READ AND SAVE THESE INSTRUCTIONS Ceiling Fan Light Fixture Owner’s Manual Model Numbers: LK70 & LK80 Includes: Three 13-Watt CFL Bulbs and F480WW Fitter Net Weight: 3.5 Lbs. UL ® Part No. F40BP74180000 Form No.
Safety Instructions WARNING: To avoid fire, shock, and serious personal injury, follow all instructions carefully. 1.Read your Owner's Manual carefully before installing the light fixture. Retain Owner's Manual for future reference. 2.Be careful of the fan and blades when cleaning, painting, or working near the fan.
8. Insert the black and white wires through the lockwasher and hex nut (supplied), firmly tighten the hex nut to secure the light kit fitter to the switch cup. Connect the white wire from the switch cup to the white wire of the light fitter (Figure 2). Connect the blue wire from the switch cup to the black wire of the light fitter. Use listed wire connectors (previously removed in Step 5) to make connections (Figures 2 and 3). 9. Carefully tuck all wires and splices into the switch cup. (Figure 2.) 10.
NOTE: The FN100 finial pack (sold separately) Installation on Emerson Fans Having Two-Piece Die-Cast Switch Housings comes with three options: no holes, one hole and two holes for pull chain options. 1. Remove all parts and parts packages from carton. 6. Depending on the model purchased, insert the fan speed control switch chain through the offset hole in the glass bowl or the hole in the bowl cap. 2. Remove the cover from switch housing below ceiling fan (Figure 6). 7.
. Install the female bracket to the ceiling outlet box using the two screws supplied with outlet box (Figure 13). Installation of the Optional Semi-Flush Ceiling Mount Kit 1. Feed the light fixture wires through the hex nut and then the threaded rod extension as shown in Figure 10. Secure the rod extension into the top of the light fixture by turning the rod clockwise, while holding the bottom hex nut with a wrench to secure. FEMALE BRACKET OUTLET BOX OUTLET BOX SCREW (2) 2.
! 9. Attach the canopy/light fixture assembly to the female bracket by first pushing threaded rod into center hole of the male bracket/outlet box assembly then tighten to ceiling mount kit by turning clockwise, tightening the threaded rod extension until secure (Figure 17). WARNING To avoid possible fire or electric shock, be careful not to pinch wires between light fitter assembly cover and the ceiling. 8. Carefully tuck all wires and splices into the outlet box.
LIMITED WARRANTY What The Warranty Covers: All products covered by this Owner’s Manual are warranted against all defects in workmanship and materials. You must be the original purchaser or user of the product to be covered. What The Period Of Coverage Is: All components are covered by this warranty for one year from the date you purchased your light fixture.
Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Part No. F40BP74180000 Printed in China 12/09 Form No.
