Bluetooth Speaker with Wireless Charger, Phone Rest that Extends and Rotates, USB Charger, FM Radio, Alarm Clock and 10 Watt Stereo ER-X300 Visit our website at www.emersonradio.
WARNING ■ 1) IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings. 2) – Do not use this apparatus near water. – Never remove the casing of this product. – Never lubricate any part of this product. 3) Clean only with dry cloth. 4) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
◼ BUILT-IN BATTERY CARE: • Please observe the following if the product contains a battery. • Your product is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. • The battery can be charged and discharged hundreds of times, but it will eventually wear out. • Unplug the charger from the electrical plug and the product when not in use.
Important Notes • Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates heat, places lacking ventilation, dusty areas, places subject to constant vibration and / or humid or moist areas. • Operation controls and switches as described in the manual.
Package Contents ER-X300 x 1 pc USB cable for charging x 1 pc Owner’s Manual x 1 pc DC5V/2.4A USB Adaptor x 1 pc Location of Controls and Indicators 1. Phone Rest Adjustable Arm 2. Wireless Charging Platform 3. Power On/Off button | Mode Select for Bluetooth/Radio/AUX 4. Answer Call | Play/Pause Key | FM Auto Search (AMS) | 12/24-Hour Format Select | Hour:Minutes Select button 5. Volume+/- | Tune Up / Tune Down button 6. Clock/Alarm Set | Dimmer button 7.
Charging the Unit 1. Connect the USB cable with one end (micro USB) plugged into the micro USB connector at the back of the unit, and the other end (standard USB) plugged into the output port of the DC5V/2.4A USB Adaptor provided. 2. For first time use, approximately 4 hours is required for a full charge. 3. A red indicator below the micro USB connector lights up while charging the unit and it changes to blue after fully charged.
Setting the Alarm 1. Press and hold the 2. Press the 3. Press the Hour. button to have the display “Flashes” Minutes (Clock Minutes). button again to enter into “Alarm Time Set” mode to have the display “Flashes” Alarm 4. Press the Tune Down 5. Press the Setting the Alarm NING button to have the display “Flashes” Hour (Clock Hour). or Tune Up button to move backward or forward to set Alarm Hour. button again to have the display “Flashes” Alarm Minutes. 6. Press the Tune Down Minutes. 7.
• Enable your Bluetooth device and select ER-X300 from its Available / Paired device list. If pairing successful, the unit will have quick 4-beat sound prompt out and indicator on front screen will then light up and become solid. • Automatic connection with your Bluetooth devices is possible if they have been paired successfully with this unit before. • After paired, you can play your music through this Bass Boosted Bluetooth Speaker.
Note: • Keep the unit away from other electronic devices to avoid radio interference. • For better FM reception, orient the USB cable and disconnect it from the charger. • Wireless charging can interfere FM reception. Please use wired USB charging port while listening to radio. Enjoying Audio Source via AUX IN Jack Press and hold the Power button three times to switch to AUX mode to turn the unit ON. Then press the Power button Plug a ∅3.
• When your smartphone is fully charged, the Blue LED will be Off and the Red LED will light up steadily. Note: • Work with Qi-compatible iPhone, Galaxy and all 5W Qi-enabled phones. • While wireless charging error occurred (if metal sheet/ substance placed on charging zone), the Red LED indicator at top of wireless charging platform will be flashing to alert user to get the erroneous receiver removed.
Hands Free Function Handsfree is functioning while Bluetooth successfully paired. • While call in, press the • Press the • Double click the button to answer call. button again to end call. button to redial the last number. Phone Rest Adjustable Arm Phone Rest Arm designed as an extendable and rotatable frame to enable adjustment for viewing angle.
Care and Maintenance Care Of Cabinets • If the cabinet becomes dusty, wipe it with a soft cloth. • If the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth. • Never allow water or any liquid to get inside the cabinet. • Never use any abrasive cleaners or cleaning pads as these will damage the finish of your product. Troubleshooting • UNIT DOESN’T RESPOND (NO POWER) Make sure unit is completely charged. Check that all connections are correct and properly plugged in.
LIMITED WARRANTY Emerson Radio Corp. warrants this product to be free from manufacturing defects in original material, including original parts, and workmanship under normal home use and conditions (“manufacturing defect”) for a period of ninety (90) days from date of original purchase in, and if used in the United States.
ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU. 10-90-1402A The serial number can be found on the bottom cabinet. We suggest that you record the serial number of your unit in the space below for future reference.