Owner Manual

ManualsBrandsEnergetic Lighting ManualsCeiling Lights4" Selectable CCT Remodel IC LED Retrofit Recessed Lighting Kit

CCT SELECTABLE

RECESSED DOWNLIGHT

Installation Instructions

Model # E3DL15P56 series

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-492-6566.

Item Number

Purchase Date

ATTACH YOUR RECEIPT HERE

www.energeticlighting.com

5 or 6 Inch

Summary of content (4 pages)

PAGE 1
Model # E3DL15P56 series CCT SELECTABLE RECESSED DOWNLIGHT 5 or 6 Inch Installation Instructions ATTACH YOUR RECEIPT HERE Item Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-492-6566. www.energeticlighting.
PAGE 2
SAFETY INFORMATION PACKAGE CONTENTS A Part A Adapter B Lamp Item Name Qty. 1 1 B DIMMER COMPATIBILITY LIST This downlight can be used with most dimmers to create your desired ambience with smooth dimming to 10% of full light levels. Brand LUTRON LUTRON LUTRON LUTRON LUTRON LEGRAND LEGRAND EATON Model DVCL-153P MACL-153MLH DV-600P MSCL-0P153MH MSCL-VP153MH RHCL453PTCCCV6 RHCL703PTCCCV4 SAL06P3 Visit www.energeticlighting.com for an updated dimmer compatibility list.
PAGE 3
INSTALLATION INSTRUCTIONS PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. 3. Before proceeding to the next step, set the desired color temperature (CCT), using the slide switch on the back of the housing.
PAGE 4
INSTALLATION INSTRUCTIONS 6. Carefully route wires into can fixture and hook both sets of spring clip arms into the arm hooks on the inside walls of the can, once secured inside the hooks, release spring clip arms and gently push the downlight (B) up into the can until flush against the ceiling surface. B Fig. 5 CARE AND MAINTENANCE Clean with a mild, non-abrasive glass cleaner and soft cloth. Do NOT use solvents or cleaners containing abrasive agents.