© 2010 Encore Electronics, Inc. All rights reserved.COVER © 2013 Encore Electronics, Inc. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein. All trademarks and brand names are the properties of their respective holders.
TABLE OF CONTENTS CHAPTER 1: INTRODUCTION ........................................................................................ 2 1.1 FEATURES ............................................................................................................... 3 1.2 SYSTEM REQUIREMENTS .......................................................................................... 3 1.3 SPECIFICATIONS ...................................................................................................... 4 1.
Chapter 1: Introduction The ENXTV-X4 is an excellent solution in combining a computer and a TV system without the need for a screw driver or software driver. Enhance your computer to a home theater quality system adding an HDTV resolution receiver, just plug in cables and power adapter, and you will experience high resolution TV programs. The ENXTV-X4 provides high quality, high resolution of up to1920x1200.
1.1 Features Use of digital frequency multiple technology.
1.3 Specifications TV format NTSC M / NTSC N, PAL M / PAL N Output video mode: 4:3 (800x600, 1024x768, 1280x1024, 1600x1200) Output video mode: 16:10 Resolution (1440x900, 1680x1050, 1920x1200) Output video mode: 16:9 (1366x768, 1600x900, 1920x1080) TV input 75 Ohm impedance, F or PH type Video input RCA Video in, S-Video in Audio input RCA L/R, 3.5mm connector (for PC use) Audio output 3.
1.4 Package Contents ENXTV-X4 External TV Tuner HD II Remote control Power adapter VGA-In Loop Back cable (for PIP mode) 3.5 mm Stereo Audio cable User manual 5 www.encore-usa.
Chapter 2: Getting Started ENXTV-X4 cable connection is easy. The most typical cable connections are shown in the picture diagram below. Do not connect the power cable before you connect these cables. Note: If the speaker cable is connected to the computer’s sound card, the audio will not work. The audio speaker cable should be connected to the ENXTV-X4 Audio-Out port when you are watching the TV without turned on the computer. 6 www.encore-usa.
2.1 Rear Panel Connectors Insert the provided CD into the CD-ROM drive, and then follow the on-screen instructions below. CONNECTOR TYPE DESCRIPTION DC In 5mm, INT+, EXT- AC adapter, power in (5V, 1 A) VGA Out 15 pin D-Sub connector ENXTV-X4 main video output. Connects to CRT/LCD Monitor VGA In 8 pin Mini DIN connector VGA-In loop back cable. The other end of this cable connects to the PC’s VGA D-sub 15 pin connector. Audio In 3.5mm stereo connector Audio In connects to PC sound system.
2.3 Panel Controller Functions 1. Manual / Power: 2. Vol -: Left / Volume down 3. Vol +: Right / Volume up 4. CH -: Down / Channel down 5. CH +: Up / Channel up 6. Speaker 8 www.encore-usa.
Chapter 3: Using the ENXTV-X4 3.1 PC side VGA Resolution Setting ENXTV-X4 can be used independent of PC system for a full screen display. In addition to the full screen display, when it is connected in conjunction with the computer system, the PIP sub video window can also be displayed at the top of PC monitor screen to let the user watch TV while using the computer at the same time, or just enjoy full screen TV viewing.
5. Windows system will change the display mode to your setting and ask whether to use this display mode or not, please click on OK to confirm the setting. 10 www.encore-usa.
Chapter 4: Using the Remote Control The included infrared remote control allows you to operate ENXTV-X4 remotely, such as turning your TV on/off, changing channels, adjusting volume, etc. Aim the front of the remote control at the remote control receiver and press the control buttons as you would on the infrared receiver. 4.1 Installing Batteries Open the back cover of remote controller and put in two pieces of AAA batteries (alkaline battery recommended). 11 www.encore-usa.
4.2 Remote controller functions 1. Power / Standby 2. Video Source 3. Program number select 4. Single or Double digits channel 5. Return to the previous channel last viewed 6. Mute 7. Display ratio aspect 8. Channel + 9. Volume + 10. Volume 11. Channel 12. Manu / Enter 13. OSD back to previous page 14. PIP function 15. Multi-channel display 16. Display resolution switch 17. Channel Skip 18. Sleep timer 19. Auto Channel scanning 20. TV System setting 12 www.encore-usa.
4.3 How to use the Menu In this section the ENXTV-X4 Main Menu and its operations will be discussed here. TV mode must be in Full Screen Mode. Press the MENU button from the remote control to get to this screen. Use the CH+/CH- keys to move the cursor to the desired item (Left and Right). Use the VOL+/VOL- keys to move the highlights down to every sub menus and use CH+/CH- keys to select. Use the EXIT key returns to previous setting menu or exit from the main menu.
4.4 OSD Display MENU Settings PIC: PICTURE: BRIGHTNESS: Sets for screen brightness CONTRAST: Sets for screen contrast SATURATION: Sets for saturation HUE: Sets for Color Hue SHARPNESS: Sets for sharpness COL TEMPRATURE: set for color temperature PIP MODE SET: Picture in picture screen size SOUND VOLUME: To adjust audio Out volume MUTE: Audio out volume mute BALANCE: To adjust Audio Left or right track Out volume 14 www.encore-usa.
ADVANCED SETTING NOISE REDUCTION: 3 degrees adjust image noise reduction CHANNEL SURF: 4,9,16 video division of TV wall mode MONITOR TYPE: LCD TUNE CURRENT CH: Display current TV channel EXCHANGE CH: Change the current channels sequence list EXCHANGE SAVE: Save the adjusted channels sequence list SKIP: Skip/no skip current TV channel FINE-SCAN: Adjust current TV signal quality SCAN: Auto process of scanning TV signal SCAN MODE: manual process of scanning TV signal 15 www.encore-usa.
SYS VIDEO SYS: PAL system standard setting BLUE SCREEN: Background color is blue when no signal input VIDEO SOURCE: TV\AV\SV input video source selection RESOLUTION: Output image resolution selection SCALE: Switch to wide image resolution RESET: Comeback factory default setting OSD LANGUAGE: OSD menu language selection: English H POSITION: Adjust OSD Horizontal position V POSITION: Adjust OSD vertical position BACK COLOR: Change the OSD back color TRANSPARENCY: Adjust OSD background transparency OS
Chapter 5: Technical Support Please visit www.encore-usa.com for the latest product information and downloads. Appendix A: User’s Notice This manual is provided “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.