ENMVG USB Audio/Video Grabber User’s Guide
ENMVG - User’s Guide User’s Notice This manual is provided “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
ENMVG - User’s Guide Contents: Chapter 1: Introduction ...................................................................................................................... 1 1.1 Package Contents ................................................................................................................. 1 1.2 System Requirements........................................................................................................... 1 Chapter 2: Getting Started ......................................
Chapter 1: Introduction 1.1 Package Contents Upon receiving your ENMVG, please make sure the following items are included in the ENMVG package. ENMVG Device CD Quick Installation Guide USB cable 1.2 System Requirements Microsoft Windows® 7/XP/Windows VistaTM IBM® PC or compatible, with Intel® Pentium® 4 2.0GHz CPU or better Minimum 128MB memory and 100 MB hard disk space 1024x768 graphic card, DirectX® 9.0c or above compatible graphic card or higher One free USB2.0 port.
Chapter 2: Getting Started 2.1 Connect ENMVG To install the ENMVG into your computer, follow the steps below: 1. Connect the ENMVG to PC USB Hub. 2.2 Device Driver Installation Placed the CD disk that comes with the ENMVG in the CD-ROM drive, then follow the on-screen installation guide below. 1. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear. 2. Select the language 3. Click the “Setup Driver” button.
4. Select the Language and click “Next” to start installation. 5. Click “Next” button to continue. 6. Click “Next” button to continue.
. Installation wizard will automatically copy driver to PC system, and then click “Finish” button. 8. Click “Finish” button. 9. Click “OK” button to restart PC system.
10. Connect the ENMVG Device to PC USB Hub, then system will detect new driver “USB Video Grabber”. 11. To make sure the driver is properly installed and started, open the “Device Manager”. Please double-click the “Sound, video and game controller” 2.3 Install the Utility software. 1. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear. 2. Select the language 3. Click the “Setup Utility” button.
4. Select the Language and click “Next” to start installation. 5. Click “Next” button to continue. 6. Click “Yes” button to continue.
7. Click “Next” button or choose setup folder for installation. 8. Click “Finish” button to exit.
Chapter 3: Launch the Software 3.1 The ENMVG utility 1. Double click for full screen display 2. Browse Image 3. Snapshot 4. Record format 5. Record 6. Playback 7. Switch Video Source 8.Volume 1. Double click for full screen display 2. Browse Image: To open image folder (refer to “3.5 Browse Image” on page 12.) 3. Snapshot: Capture current video frame as BMP or JPG image 4. Record format: Video output format selection 5. Record: Record/Stop Record 6. Playback: Play recorded video (refer to “3.
Setup the video format Click “Record” button to start capturing video 3.3 Snapshot Image Click the “Setting” button to setup the image format The ENMVG supports BMP and JPEG image format. The default is JPEG.
3.4 Playback Video Click “Playback” button to select video file. Choose the video then click “open” button.
Play/Pause: Click to play the current video file, click again to pause, click once more to continue 16 Stop Play: Stop 17 Snapshot: Capture current video frame as BMP or JPG image Default saved file name is “snapshot time” and saved under C:\My Pictures. You also can open "Snap Setting" option in "Options" to set snapshot saving directory, image format, and select rename file. 18 Play List: Show/Hide the Play List Window.
3.
April 29, 2010 13