ENLTV-DVB-S DVB-S PCI TV Tuner (PCI Satellite TV Receiver Card / Recorder) ENLTV-DVB-S Series User’s Guide
ENLTV-DVB-S User’s Guide - User’s Notice This manual is provided “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
ENLTV-DVB-S User’s Guide - Contents: Chapter 1: Introduction ..................................................................................................................4 1.1 Package Contents .............................................................................................................4 1.2 System Requirements .......................................................................................................4 Chapter 2: Getting Started...............................................
ENLTV-DVB-S User’s Guide - Chapter 1: Introduction 1.1 Package Contents Upon receiving your ENLTV-DVB-S, please make sure the following items are included in the ENLTV-DVB-S package. CD of Installation Software ENLTV-DVB-S Card Audio Cable 4 in 1 Audio / Video cable Remote sensor cable Remote Controller User’s Guide or Quick Installation Guide 1.2 System Requirements IBM PC or compatible PCI 2.1 or 2.2 compliant interface Intel Pentium IV 2.
ENLTV-DVB-S User’s Guide - Chapter 2: Getting Started 2.1 Connect ENLTV-DVB-S Notes: Satellite cable has 12V power. At the first time installation, please make sure the PC system’s power cord has not been connected to the power jack even when the PC’s power is in shutdown state. Turn on the PC power ONLY after the ENLTV-DVB-S has been firmly and securely plugged into the PCI slot.
ENLTV-DVB-S User’s Guide 2.2 Device Driver Installation Place the CD-ROM that came with the ENLTV-DVB-S in the CD-ROM drive. (Assuming that the ENLTV-DVB-S PCI TV Tuner card is properly installed to the computer’s PCI slot), then follow the on-screen installation guide below. 2.2.1 Device driver installation for Windows XP 1. When the computer is powered on for the very first time during the setup, a message “Found New Hardware Wizard” dialogue box will appear on the screen.
ENLTV-DVB-S User’s Guide 4. Click “Install” button. 5. Click “Continue Anyway” to continue the installation. 6. Click “Continue Anyway” to continue the installation.
ENLTV-DVB-S User’s Guide 7. Click “Continue Anyway” to continue the installation. 8. Click “Continue Anyway” to continue the installation. 9. Click “Continue Anyway” to continue the installation.
ENLTV-DVB-S User’s Guide 10. Click “Continue Anyway” to continue the installation. 11. Click “Continue Anyway” to continue the installation. 12. Click “Continue Anyway” to continue the installation.
ENLTV-DVB-S User’s Guide 13. Click “Finish” button to complete the DVB-S card Hardware Installation Wizard. 2.2.2 Device driver installation for Windows Vista 1. When the computer is powered on for the very first time during the setup, a message “Found New Hardware Wizard” dialogue box will appear on the screen. Please click “Cancel” button or directly go to next step. 2. Click “Setup Driver” button.
ENLTV-DVB-S User’s Guide 3. Click “Next” button 4. Click “Install” button 5. Click “Install this driver software anyway” button 4 times. 6. Click “Finish” button to complete the DVB-S card Hardware Installation Wizard.
ENLTV-DVB-S User’s Guide 2.3 Install the ENLTV-DVB-S utility software. 1. Insert the installation CD-ROM into the CD-ROM drive. The setup will automatically appear. 2. Click “Setup Utility”. 3. Select the language and click “Next” button. 4.
ENLTV-DVB-S User’s Guide 5. Click “Next” button or choose different folder for installation. 6. Click “Install” button to start installing. 7. Click “Finish” to complete installation.
ENLTV-DVB-S User’s Guide - Chapter 3: Launch the Software 3.1 Running the ENLTV-DVB-S for the first time. Click “Start” on Windows Taskbar, and then select “All Programs” \ Encore \ ProgDVB At the first time running, please follow the setup steps as below. 1. Select the type of your card and click “Next” button. 2. You must add the switch and/or positioner into the DiSEqC tree (Main Menu -> Setting -> DiSEqC) and select your converter type (in LNB properties).
ENLTV-DVB-S User’s Guide 3. Then all satellites must be scanned in Main Menu -> Channel list -> Search channels -> … 4. That’s all. After that, you’ll see the channels list and be able to watch then. Usually, the free channels will be marked with green color, and those encrypted channels will be marked with the red color.
ENLTV-DVB-S User’s Guide 3.2 Record Video Click “Start” on Windows Taskbar, and then select “All Programs” \ Encore \ ProgDVB 1. Double click to full 2. Video Record 5. Playback Video 3. Video Source 6. Snapshot 7. Setting 4. Volume Control 8. Window Control 1. Double click to full screen display. 2. Video Record: to start record video 3. Source Switch: click it to select Video In or S-Video In. 4. Volume Control: Adjust volume 5. Playback video: to start playback recorded video file 6.
ENLTV-DVB-S User’s Guide - Chapter 4: Using the Remote Control The Remote controller allows you to operate the ENLTV-DVB-S remotely, such as turning your TV on/off, viewing the TV, and changing the channels and volume. Aim the front of the Remote Controller at the Remote Control Receiver and press the control buttons as you would on the infrared receiver. 4.1 Installing Batteries Open the back cover of remote controller and put in two pieces AAA batteries (alkaline battery recommended). 4.
ENLTV-DVB-S User’s Guide - Chapter 5: Supporting Center: For Technical Support, Installation Hotline or Contacts, please visit our web site at http://www.encore-usa.com .
ENLTV-DVB-S User’s Guide NOTES: _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ ________________________________________________
08/06/30 Version: 1.
