Personal Video Recorder ENLTV / ENLTV-FM (PCI TV Capture Card) ENLTV Series User’s Guide Version 2.
ENLTV User’s Guide - User’s Notice No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of us.
ENLTV User’s Guide - Contents: Chapter 1: Introduction ...................................................................................................................... 4 1.1 - Package Contents............................................................................................................... 4 1.2 - System Requirements ........................................................................................................ 4 Chapter 2: Getting Started .......................................
ENLTV User’s Guide - Chapter 1: Introduction 1.1 - Package Contents The following items are included in the ENLTV / ENLTV-FM package. z CD Setup Disc (includes Software Driver and Utility Software) z ENLTV or ENLTV-FM PCI Card z Video Cable z Audio Cable z Remote Controller z FM Antenna (ENLTV-FM only) z User’s Guide 1.2 - System Requirements z z z z z z z z Intel® Pentium® 4 1.7GHz CPU or above Minimum 256 MB memory Minimum 1GB hard disk space available 1024x768 graphic card, DirectX® 9.
ENLTV User’s Guide - Chapter 2: Getting Started 2.1 - ENLTV / ENLTV-FM Hardware Installation Install the ENLTV / ENLTV-FM PCI Card to the computer’s available PCI slot according to your computers manual and new hardware installation procedures. Make sure that the computer’s power cord is unplugged before inserting the ENLTV / ENLTV-FM card to the PCI slot. ENLTV / ENLTV-FM supports PCI bus 2.1 and above.
ENLTV User’s Guide 2.2 - Device Driver Installation 1. Placed the CD software that comes with the ENLTV / ENLTV-FM in the CD-ROM drive. (Assuming that the ENLTV / ENLTV-FM PCI TV Tuner card is properly installed to the computer’s PCI slot), then follow the on-screen installation guide below. Device driver installation for Windows® XP Home/Professional Edition/x64 Edition 1.
ENLTV User’s Guide 3. Click “Next” on driver setup welcome window to continue. 4. Make sure the “Complete” radio button is selected then click “Next” 5. Click “Install” to begin install driver.
ENLTV User’s Guide 6. Click “Next” button. 7. Click “Continue Anyway” to continue the installation. 8.
ENLTV User’s Guide 9. Click “Finish” button 10. Click “Finish” to reboot PC. 11. To make sure the driver is properly installed and started, open the “Device Manager”. Please double-click the “Sound, video and game controller”.
ENLTV User’s Guide Device driver installation for Windows Vista™ 1. After ENLTV / ENLTV-FM hardware has been installed, the next time when the computer is powered-on, a message “Found New Hardware” dialogue box will appear on the screen. Click “Cancel” button to close “Found New Hardware” window. 2. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear. 3. Select the language 4. Click the “Setup Driver” button.
ENLTV User’s Guide 5. Click “Next” on driver setup welcome window to continue. 6. Make sure the “Complete” radio button is selected then click “Next” 7.
ENLTV User’s Guide 8. Click “Next” button 9. Click “Finish” button 10. Click “Finish” button.
ENLTV User’s Guide 11. To make sure the driver is properly installed and started, open the “Device Manager”. Please double-click the “Sound, video and game controller”.
ENLTV User’s Guide 2.3 - Install the DirectX® Microsoft DirectX® allows 3D hardware acceleration support in Windows® 98, 2000, Windows® XP/64 bit and Windows Vista™ 32bit/64bit. For software MPEG support in Windows 98, you must first install Microsoft DirectX®, and then an MPEG compliant video player. Follow the installation steps below to install MS DirectX®. 1. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear. 2. Select the language 3.
ENLTV User’s Guide 5. Click “Next” to confirm the installation of DirectX 6. Click “Finish” NOTE: The computer will automatically restart. Please save any unsaved files and close all programs before hitting the “Finish” button. 2.4 - Install the ENLTV Utility software. 1. Install TV application on Windows XP Home/Professional Edition 1. Insert the installation CD into the CD-ROM drive. The setup screen should automatically appear. 2. Click the “Setup Utility” 3.
ENLTV User’s Guide 4. Please read the License Agreement and click “Yes” button 5. Make sure the “Typical” radio button is selected then click “Next” 6. Click “Next” button to accept the default location or choose a different folder Note: We recommend not to change the default location 7. 16 Click “Next” button.
ENLTV User’s Guide 8. Click “Finish” button. NOTE: We recommend restarting your computer right after the Installation Wizard. 2. Install TV application on Windows Vista™ 32/64bit 1. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear. 2. Select the language 3. Click “Setup Utility” 4.
ENLTV User’s Guide 5. Please read the License Agreement and click “Yes” button 6. Make sure the “Typical” radio button is selected then click “Next” 7.
ENLTV User’s Guide 8. Click “Next” 9. Click “Finish” to restart your computer. NOTE: We recommend restarting your computer right after the Installation Wizard.
ENLTV User’s Guide - Chapter 3: Launch the ENLTV Program 3.1 - Running the ENLTV for the first time Click “Start”, move your mouse to “Programs\ENLTV\ENLTV” then click ENLTV NOTE: When the ENLTV Program is first started, it will prompt you to configure the Device Setting.
