unbekannt unbekannt Products Solutions Services Technical Information Micropilot FMR66B HART Free space radar Level measurement in bulk solids Application • • • • • • Continuous, non-contact level measurement of powdered to granular bulk solids Process connections: Thread or mounting bracket Maximum measuring range: 50 m (164 ft) Temperature: –20 to +200 °C (–4 to +392 °F) Pressure: –1 to +3 bar (–14.5 to +43.5 psi) Accuracy: ±3 mm (±0.
Micropilot FMR66B HART Table of contents Important document information . . . . . . . . . . . . . . . 4 Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Graphic conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Process pressure range . . . . . . . . . . . . . . . . . . . . . . . . . 23 Dielectric constant . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Micropilot FMR66B HART Memograph M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RN42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 51 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Document function . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Registered trademarks . . . . . . . . . . . . . . . . . . . . . . 52 Endress+Hauser V. 1, Rev.
Micropilot FMR66B HART Important document information Symbols Safety symbols DANGER This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in serious or fatal injury. WARNING This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious or fatal injury. CAUTION This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in minor or medium injury.
Micropilot FMR66B HART • Installation, explosion and electrical connection drawings are presented in simplified format • Devices, assemblies, components and dimensional drawings are presented in reduced-line format • Dimensional drawings are not to-scale representations; the dimensions indicated are rounded off to 2 decimal places • Unless otherwise described, flanges are presented with sealing surface form EN1091-1, B2; ASME B16.
Micropilot FMR66B HART D = (c ∆t) / 2 where c is the speed of propagation of the wave. In summary, D can be calculated from the measured difference frequency Δf. D is then used to determine the content of the tank or silo. Input Measured variable The measured variable is the distance between the reference point and the product surface. The level is calculated based on "E", the empty distance entered. Measuring range The start of the measuring range is the point where the beam hits the floor.
A Micropilot FMR66B HART B H 100% 0% C A0031829 A B C H Antenna tip + 10 mm (0.4 in) Smallest possible measuring range Distance above silo floor = 50 to 80 mm (1.97 to 3.15 in) Silo height > 0.7 m (2.3 ft) For the dielectric constants (DC values) of many media commonly used in industry, please refer to: • Dielectric constant (DC value) Compendium CP01076F • The Endress+Hauser "DC Values app" (available for Android and iOS) Operating frequency Approx.
Micropilot FMR66B HART Signal on alarm Current output Failure mode (according to NAMUR Recommendation NE 43): • Minimum alarm (= factory setting): 3.
Micropilot FMR66B HART HART specification: 7 DD version: 1 Device description files (DTM, DD) Information and files under: • www.endress.com On the product page for the device: Documents/Software → Device drivers • www.fieldcommgroup.org HART load: Min.
Micropilot FMR66B HART Power supply Terminal assignment Single compartment housing 3 2 - 1 + A0042594 3 1 2 3 Connection terminals and ground terminal in the connection compartment Positive terminal Negative terminal Internal ground terminal Dual compartment housing - + 3 2 1 A0042803 4 1 2 3 10 Connection terminals and ground terminal in the connection compartment Positive terminal Negative terminal Internal ground terminal V. 1, Rev.
Micropilot FMR66B HART Dual compartment housing, L-form - + 3 2 1 A0045842 5 1 2 3 Terminals Connection terminals and ground terminal in the connection compartment Positive terminal Negative terminal Internal ground terminal • Supply voltage and internal ground terminal: 0.5 to 2.5 mm2 (20 to 14 AWG) • External ground terminal: 0.5 to 4 mm2 (20 to 12 AWG) In the case of devices with a plug, it is not necessary to open the housing for connection purposes.
Micropilot FMR66B HART Measuring devices with Harting plug Han7D A – B + 8 + – 7 6 1 2 5 3 4 Han7D + – A0041011 A B + Electrical connection for devices with Harting plug Han7D View of the plug-in connection on the device Brown Green/yellow Blue Material CuZn, gold-plated plug-in jack and plug contacts Supply voltage The supply voltage depends on the selected type of device approval Non-hazardous, Ex d, Ex e 10.5 to 35 VDC Ex i 10.
