button will toggle between the weekday icons and the weekend icons. Ensure the display is blinking the one you want to program. Press HEAT/COOL. Step Two Next, the morning period will blink.
PAGE 9
49-7574 v06 6/7/07 9:44 AM Page 9 Navigating. You can quickly step through to a specific item you want to change by pressing the HEAT/COOL button until the item you want to change is flashing. When the item you want to change is flashing, use the UP or DOWN button to make your change. Exiting program mode. Pressing the PROGRAM button at any time will exit you out of the programming mode, save your changes to memory and return you to normal thermostat operation. Run button – program/manual operation.
PAGE 10
49-7574 v06 6/7/07 9:44 AM Page 10 Installing or removing receiver. The thermostat and receiver will not operate as a system until they are linked together through the installation process. The linking process binds one or more receivers to a thermostat so that they will communicate with each other as a control system. Up to eight (8) receivers can be linked to a single thermostat. Until linked, a control receiver will not operate.
PAGE 11
49-7574 v06 6/7/07 9:44 AM Page 11 Installing or removing receiver (cont.). A. Press the SW4-INSTALL button inside the thermostat. Press the HEAT/COOL button on the front of the thermostat to select your choice. Press the UP button to set the receiver number (0-7) and press the HEAT/COOL button to set the receiver. B. Press the SW9-LINK button inside the thermostat. Within 5 seconds, press the RESET/LINK button (PB3) on the receiver. The “Good” message will appear if linked.
PAGE 12
49-7574 v06 6/7/07 9:44 AM Page 12 Installing or removing receiver (cont.). Thermostat Installation Reset If there is difficulty installing a receiver, perform the following: Step One Press the SW4-INSTALL button inside the thermostat. The ”Install“ icon will flash. You only need to begin the installation session to perform this reset. Step Two Press and hold the PB1-NETWORK button on the inside of the thermostat board for approximately 2 seconds. No response is displayed.
PAGE 13
49-7574 v06 6/7/07 9:44 AM Page 13 Frequently asked questions. “Where should I locate my thermostat?” For best results, the thermostat should be located approximately five feet above the floor on an inside wall in an area with good air circulation. A thermostat should not be located where air is stagnating, such as behind doors, in corners or under cabinets. Hot or cold drafts from air ducts and windows should be avoided. Avoid direct heat from the sun, lighting fixtures, appliances, fireplaces, etc.
PAGE 14
49-7574 v06 6/7/07 9:44 AM Page 14 Frequently asked questions (cont.). “I just installed the thermostat and the antenna symbol goes on and off. What should I do?” A weak RF signal between the thermostat and one or more receivers is the cause. The further away the thermostat and receiver are from each other, the weaker the signal. Distance and/or something shielding or blocking the RF signal is the likely cause. Distance is typically not a problem.
PAGE 15
49-7574 v06 6/7/07 9:44 AM Page 15 Troubleshooting tips. Problem Solution No display Make sure batteries are fresh and installed correctly. See the “Batteries” section in this manual. System fan does not come on properly Verify that wiring is correct. Program schedule activates Check time (AM/PM) set on thermostat (see Programming).
PAGE 16
49-7574 v09 6/28/07 10:51 AM Page 16 Thermostat Warranty. Staple your receipt here. Proof of the original purchase date is needed to validate the warranty. For The Period Of: GE Will Replace: One Year Limited From the date of the original purchase Full Replacement of the thermostat which fails due to a defect in materials or workmanship. What GE Will Not Cover: ■ Service trips to your location. ■ Improper installation. If you have an installation problem, contact your installer.