ENLTV User’s Guide 1. 2. 3. Select the video signal format in your area (NTSC or PAL) from the “TV Tuner Standard” drop-down menu. Select “Line-In” to drop-down menu of the “Audio Input Source” and the “Volume Control Source”. Click “Next” NOTE: • You must select same source for both “Audio Input Source” and “Volume Control Source”. • The name of your “Audio Input Source” may vary depending on your sound card. 4. This step will give you an option to scan for TV channels.
ENLTV User’s Guide 3.2 - Watch TV programs or movies from DVD/VCR/Camcorder 5.Double click to full screen 4.Channel Control 3.Volume Control 2.Search TV Channel 7.TV wall 1.Source Switch 6.Channel List 1. Source Switch: click it to select TV, Audio/Video or S-Video. 2. Search TV channel: click to search available TV channel. 3. Volume control: Adjust the Volume or mute. 4. Channel control: Set channel up or down. 5. Double click to full screen display or right click for the program menu. 6.
ENLTV User’s Guide - When you do a full screen display, you can use the panel bar to set up your TV box. 1. Fix Panel: To fix the display panel. Show / Hide as mouse drags. 2. Hide Panel: To hide the sub-panel. 3. Snapshot: Same as "Snapshot" button of main panel. 4. TV Wall: To launch TV Wall function, same as "TV Wall" button, 5. Start / Stop Record: Record the current playing audio/video, same as "Start/Stop Record" of main panel. 6.
ENLTV User’s Guide 3.4 - Snapshot Image 1. Click the “Setting” button to setup the image format. 2. The ENLTV supports BMP and JPEG image format. The default is JPEG. Please choose your desired format. 3. Click “Snapshot” button to capture image. 3.5 - Playback Video 1. Click “Playback” button to select video file. 2. Choose the video then click “open” button.
ENLTV User’s Guide Exit: To exit the video playback window, [Esc] or [ALT]+[F4] on keyboard equalized Minimize: To minimize the video playback window, click "MoviePlayer" in desktop taskbar to restore display Hide Control Panel: To hide video control panel, right click video window and select "Control Panel" to restore display Options: Click to open "Options" dialog and adjust settings for video window, snapshots, and playlist Browse Image: To open image folder (refer to “3.6 Browse Image” on page 26.
ENLTV User’s Guide 3.6 - Browse Images 1. Click the “Browse Image” to retrieve the saved pictures. 2. You can use the “Browse Image” software to control picture zoom in/out, or rename. The menu bar contains many function buttons for easy operations, these are: Refresh: To refresh the display snapshot image in current folder.
ENLTV User’s Guide 3.7 – Time-Shifting 1. Right click inside the ENLTV video window and select the “Timeshift” function. 2. Video is now being recorded to your hard disk while showing live on screen. You can click “pause” button or slide the “timer” to control the current TV show.
ENLTV User’s Guide 3. 28 Click “Stop” button on the control panel, or right click inside the ENLTV video window and select “Stop” from the context menu to stop the time-shift function.
ENLTV User’s Guide 3.8 - Using and setting up the FM Radio (This feature is for ENLTV-FM only) NOTE: ENLTV-FM is equipped with FM Radio receiver only. There is no AM Radio receiver included. 1. Click the “Switch Video Source” button then select “Radio Mode”. 2. Click the “Setup” button 3. If the list of radio channel is empty, click “Search” button to scan available radio program. 4.
ENLTV User’s Guide - Chapter 4: Using the Remote Control The Remote control allows you to operate the ENLTV program, such as turning the TV on or off, changing channel and volume, etc. Aim the upper front side of the Remote Control to the Remote Control Receiver as you would do on other infrared remote control. For default button assignments, please refer to the list below: Remote Control Default Settings: 1. Open or Close TV Program. 2. Mute 3. Number keys. 4. Single or Double digits channel. 5.
ENLTV User’s Guide - Chapter 5: Frequently Asked Questions Q：I can’t use ENLTV/ENLTV-FM when I run the software and it shows an error message. A：This problem is because of incorrect sound card device driver, or the driver and software did not match. 1. Incorrect sound card device driver • Check the Device Manager for any yellow or red markings under “Sound, Video and Game Controller”. If you see any yellow or red markings, your sound card may be bad or not working correctly.
ENLTV User’s Guide Q: How do I uninstall the ENLTV software? A: For Windows® XP, there are two ways to uninstall the ENLTV Utility software. 1. Go to Start > All Program > ENLTV > Uninstall ENLTV program. 2. Go to Windows “Control Panel” > “Add or Remove programs”. Select ENLTV then click “Remove” button Q：Why can’t I hear any sound while watching the TV? A：The audio cable might not be hooked up correctly.
ENLTV User’s Guide If the audio is still not working, check the sound card settings. See the User’s Guide, page 21, “Device Initial Setting” to set the “Audio Input Source”. Make sure all the appropriate audio levels are set about 3/4 high. Q： Why doesn’t the “Record” function work? I can watch a TV programs fine, but when I hit the “Record” button, nothing is saved to my hard disk drive. A：This can be a Windows account or user rights issue. 1.
ENLTV User’s Guide - Chapter 6: Technical Support For Technical Support or Installation Hotline contacts please visit our web site at http://www.encore-usa.com 2009/05/01 Version: 2.