Micropilot FMR66B HART LWARNING Explosion Hazard! ‣ Please refer to the separate documentation on applications in hazardous areas for the safety instructions. For optimum electromagnetic compatibility: • Keep the potential matching line as short as possible • Observe a cross-section of at least 2.
Micropilot FMR66B HART Overvoltage category Overvoltage category II Performance characteristics Reference operating conditions • • • • • Temperature = +24 °C (+75 °F) ±5 °C (±9 °F) Pressure = 960 mbar abs. (14 psia) ±100 mbar (±1.45 psi) Humidity = 60 % ±15 % Reflector: metal plate with diameter ≥ 1 m (40 in) No major interference reflections inside the signal beam Maximum measured error Reference accuracy The devices are optimized for bulk solid applications on delivery.
Micropilot FMR66B HART • Digital: 1 mm • Analog: 1 µA Response time According to DIN EN IEC 61298-2 / DIN EN IEC 60770-1 , the step response time is the time following an abrupt change in the input signal up until the changed output signal has adopted 90 % of the steady-state value for the first time. The response time can be configured.
Micropilot FMR66B HART Orientation Internal vessel fittings α A0031814 Avoid internal fittings (point level switches, temperature sensors, struts, vacuum rings, heating coils, baffles etc.) inside the signal beam. Pay attention to the beam angle α. Avoiding interference echoes A0031817 16 V. 1, Rev.
Micropilot FMR66B HART Metal deflector plates, installed at an angle to scatter the radar signals, help prevent interference echoes. Vertical alignment of antenna axis Align the antenna so that it is perpendicular to the product surface. The maximum reach of the antenna can be reduced, or additional interference signals can occur, if the antenna is not installed perpendicular to the product.
Micropilot FMR66B HART D Hmax 100 to 150 mm (4 to 6 in) 1 450 mm (58 in) ≥150 mm (6 in) 2 200 mm (88 in) In the case of longer nozzles, reduced measuring performance must be expected. Please note the following: • The end of the nozzle must be smooth and free from burrs. • The edge of the nozzle should be rounded. • Mapping must be performed. • Please contact the manufacturer's support department for applications with nozzles that are higher than indicated in the table.
Micropilot FMR66B HART Drip-off, PTFE 50 mm (2 in) antenna, α = 6 ° D W = D × 0.10 α D W 5 m (16 ft) 0.52 m (1.70 ft) 10 m (33 ft) 1.04 m (3.41 ft) 15 m (49 ft) 1.56 m (5.12 ft) 20 m (66 ft) 2.08 m (6.82 ft) 25 m (82 ft) 2.60 m (8.53 ft) 30 m (98 ft) 3.12 m (10.24 ft) 35 m (115 ft) 3.64 m (11.94 ft) 40 m (131 ft) 4.16 m (13.65 ft) 45 m (148 ft) 4.68 m (15.35 ft) 50 m (164 ft) 5.20 m (17.
Micropilot FMR66B HART Environment Ambient temperature range The following values apply up to a process temperature of +85 °C (+185 °F). At higher process temperatures, the permitted ambient temperature is reduced.
