GO Wireless Logger User Manual Cargo Monitoring Solutions
Table of Contents 2 Introduction Page 3 Understanding the GO Wireless Logger Page 4 Operating Range Page 5 Activating GO Wireless Loggers Page 5 Logger Placement Scenarios Page 6 Regulatory Approvals Page 7 GO GreenSense™ Program Page 8 Lithium Battery Exemption Page 8 Technical Specifications Page 8 Technical Support Page 9
Introduction GO Wireless Loggers are flat, compact in size and digitally record the time and temperature of a perishable product’s environment during storage or in-transit. Easy to use in combination with the AutoSense™ Gateway, loggers do not require ongoing calibration to maintain accuracy. Loggers have the capability to measure ambient air temperature and are also equipped to take a surface read of the object to which they are attached, providing a more accurate assessment of actual product temperature.
Understanding the GO Wireless Logger 7. Logger Unique Identifier & Barcode 1. “This End Up” Arrows 6. Part Number 5. Duration 2. Temperature Range 3. LEDs/Visual Indicators 4. Start/Mark Button 1. “This End Up” Arrow - This arrow indicates the correct orientation of the label for optimal data transmission. 2. Temperature Range – Preprogrammed temperature alert ranges are displayed. If no alerts are programed “Data Logger” is listed. 3.
Operating Range Specified operating range for GO Wireless Loggers is -20°C to 60°C (-4°F to 140°F). Activating GO Wireless Loggers • Activate the logger by pressing and holding the green “Press & Hold” button in the lower righthand corner of the logger for 3 seconds; green and amber LEDs will flash in a sequence to indicate successful activation.
Logger Placement Scenarios The form factor of the GO Wireless Logger promotes its use in a variety of scenarios including at the pallet, carton and product level. Pallet Level - Many customers apply loggers to the side of a pallet. Emerson provides signage and clear plastic pouching to facilitate locating loggers on pallets at the receiving end as depicted in the photo to the right. Many customers place several GO Wireless Loggers on different pallets within a load to perform temperature mapping.
Regulatory Approvals Model: PSUWL01F; FCC ID WPEPAKS-1A; IC: 8031A-UW1A Model: UWL02G; FCC ID: WPEUWL02G; IC: 8031A-UWL02G This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
GO GreenSense™ Program GO Wireless Loggers can be easily recycled through the GO GreenSense program. GO GreenSense is a recycling program that facilitates the return of Emerson temperature monitoring loggers for proper battery and component recycling. Through the GO GreenSense program, Emerson provides customers with eco-friendly return boxes and pre-paid postage return labels free of charge.
Technical Support Technical Support is available 24 hours a day, 7 days a week. We’re with you every step of the way. Toll Free: +1-877-998-7299 Emerson.com/Cargo CargoSupport@Emerson.com Live Chat TQ.UM.Rev1.0319 Emerson is a trademark of Emerson Electric Co. or one of its affiliated companies. ©2019 Emerson Electric Co. All rights reserved.