VSUB-1T VSUB-1R VSUB-1 Digital Wireless Subwoofer Audio System
Emotiva VSUB-1 The Emotiva VSUB-1 is used to connect from one to four subwoofers to the subwoofer output of a home theater receiver or processor. To use the VSUB-1 wireless subwoofer system, a VSUB-1T transmitter is connected to the subwoofer output on your processor or AVR, and a VSUB-1R receiver is connected to the input on each of your subwoofers.
VSUB-1 Transmitter and Receiverputer 1 2 3 PAIR LINE INPUT VSUB-1T POWER 1. Pairing Button (transmitter) - Press this button to pair your VSUB-1T transmitter to a VSUB-1R receiver (see Pairing). 2. Line Input (transmitter) - Connect this to the subwoofer output on your processor or AVR. 3. Power Input (transmitter) - Connect this to the AC adapter that came with your VSUB-1T. 4 5 6 PAIR LINE OUTPUT VSUB-1R POWER 4.
VSUB-1 Connections PROCESSOR or AVR SUBWOOFER OUTPUT TRANSMITTER AC PAIR LINE INPUT POWER VSUB-1T AC RECEIVER PAIR LINE OUTPUT INPUT SUBWOOFER POWER VSUB-1R
Setting Up The VSUB-1 Connections - Connect the Line Input on the VSUB-1T to the unbalanced subwoofer output on your processor or AVR. Connect the Line Output on the VSUB-1R to the unbalanced input on your subwoofer. (If your processor or subwoofer doesn’t have an unbalanced connection, you may use a passive balanced-to-unbalanced adapter with either.) Pairing - Before using the VSUB-1 system, you must pair your receiver with your transmitter.
FCC warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Emotiva Audio Corporation 135 Southeast Parkway Court Franklin, TN 37064 www.emotiva.