Micropilot FMR66B HART Ta P1 P2 P3 P5 P4 Tp A0048826 9 P1 P2 P3 P4 P5 Plastic housing material; process temperature range: 0 to +80 °C (+32 to +176 °F) with CSA C/US approval = = = = = Tp: Tp: Tp: Tp: Tp: 0 °C (+32 °F) | Ta: +76 °C (+169 °F) | +80 °C (+176 °F) | +80 °C (+176 °F) | 0 °C (+32 °F) | Ta: +76 °C (+169 °F) Ta: +76 °C (+169 °F) Ta: +75 °C (+167 °F) Ta: 0 °C (+32 °F) 0 °C (+32 °F) Process temperature range: –40 to +130 °C (–40 to +266 °F) Ta P1 P2 P3 Tp P5 P4 A0032024 10 P1 P2 P3 P
Micropilot FMR66B HART Ta P1 P2 P3 Tp P5 P4 A0032024 12 P1 P2 P3 P4 P5 = = = = = Aluminum housing material; process temperature range: –40 to +80 °C (–40 to +176 °F) Tp: Tp: Tp: Tp: Tp: –40 °C (–40 °F) | Ta: +79 °C (+174 °F) +79 °C (+174 °F) | Ta: +79 °C (+174 °F) +80 °C (+176 °F) | Ta: +79 °C (+174 °F) +80 °C (+176 °F) | Ta: –40 °C (–40 °F) –40 °C (–40 °F) | Ta: –40 °C (–40 °F) Order option; process temperature range: –40 to +130 °C (–40 to +266 °F) Ta P1 P2 P3 Tp P5 P4 A0032024 13 P1 P2 P
Micropilot FMR66B HART Installation height as per IEC61010-1 Ed.3 • Generally up to 2 000 m (6 600 ft) above sea level • Over 2 000 m (6 600 ft) under the following conditions: • Supply voltage < 35 VDC • Power supply, overvoltage category 1 Degree of protection Test as per IEC 60529 and NEMA 250-2014 Housing and process connection IP66/68, TYPE 4X/6P (IP68: (1.
Micropilot FMR66B HART Encapsulated antenna, PVDF, 40 mm (1.5 in) Process connection thread 1-½" Seal Tp Process pressure range PVDF encapsulated –40 to +80 °C (–40 to +176 °F) –1 to 3 bar (–14.5 to 43.5 psi) PVDF encapsulated –40 to +130 °C (–40 to +266 °F) –1 to 3 bar (–14.5 to 43.5 psi) The following temperature restriction applies for devices with the dust ignition-proof approval category 1D, 2D or 3D A0047831 PVDF encapsulated –20 to +80 °C (–4 to +176 °F) –1 to 3 bar (–14.5 to 43.
Micropilot FMR66B HART Process connection UNI flange 316L Seal Tp Process pressure range FKM Viton GLT –40 to +150 °C (–40 to +302 °F) –1 to 3 bar (–14.5 to 43.5 psi) FKM Viton GLT –40 to +200 °C (–40 to +392 °F) –1 to 3 bar (–14.5 to 43.5 psi) A0047726 The pressure range may be further restricted in the event of a CRN approval. Dielectric constant For bulk solids εr ≥ 1.6 Contact Endress+Hauser for applications with lower dielectric constants than indicated.
Micropilot FMR66B HART Aluminum single compartment housing !101 (3.98) 1 3 124 (4.88) 127 (5) 138 (5.43) 2 45 (1.77) 125 (4.92) ESC - + E A0038380 16 1 2 3 26 Dimensions of aluminum single compartment housing Height with cover with glass viewing window (devices for Ex d, dust Ex) Height with cover with plastic viewing window Cover without viewing window V. 1, Rev.
Micropilot FMR66B HART Dual compartment housing 132 (5.2) 121 (4.76) 115 (4.53) 118 (4.65) 131 (5.16) 127 (5) 2 !101 (3.98) 3 ESC - + E 1 64 (2.52) 54 (2.13) 78 (3.07) 143 (5.63) A0038377 17 1 2 3 Endress+Hauser Dimensions of dual compartment housing Height with cover with glass viewing window (devices for Ex d, dust Ex) Height with cover with plastic viewing window Cover without viewing window V. 1, Rev.
