ENUTV-ADDT USB Hybrid DVB-T / Analog TV Tuner Adapter (USB 2.0 / 1.
ENUTV-ADDT Users Guide Notice No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of us.
ENUTV-ADDT Users Guide Contents: Chapter 1: Introduction ...................................................................................................................... 4 1.1 Package Contents ................................................................................................................. 4 1.2 System Requirements........................................................................................................... 4 Chapter 2: Getting Started ....................................
Chapter 1: Introduction 1.1 Package Contents z z z z z z z ENUTV-ADDT Setup Disc Quick Installation Guide USB cable Portable Antenna PAL to NTSC connector Remote control (batteries included) 1.2 System Requirements z z z z z z z z z IBM PC or compatible Intel Pentium 4 2.0GB MHz / or equivalent AMD Athlon™ CPU or better processor One available USB 2.0 port. Minimum of 256 MB of RAM or more Minimum of 100 MB hard disk space available 1024x768 graphics card, DirectX R 9.
Chapter 2: Getting Started 2.1 Connecting the ENUTV-ADDT To install the ENUTV-ADDT into your computer, follow the steps below: 1. Connect the TV antenna cable to the connector. NOTE: Do not insert the ENUTV-ADDT TV tuner to the PC USB Port at this time yet. 2.2 Device Driver Installation Place the Setup Disc that came with the ENUTV-ADDT in the CD-ROM drive, then follow the on-screen installation guide steps below. 1. Insert the Setup Disc CD into the CD-ROM drive.
4. Click “Install” button to continue. 5. Click “Finish” button to restart your PC. 6. Connect the ENUTV-ADDT TV Tuner to PC USB Port. 7. Connect the ENUTV-ADDT TV Tuner to the PC USB port, then the system will detect new driver “UAD TV Box”. 8.
2.3 Install the TotalMedia™ software. 1. From the installation menu screen click the “Setup Utility” button. 2. Click “Next” button to continue. 3. Click “Yes” button to continue.
4. Click “Next” button or choose setup folder for installation. 5. Click “Next” button. 6. Click “Finish” button to exit.
2.4 Setting up the TotalMedia™ software. 2.4.1 Setup to Analog TV System 1. Click the TotalMedia™ shortcut or click to select TotalMedia™ from the Start/Programs. 2. Use the remote control or mouse to select the “TV” function. 3. Click “Next” button to continue. 4. Select your region then click “Next” button again. 5. Select “Trident USB Capture” and click the “Next” button.
6. Select audio device and click “Next” button. 7. Find your TV service then select the TV signal and click “Next” button. (Your selection should be between Cable TV or Antenna TV only for your Analog TV viewing) 8. Click “Start” button to scan analog TV channels automatically. This will take some time. When Channels are detected you will see those channels in the Ch / Name field. 9. Click “Next” button when scanning is finished. 10. Click “Next” button to continue.
. Click “Finish” button. 12. Watch and enjoy your high quality digital TV. 2.4.2 Setting up the Digital (DVB-T) TV system 1. Use the remote control or mouse to select the “TV” function. 2. Click the “Next” button to continue. 3. Select your region then click the “Next” button again.
4. Select “Trident USB DTV Tuner” and click “Next” 5. Click “Start” button to scan digital TV channels automatically. The bar would indicate the time remaining and all the digital channels detected will be shown on the Cg. / Name fields. 6. Click “Next” when channel scan is finished 7. Since the Analog TV setting is done first, let the radio button to stay at the “No” selection. Click “Next” to continue. 8. Click “Finish” to finishe the installation 9.
Chapter 3: Using the TotalMedia™ 3.1 FLOATING TOOLBAR The floating toolbar appears for a few seconds whenever you move the mouse: The "Home" button (house icon) when clicked will take you to the program's startup screen. The arrow will take you to the previous screen. The toolbar at the bottom of the screen features standard audio/video playback controls (Play/Pause, Stop, Record,) plus Volume and Channel controls. Special controls for MPEG2 playback and only appear when necessary.
3.2 TV MODULE This section lets you view and edit the settings for TV recording. You may pause and rewind TV (while you’re watching) using both the remote control and the toolbar. Options include: z Full Screen - Displays the video over the entire program display area-typically the entire screen. You can click the Full Screen button to switch into full screen mode. Press "Esc" or double-click the mouse to go back to a normal window.
z Settings - View and edit the settings for the TV module. 3.3 EPG This section lets you view the channel program lists. If you are using a digital TV system, please select to access EPG or network EPG to view the program lists. While using analog TV system, the program will take you to the network EPG directly. Note: This option is only available if you are using an EPG service. The Internet EPG may not be available in all countries and the EPG on some digital services may not be supported. 3.
3.5 RECORDED TV This section displays your recorded TV shows. z z z z z z When you play back recorded TV, you can fast forward or rewind using either the controls on your remote control, keyboard, or on the floating toolbar. You can click the button next to the preview window to play it in Full Screen mode. Press "Esc" to exit Full Screen. From the View section, you can choose either "Detail" or "Thumbnail" view.
z z z z z Check the video files you want to burn to a disc. Click again to deselect (uncheck) a video file. To trim a video clip, or to choose the frame be used as the chapter button thumbnail, click the scissors icon to the right of the file name. Click the disc settings button, to select the proper disc drive, change video format and modify other disc options. Click the DVD Menu Design button to personalize your DVD disc with a custom title and graphics. When you’re ready to make a disc, click "Burn.
z History - Display a history of your recorded TV shows. z The selected recorded program can be shown in the preview area. z Click the Delete (trash can) icon to delete a file. z Click the "Clear All" button to discard all the files. The "Frequency" option enables you to filter shows by how often they are recorded (once, daily, and weekly).If conflicting recording sessions are scheduled, you will be presented with a summary of the conflicts and asked to update the schedule.
Note: For detailed information and operations of the TotalMedia™ software, please check the TotalMedia™ User’s Manual included in installation CD. Chapter 4: Using the Remote Control 4.1 Installing Batteries Please draw out the plastic from remote control. 4.2 Remote controller functions 1. ON/OFF: Open/Close TotalMedia program. 2. Back: Cancel the setting 3. Mute: click to mute the audio 4. OK: Enter the set 5. Vol+/Vol-: click to enlarge/reduce volume. 6. Ch+/Ch-: click to switch previous/next channel.
07/06/28 Version 0.