HOM E THE ATER SPE A K ER S Model EF30 SE R I E S OW N ER’S M A N UA L
Introduction Congratulations on your purchase of EMP Tek speakers! Your speakers are the result of many years of research and development. This manual contains setup recommendations and specifications for the EF30, EF30C and EF30T speakers. It is highly recommended you thoroughly read through the material contained in this manual before connecting your speakers.
Break In Period Allow several hours of listening time for your speakers to adequately break-in. During this period, the driver suspensions will loosen, the result will be an increase in bass, improved definition, and increased clarity and detail. Care and Cleaning To maintain the speaker’s high quality appearance, it is recommended you regularly use a dry or slightly-damp soft cloth to keep the exterior of your speakers free from dust, lint or dirt.
Attaching Speaker Wires When using a banana jack to attach speaker wires to the binding post terminals, insert the speaker wire into the banana jack. Next insert the banana jack into the binding posts. When using a banana jack to attach speaker wires to the binding post terminals, remove the black and red plastic protective inserts from the terminals. To do this, loosen the binding nut from the terminal by turning the nut counterclockwise until the nut is completely removed from the terminal.
System Setup In order to obtain the best possible sound from your speaker system, it is important to determine where the speakers will sound best in your listening room. Sound reflections from the floor, ceiling and side walls influence the balance, imaging and overall sonic quality at the listening position. Experiment with speaker placement to determine which location offers the best overall sound.
System Setup (continued) NOTE: There are several different surround formats available. Dolby Pro-Logic, Pro-Logic II, Dolby Digital and DTS generally have a 5 speaker plus subwoofer requirement. Dolby Digital EX and DTS ES add a center rear speaker. Please consult your audio/video professional to determine which system is best for you and how many speakers you will require.
Specifications Model EF30 EF30C EF30T Frequency Response: 60Hz – 20kHz ±3dB 60Hz – 20kHz ±3dB 45Hz – 20kHz ±3dB Sensitivity: 86dB (2.83V@1m) 89dB (2.83V@1m) 87dB (2.
Warranty Engineered Music Products “EMP Tek” warrants the EF30, EF30C and EF30T speakers (the "Product") to be free from original manufacturing defects in materials and workmanship for five (5) years from date of purchase from an authorized EMP Tek dealer. This warranty extends only to the original consumer purchaser. EMP Tek does not warrant goods used in industrial applications. This warranty does not cover any expenses incurred in any removal or re-installation of the product.