Micropilot FMR66B HART Dual compartment housing, L-form 133 (5.24) 130 (5.12) 110 (4.33) 3 2 144 (5.67) !101 (3.98) !101 (3.98) 1 140 (5.51) 138 (5.43) ESC - + E A0038381 18 1 2 3 Dimensions of dual compartment housing, L-form Height with cover with glass viewing window (devices for Ex d, dust Ex) Height with cover with plastic viewing window Cover without viewing window Encapsulated antenna, PVDF, 40 mm (1.5 in) R 105.4 (4.15) 50 mm 72.2 (2.84) 50.2 (1.98) 1 !43.7 (1.
Micropilot FMR66B HART Encapsulated antenna, PVDF, 40 mm (1.5 in), process connection UNI flange 72.2 (2.84) 50 mm R 105.4 (4.15) 52.2 (2.06) 1 !43.7 (1.72) A0048829 20 R 1 Dimensions of encapsulated antenna, PVDF, 40 mm (1.5 in), process connection UNI flange. Unit of measurement mm (in) Reference point of measurement Bottom edge of housing UNI flange 3"/DN80/80A G 1 1/2 !200 (7.9) !160 (6.3) !150 (5.9) 19 (0.75) 45° 20 (0.79) A0048847 21 Dimensions of UNI flange 3"/DN80/80A.
Micropilot FMR66B HART UNI flange 4"/DN100/100A G 1 1/2 !228.6 (9) !190.5 (7.5) !175 (6.9) 19 (0.75) 45° 20 (0.79) A0048848 22 Dimensions of UNI flange 4"/DN100/100A. Unit of measurement mm (in) Suitable for ASME B16.5, 4" 150lbs / EN1092-1; DN100 PN16 / JIS B2220; 10K 100A Material: PP, weight 0.70 kg (1.54 lb) UNI flange 6"/DN150/150A G 1 1/2 !285 (11.2) !241.3 (9.5) !240 (9.4) 23 (0.9) 45° 20 (0.79) A0048849 23 Dimensions of UNI flange 6"/DN150/150A.
Micropilot FMR66B HART Drip-off antenna 50 mm (2 in), threaded process connection A B 1 L2 22 (0.87) L1 1 R 78 (3.07) 55 mm !42.5 (1.67) A0046479 24 A B 1 R L1 L2 Endress+Hauser Dimensions of Drip-off antenna 50 mm (2 in), threaded process connection. Unit of measurement mm (in) Process temperature version ≤150 °C (302 °F) Process temperature version ≤200 °C (392 °F) Bottom edge of housing Reference point of measurement 97 mm (3.82 in); version with Ex d or XP approval +5 mm (+0.
Micropilot FMR66B HART Drip-off antenna 50 mm (2 in), UNI flange process connection A B 1 L1 L4 L2 L3 1 78 (3.07) R !42.5 (1.67) A0046480 25 A B 1 R L1 L2 L3 L4 Dimensions of Drip-off antenna 50 mm (2 in), UNI flange process connection. Unit of measurement mm (in) Process temperature version ≤150 °C (302 °F) Process temperature version ≤200 °C (392 °F) Bottom edge of housing Reference point of measurement 175 mm (6.89 in); version with Ex d or XP approval +5 mm (+0.20 in) 77 mm (3.
Micropilot FMR66B HART UNI flange 4"/DN100/100A G 1 1/2 !228.6 (9) !190.5 (7.5) !175 (6.9) 19 (0.75) 45° 20 (0.79) A0048848 27 Dimensions of UNI flange 4"/DN100/100A. Unit of measurement mm (in) Suitable for ASME B16.5, 4" 150lbs / EN1092-1; DN100 PN16 / JIS B2220; 10K 100A Material: • PP, weight 0.70 kg (1.54 lb) • 316L, weight 5.80 kg (12.79 lb) UNI flange 6"/DN150/150A G 1 1/2 !285 (11.2) !241.3 (9.5) !240 (9.4) 23 (0.9) 45° 20 (0.
