3-axis stabilized handheld gimbal for smartphone V1.0 2019.
Table of Contents ■ Product overview ■ phone installation ■ Balance adjustment ■ Mounting tripod 2 3 ■ Button introduction 3 ■ Joystick control ■ Operating mode ■ Lamp description 4 5 5 ■ Fast standby 6 ■ Bluetooth function ■ Stabilizer calibration 6 7 ■ parameter 8 ■ Precautions 9 1 2
Product overview Tilt axis Balance adjustment knob Smartphone holder Roll axis Pan axis Type-c Charging port Signal light power button Hand grip Function buttons Browse Zoom wheel Joystick Video Take a photo Trigger button Included items Tripod Micro USB cable Wrist strap Box 1
phone installation Pull the clamp open into the phone and hold it close. Before the stabilizer is turned on, the clamp assembly is symmetric with the left and right sides of the mobile phone. Be sure to adjust your phone to balance, otherwise it will affect performance.
Mounting tripod When you need to place a tabletop video, turn the tripod clockwise into the 1/4 screw on the bottom of the handle to open the tripod. 1/4 inch Threaded interface Tripod fully open Button introduction 1 menu/return key In the APP interface, click to enter the parameter selection menu. In the parameter adjustment menu, the scroll wheel sets the parameters.
5 Lens switching Click to switch the camera front and rear lens 6 Mode switching (Signal color discrimination) red light( Boot default)-- - -- Panning mode Green light(Press 1 time) -- -lock mode Blue light(Press 2 time)---follow mode 7 Camera button Click: take a photo Double click: start recording / end recording 8 Zoom/view pulley Rolling pulley to adjust the lens zoom of the phone Press the album button, scroll the wheel to browse the album 9 power button on:open/under:turn off Joystick control
Operating mode Panning mode The pitch axis is controlled and the lens rotates in the direction of the handle rotation Lock mode The direction of the roll axis is unchanged, and the lens rotates following the direction of rotation of the handle follow mode The 3 axes are not controlled by the joystick, and the lens rotates following the direction of rotation of the handle Remarks:Rocker control is called lock Uncontrolled is to follow x x Panning mode Lock mode follow mode Lamp description Lamp sta
Fast standby Manually rotate the roll arm down to recover when the power is on And snap into the buckle, the stabilizer will automatically enter the standby state, heavy It is necessary to manually push the roll shaft out of the buckle in advance when starting up. Bluetooth function Control phone camera Stabilizer Power on state Need to exit the stabilizer APP Press and hold the phone Bluetooth again to enter the available devices. Click "stabilizer_B001" to connect successfully.
Stabilizer calibration Initialization calibration is required when the stabilizer is: After starting, the phone is not horizontally angled Use ambient temperature changes vary greatly Small angle adjustment in the horizontal direction at rest up 2 1 down First, put it on the plane, the phone is in balance The rocker goes down, then turns it on again, the joystick continues to hold After about 2 seconds down, click the camera button. The blue light flashes. Indicates that calibration is started.
product name Mobile phone stabilizer Max panning range 300° Max rolling range 240° Max tilting range 240° Cross arm adjustment distance 10mm battery capacity 2500*2m Ah ( L i- i on ) Charging voltage 5V Operating Voltage 7.4V Operating time 15H Operating temperature -10°C~45°C Adaption phone smart phone Weight 495g Precautions Please use the charger that meets the safety regulations to charge Falling or being hit by an external force may damage the machine. Be careful.
Warning and disclaimer Any illegal use by any user is prohibited and the user will be responsible for all actions to purchase and use the product. For this product, the company does not bear the risk of debugging and using the product by the end customer. And liability (including direct, indirect or third party damage). We will not provide any services for any products obtained from unusable channels or for unknown purposes.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.