Remo Audio2 User Manual
Contents page Safety Warning……………………………………………………………3 Function and Operation……………………………………………………4 Frequently Asked Questions………………………………………………4 Specification………………………………………………………………5 Warranty……………………………………………………………………6 Installation ………………………………………………………………7 Serial Number……………………………………………………………2
Safety Warning ●Thank you for using our Remo Bluetooth sound furniture! ●Before using this unit please read the manual. ●We might improve our product due to technology update, and this user manual will be updated accordingly, we will not notice again. ●The apparatus shall be used in moderate climates only. ●Do not use in the humid or under water environment ●Do not place the apparatus in direct sunlight or heat, keep away from temperatures over 35° ●This apparatus shall be placed on stable state.
Functions and Operation Number Icon Function 1 To turn on/off the unit ; to play/stop 2 To decrease the volume. 3 To increase the volume. 4 Touch to takes you back to the previous track or hold to fast rewind through the current track. Touch to take you to the next track, or hold to fast forward through the current track. This USB port can charge your device with the USB cable, can not support the audio input function, output power is 1A 5 6 Basic operation 1.
Frequently Asked Qustions Problem Possible cause and correction or maintenance No power or does not turn on AC adapter isn't plugged into a working socket or not plugged into the power supply jack properly at the back of the unit. If the unit still can not work, please replace the unit. Or please open the unit and check if anything wrong on PCB. Or please check the power adapter working or not. No sound at all The volume switch is on minimum, the unit isn't set to the correct function.
Warranty » This limited warranty does not restrict your statutory rights in any way. » The warranty period is 1 year from the date of purchase. » You can certify your purchase date either by the original Invoice/Receipt, or by the registration code. » For Product Registration, please visit us at www.emomotech.com » Product serial Number is on page 2. » The warranty is limited to the repair of the faulty audio device.
Installation 1.Dig holes in the wooden board. ( shows on the following picture.) 2. Put the sponge on board. And dig the holes as the picture. 3. Cover by skin, and cut a incision by knife. 4. Dig the same holes on back board. 5. Take off the butterfly nut from control box and put the control box in the hole. 6. Install the butterfly nut back. 7. Finish Installation guide for speakers Decide the location of speakers 2. Dig the hole 3. Put speakers in the each hole. 4. Connect it 5. Put the nets on 6.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.