Micropilot FMR66B HART Dual compartment housing • Aluminum: 1.4 kg (3.09 lb) • Stainless steel: 3.3 kg (7.28 lb) Dual compartment housing, L-form 1.7 kg (3.75 lb) Antenna and process connection adapter The flange weight (316/316L) depends on the selected standard and sealing surface. Details -> TI00426F or in the relevant standard The heaviest version is indicated for the antenna weights Encapsulated antenna, PVDF, 40 mm (1.5 in) 0.60 kg (1.32 lb) Drip-off antenna 50 mm (2 in) 1.70 kg (3.
Micropilot FMR66B HART Materials in contact with the medium Encapsulated antenna, PVDF, 40 mm (1.5 in) 3 4 5 2 1 A0046602 29 1 2 3 4 5 Material; encapsulated antenna, PVDF, 40 mm (1.5 in) Antenna, PVDF Threaded process connection, PVDF Housing adapter, PBT-GF30 (dust ignition-proof: 304/ 1.
Micropilot FMR66B HART Operability Operating concept Operator-oriented menu structure for user-specific tasks • Guidance • Diagnostics • Application • System Fast and safe commissioning • Interactive wizard with graphical user interface for guided commissioning in FieldCare, DeviceCare or DTM, AMS and PDM-based third-party tools or SmartBlue • Menu guidance with short explanations of the individual parameter functions • Standardized operation at the device and in the operating tools Integrated HistoROM da
Micropilot FMR66B HART Local operation Operating keys and DIP switches on the HART electronic insert off on 1 2 off on Display 4 3 A0046129 31 1 1+2 2 3 4 Operating keys and DIP switches on the HART electronic insert Operating key for reset password (for Bluetooth login and Maintenance user role) Operating keys for device reset (as-delivered state) Operating key II (only for factory reset) DIP switch for alarm current DIP switch for locking and unlocking the device The setting of the DIP swit
Micropilot FMR66B HART System integration HART Version 7 Supported operating tools Smartphone or tablet with Endress+Hauser SmartBlue app, DeviceCare from version 1.07.05, FieldCare, DTM, AMS and PDM HistoROM data management When replacing the electronic insert, the stored data is transferred by reconnecting the HistoROM. The device serial number is saved in the HistoROM. The electronics serial number is saved in the electronics.
Micropilot FMR66B HART If a pressure instrument does not have a pressure-bearing housing (no identifiable pressure chamber of its own), there is no pressure accessory present within the meaning of the Directive. EN 302729 radio standard The devices comply with the LPR (Level Probing Radar) radio standard EN 302729. The devices are approved for unrestricted use inside and outside closed containers in countries of the EU and the EFTA.
Micropilot FMR66B HART EN 302372 radio standard The devices comply with the TLPR (Tanks Level Probing Radar) radio standard EN 302372 and are permitted for use in closed vessels. Points a to f in Annex E of EN 302372 must be observed for the installation. FCC This device complies with Part 15 of the FCC rules.
Micropilot FMR66B HART • NAMUR NE 107 Status categorization in accordance with NE 107 • NAMUR NE 131 Requirements for field devices for standard applications • IEC 61508 Functional safety of safety-related electric/electronic/programmable electronic systems Ordering information Detailed ordering information is available from your nearest sales organization www.addresses.endress.com or in the Product Configurator at www.endress.com: 1. Select the product using the filters and search field. 2.
Micropilot FMR66B HART Measuring range restrictions The following restrictions must be considered when selecting E and F: • Minimum distance between reference point R and 100% mark A ≥ antenna length + 200 mm (8 in) Minimum value: 400 mm (16 in) • Minimum span F ≥ 400 mm (16 in) • Maximum value for Empty calibration E ≤ 30 m (98 ft) • The linearity check is performed under reference operating conditions.
Micropilot FMR66B HART Application packages Heartbeat Technology The Heartbeat Technology application package offers diagnostic functionality through continuous self-monitoring, the transmission of additional measured variables to an external Condition Monitoring system and the in-situ verification of devices in the application. The application package can be ordered together with the device or can be activated subsequently with an activation code.
