© 2010 Encore Electronics, Inc. All rights reserved.COVER © 2010 Encore Electronics, Inc. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein. All trademarks and brand names are the properties of their respective holders.
TABLE OF CONTENTS A— OVERVIEW....................................................................................... 2 A.1 PACKAGE CONTENTS ...................................................................... 2 A.2 SYSTEM REQUIREMENTS ................................................................. 2 B— HARDWARE INSTALLATION.......................................................... 2 C— SOFTWARE INSTALLATION ..........................................................
A — Overview Thank you for choosing Encore Electronics’ Wireless N300 Adapter (ENLWI-NX2). This pamphlet explains the essential steps to connect to your home or office wireless network. For more details and screenshots, please refer to the User Manual in the Installation CD. A.1 Package Contents Wireless N300 PCI Adapter x 1 Quick Installation Guide x 1 Installation CD (User Manual on CD) x 1 A.
C — Software Installation 1. 2. Click “Cancel,” if you see the ‘Found New Hardware Wizard’ window when you start Windows for the first time after installing the hardware. Insert the ‘Installation CD” to the CD-ROM drive. Depending on your computer’s configuration, one of the following 3 scenarios will happen (A , B or C). A. The ‘Encore Welcome Window’ appears automatically, and then, the window switches to the ‘Quick Setup’ window in Step 3. B.
4. Follow the on-screen instructions. Note: Click “Yes” to continue, if you see ‘Do you want to allow the following program to make changes to this computer?’ in the ‘User Account Control’ window in Windows 7 or Windows Vista. Click “Install this driver software anyway,” if you see ‘Windows can’t verify the publisher of this driver software’ in the ‘Windows Security’ window in Windows 7 or Windows Vista.
D — Using Windows Wireless Manager in Windows 7® and Windows Vista® 1. Windows 7 Tray Icon Left-click on the “Windows Wireless Manager Tray Icon” ( in Windows 7 and in Windows Vista). Windows Vista Tray Icon Note: If you cannot see the icon, click the “Show hidden icons ( 2. )” arrow in the system tray. Click “Connect to a network” (NOT “Network and Sharing center.”) Note: This step only applies to Windows Vista. 1. Select the “Wireless Network Connection” of your choice. 3. 2.
E — Using Encore Wireless Wizard in Windows XP® 1. 1. Right-click on the “Encore Wireless Manager Tray Icon ( 2. ).” 2. Select “Set Wizard.” 1. Check “Wireless Local Area Networks (Infrastructure).” 2. Click “Next,” in the ‘Select Operation Mode’ window. 3. 1. Select the ‘SSID’ (wireless network name) you want to connect to. 2. Click “Next,” in the ‘Select The Infrastructure Connection List’ window. 4.
–– * Local tech-support numbers are provided in selected countries. Service may change without prior notice. Please visit www.encore-usa.com for more details. 7 Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein. www.encore-usa.com All trademarks and brand names are the properties of their respective holders.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.