FCC INFORMATION The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Package Contain The package should contain following items: 1.The wireless LAN ISA card assembly 2.The Antenna assembly 3.The driver disk 4.This Manual.
Installation Step, Tum all the power of PC and its peripheral ‘Off’, Remove the cover of the PC. Step, Insert the ISA card into one of the ISA slot that built-in the PC. Secure the card with the screw. Step, Attach the antenna. Do not over-tighten when connecting, Finger tight is sufficient. Step, Place the antenna seat on top of the monitor. The antenna seat does not contain any magnetic material, therefore will not in fluent the display function of the CRT monitor.
Step, Turn on the power of the PC, and boot-up with Win.
When the screen display as following, [ERE EER EER Ar Select Other Location Insert the Driver Disk ino floppy disk driver. Key in "A Winning’ then press ‘Enter’.
The Windows begin to load necessary files. Key in *WAXWING” then press ‘Enter’. After the install wizard vanished, the driver had successfully installed. Once the driver installed, the user can operate all network functions of wings.
Technical specification RF common Frequency: 2400-2483MHz Channel No.: 11 Modulation: BPSK/DQPSK Antenna type: Dipole Antenna gain: 0dB RF TX section Output power: DBMS Max RF RX section Sensitivity: < -DBMS SST section PN code length: 11 bit Barker code Chip rate: 11M/§ Symbol rate: 1M/S Date rate: 1M/S (BPS) or 2M/S (DESKTOP) BER: << IE-6 MAC layer Protocol: [EEE802.11D5.