Service Manual

ManualsBrandsEmNet ManualsElectronicsWater Level sensing device

DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION

EmNet, LLC

121 S. Niles Ave., Suite 22,

South Bend, IN 46617

574.855.1012

www.emnet.net

DRAFT Updated Feb 2, 2021

CONFIDENTIAL – For Internal Use (Xylem and authorized partners only)

Field Service Manual

BLU-X Radar (Model B)

Field Service Manual

1 Table of Contents

2 Legal Statements ............................................................................................................ 2

2.1 FCC ........................................................................................................................... 2

2.2 Antenna care/ unauthorized modifications ................................................................ 3

2.3 Responsible Party ..................................................................................................... 3

2.4 Manufacturer ............................................................................................................. 3

3 Overview ......................................................................................................................... 4

3.1 Guideline ................................................................................................................... 4

4 Technical Specifications .................................................................................................. 4

4.1 Model ........................................................................................................................ 4

4.2 Sampling Rate ........................................................................................................... 4

4.3 Memory ..................................................................................................................... 4

4.4 Communication ......................................................................................................... 4

4.5 Battery ....................................................................................................................... 4

4.6 Performance.............................................................................................................. 4

5 Training and Qualifications .............................................................................................. 5

5.1 Requirements ............................................................................................................ 5

6 Related Documents ......................................................................................................... 5

7 Safety .............................................................................................................................. 5

7.1 Mitigating Risk when Servicing a Unit ....................................................................... 5

7.2 Battery Requirements ............................................................................................... 5

8 Tools and Consumables ................................................................................................. 5

Summary of content (13 pages)

PAGE 1
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION EmNet, LLC 121 S. Niles Ave., Suite 22, South Bend, IN 46617 574.855.1012 www.emnet.net DRAFT Updated Feb 2, 2021 CONFIDENTIAL – For Internal Use (Xylem and authorized partners only) Field Service Manual BLU-X Radar (Model B) Field Service Manual 1 Table of Contents 2 3 Legal Statements ............................................................................................................ 2 2.1 FCC ........................................................
PAGE 2
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION 9 Site Installation ................................................................................................................ 6 9.1 Site assessment ........................................................................................................ 6 9.2 Support hardware installation .................................................................................... 6 9.3 Radar mounting to support bar..............................................
PAGE 3
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION operation of the device. This device meets the FCC Radiofrequency Emission Guidelines and is certified with the FCC as: FCC ID: 2ATOZBXRB The FCC ID is located on the outside of the enclosure, closest to where the pulse generator and radiating antennas are located. The location of the label is as follows: The label is as follows: NOTE: This equipment may only be operated indoors. Operation outdoors is a violation of 47 U.S.C.
PAGE 4
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION (North America) CSI Electronics 1942 S. Elizabeth Street Kokomo, IN 46902 USA 3 Overview 3.1 Guideline This procedure and guide provides select instructions on how to service and install the BLUX Radar device. For more detailed instructions, please reach out to your Xylem representative. 4 Technical Specifications 4.1 Model Device Name: BLU-X Radar Model: B 4.2 Sampling Rate Rate 5 minutes (default), up to 1 hour 4.
PAGE 5
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION 5 Training and Qualifications 5.1 Requirements The skills required to complete this work are: • Knowledge of electrical wiring and safety • Minor hardware installation (bolts and nuts) 6 Related Documents Reference Letter Ref.A Ref.B 7 Part Number Description Battery_cable_illustrated_drawing. Diagram for battery cable connector pdf Chasqui_radar_connection_illustr Diagram for Telecom Board radar ated_drawing.
PAGE 6
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION bar service kit. Please refer to the support bar documentation for more information on installation and mounting of the support bar. 9 Site Installation Site installation starts with performing a site assessment, followed by installation of the support hardware and then mounting the radar to the support bar before proceeding to install the assembly into the manhole. 9.1 No. 9.
PAGE 7
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION 9.3 No. 9.4 Radar mounting to support bar Description Illustration Connect the radar support clamps to the support bar and mount the bar onto the bracket. Assembly installation Please refer to the support bar documentation (provided separately) for more information on installation of the support bar in the manhole and attachment to the support brackets. 10 Configuration 10.
PAGE 8
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION Normally maintenance of the unit involves the following few steps: 1. Removal of the radar and support bar assembly from the sewer 2. Inspection and removal of the tamper detection tag 3. Visual inspection of the external surface of the radar enclosure 4. Opening of the enclosure and inspection of the interior 5. Inspection and replacement of desiccant 6.
PAGE 9
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION 11.2 Visual inspection of the external surface of the radar enclosure: No. Description Illustration Inspect the exterior of the radar enclosure to identify any cracks or significant dents to the base or lid of the enclosure as well as the clasp and hinge. If the unit appears to have been damaged please request a replacement unit. 11.3 Opening of the enclosure and inspection of the interior: No.
PAGE 10
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION 11.4 Inspection and replacement of the desiccant: No. Description Illustration The desiccant is located in the compartment opposite of the battery connectors. Remove the old desiccant packs and inspect the color indicator on the packs to determine if the desiccant was consumed. Please estimate and record how much the desiccant was consumed. Replace with new packs of the same type. 11.
PAGE 11
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION Rotate the hinged telemetry assembly up to access the battery compartment. Take care to avoid contact with wires and electronics. Make sure to use all necessary safety equipment when accessing batteries. Inspect battery packs and battery cables for signs of damage such as corrosion, bloating, or discoloration. If any pack or cable appears to be damaged, do not attempt to service the unit.
PAGE 12
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION Inspect the battery packs to make sure that there are no signs of non-uniformity. Place three (3) battery packs upside-down into the battery compartments as shown, being careful to thread the wiring through the cable management channels. The indication that the battery pack is upside-down is that the cables for the pack will exit the pack at the bottom of the enclosure, not the top. Connect the battery packs in parallel using the integrated battery connectors.
PAGE 13
DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION service manager with the serial number of the radar in question in order to receive further support. 12.2 Returning a device for service If there is an issue which cannot be resolved or if the service technician has identified a hardware issue, please disconnect the batteries if it is safe to do so. Please request authorization to return the unit for replacement. You will receive instructions to safely prepare and return the unit.