Micropilot FMR66B HART Areas of application • Measurement in liquids and solids • Reliable detection of buildup on the antenna Detailed description Special Documentation SD02953F Accessories Weather protection cover 316L The weather protection cover can be ordered together with the device via the "Accessory enclosed" product structure. It is used to protect against direct sunlight, precipitation and ice. Weather protection cover 316L is suitable for the dual compartment housing made of aluminum or 316L.
Micropilot FMR66B HART 122 (4.8) !115 (4.53) 140 (5.51) 32 (1.26) 165 (6.5) 140 (5.51) A0038280 34 Dimensions. Unit of measurement mm (in) Material Plastic Order number for accessories: 71438291 Adjustable flange seal The adjustable flange seal is used to align the sensor to the surface of the product. It can be ordered directly with the device via the product structure "Accessory enclosed" or individually via the specific order number.
Micropilot FMR66B HART 14 (0.55) 33 (1.3) ø115 (4.53) ø162 (6.38) 23.5 (0.93) 4° ±8° A0046696 Technical data • • • • • Material: EPDM Recommended screw size: M14 Recommended screw length: 100 mm (3.9 in) Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi) Process temperature:–40 to +80 °C (–40 to +176 °F) Ordering information • The flange seal can be ordered together with the device via the "Accessory enclosed" product structure.
Micropilot FMR66B HART Technical data • • • • • Material: EPDM Recommended screw size: M14 Recommended screw length: 100 mm (3.9 in) Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi) Process temperature:–40 to +80 °C (–40 to +176 °F) Ordering information • The flange seal can be ordered together with the device via the "Accessory enclosed" product structure. • Order number: 71249070 Seal, adjustable, ASME 4" The seal, adjustable, ASME 4" is compatible with flanges ASME 4" 150 lbs 14 (0.55) 23.5 (0.
Micropilot FMR66B HART Ordering information • The flange seal can be ordered together with the device via the "Accessory enclosed" product structure. • Order number: 71249073 Mounting bracket, adjustable The device can be mounted on a wall or ceiling with the mounting bracket. The device can be aligned with the product surface with the swivel function. The mounting bracket can be ordered together with the device via the product structure "Accessory enclosed".
Micropilot FMR66B HART and: • Encapsulated antenna, PVDF, 40 mm (1.5 in) • Drip-off antenna 50 mm (2 in), threaded process connection FMR6xB mounting device order number: 71523849 There is no conductive connection between the mounting bracket and the transmitter housing. The bracket should be included in local potential equalization to prevent any electrostatic charge. Fasten only to stable materials (e.g. metal, brick, concrete) with suitable fastening fixtures (provided by the customer).
Micropilot FMR66B HART C A D B E A0046692 A B C D E Plastic single compartment housing, remote display Aluminum single compartment housing, remote display Device side, plastic single compartment housing prepared for remote display Device side, aluminum single compartment housing prepared for remote display Device side, dual compartment housing, L-form, prepared for remote display Material of single compartment housing, remote display • Aluminum • Plastic Degree of protection: • IP68 / NEMA 6P • IP66
Micropilot FMR66B HART Fieldgate FXA42 Fieldgates enable communication between connected 4 to 20 mA, Modbus RS485 and Modbus TCP devices and SupplyCare Hosting or SupplyCare Enterprise. The signals are transmitted either via Ethernet TCP/IP, WLAN or mobile communications (UMTS). Advanced automation capabilities are available, such as an integrated Web-PLC, OpenVPN and other functions. For details, see "Technical Information" TI01297S and Operating Instructions BA01778S.
Micropilot FMR66B HART Document type Purpose and content of the document Description of Device Parameters (GP) Reference for your parameters The document provides a detailed explanation of each individual parameter. The description is aimed at those who work with the device over the entire life cycle and perform specific configurations. Safety Instructions (XA) Depending on the approval, safety instructions for electrical equipment in hazardous areas are also supplied with the device.
