User's Manual

Table Of Contents
User Manual
E502
Please contact with your dealer if the issue still exist.
Trouble Shooting
How to Solve?
Passable Reason
User Manual
E502
LED
You can put the adjusting frame
into the pocket if you cell
phone is too small to pair with
our wireless charging pocket.
Four Function Buttons
You may have the special functions on those four
buttons. Press to trigger the function. It means no
function if you cant press down the button.
USB Charging Function
Use the correct cable to connect your mobile
phone with the USB output. The blue LED light will
turns on when charging.
LED
Safety Warning
Before using the unit please read the manual.
Keep this product away from any water, liquid or
wet areas.
Keep this product away from open ames such as
candles.
This item is ONLY to plugged into an AC
100V~240V Power outlet.
The unit should be powered o before unplugging
the product.
Do not place the product in direct sunlight or
heat. Keep away from temperatures over 35°C.
Never try to repair this product yourself, take it to
an authorized technician. Trying to remove
panels or repairing the unit yourself could result
in an electric shock.
Do not insert foreign objects into the product.
Adult Supervision is recommended if children are
using this product
Wireless Charging Function
Put your cell phone into the pocket and the
screen should face to the upwards. Then try to
adjust the cell phone position in the pocket till
you heard “beep. The blue indicator light will be
turn on now. This light means your cell phone is in
the charging.
Clean
There is a separate pocket
inside the wireless charging
pocket. You can take out and
wash it. Dont put it back
until it becomes dry. The wet
pocket may damage your
electronic products.
No function/
Nothing works
No power
Check the connecting
of the power plug.
Wireless
charging
function not
work or stable
The phone jacket
is too thick or
made by metal
Take o the jacket
and try again
Your phone does
not have wireless
charging function
Purchase the wireless
charging accessories for
your phone or using the
USB charging function.
Not at the correct
charging position
Adjust the position
USB unable
to charge
Your is not
charging by 5V
input
Please using the
specied power supply.
Appearance
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.

Summary of content (1 pages)