MaaXBoard Mini Hardware User Manual V0.
MaaXBoard Mini HW UserManual V0.0 Copyright Statement: The MaaXBoard Mini single board computer and its related intellectual property are owned by Avnet Manufacturing Services. Avnet Manufacturing Services has the copyright of this document and reserves all rights. Any part of the document should not be modified, distributed or duplicated in any approach and form with the written permission issued by Avnet Manufacturing Services.
MaaXBoard Mini HW UserManual V0.0 Revision History Rev. Description Author Date V0.0 Initial version Hugo 20191030 http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Catalog Revision History ........................................................................................................................................ 3 Chapter 1 Product Overview................................................................................................................. 8 1.1 Brief Introduction .................................................................................................................. 8 1.2 System Block Diagram .
MaaXBoard Mini HW UserManual V0.0 2.2.10 Extend Interface J5 ..................................................................................................... 35 2.2.11 MIPI-DSI ..................................................................................................................... 36 2.3 Introduction of Peripheral Chips ......................................................................................... 39 2.3.1 AR8035 ............................................................
MaaXBoard Mini HW UserManual V0.0 Figure Figure 1.1 MaaXBoard Mini System Block Diagram .......................................................................... 8 Figure 1.2 MaaXBoard Mini Top View ............................................................................................... 11 Figure 1.3 MaaXBoard Mini Bottom View.......................................................................................... 11 Figure 1.4 Product Dimensions ...................................................
MaaXBoard Mini HW UserManual V0.0 Table Table 2.3 Ethernet Interface Pin Definition ....................................................................................... 20 Table 2.4 Camera Connector Pin Definition ..................................................................................... 23 Table 2.5 40 Pin Expansion Pin Header Definition ........................................................................... 26 Table 2.6 Antenna Connector Pin Definition ..................................
MaaXBoard Mini HW UserManual V0.0 Chapter 1 Product Overview 1.1 Brief Introduction MaaXBoard Miniis a development board for makers, designed by Avnet Manufacturing Services. The MaaXBoard Miniis a single board computer based on NXP IMX8MMini SOC series, which can be used for the areas such as medical instruments, video surveillance, communications, IOT, makers and so on.
MaaXBoard Mini HW UserManual V0.0 1.3 Packing List 1 ×MaaXBoard Mini 1 × Desiccant 1 × Anti-static Bag 1 × Safety Flyer 1 × Quick Start Guide 1 × Box 1.
MaaXBoard Mini HW UserManual V0.0 1.5 Other Customer Provide Parts To use the various functions of MaaXBoard Mini, customer should also provide the following parts which are not contained in MaaXBoard Mini Packages. 1 × USB to serial cable (TTL) 1 × 1Gbps Network Cable 1 × Camera Module 1 × MIPI-DSI Displayer 1 × 5V/3A Power Supply (USB Type C Interface) Other tools needed to implement related function http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 1.6 Interface Locations Figure 1.2MaaXBoard Mini Top View Figure 1.3MaaXBoard Mini Bottom View http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 1.7 Product Dimensions(mm) Figure 1.4Product Dimensions http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 1.8 Height Distribution (mm) Figure 1.5Height Distribution Note: There is tolerance in height due to mechanical treatment. http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Chapter 2 Introduction of Hardware System This chapter will introduce the structure, expansion and peripheral interfaces of MaaXBoard Mini hardware system in details. 2.1 MaaXBoard Mini Hardware Installation and Start up 2.1.1 Installation Before power up MaaXBoard Mini, you need to connect all necessary peripheral devices, then power on the board. 2.1.
MaaXBoard Mini HW UserManual V0.0 2.2 Details of Interfaces This section will introduce the constructions, principles, interface definitions and considerations of use of MaaXBoard Miniperipherals in detail, so that users may have a deep understanding of the hardware circuitry of the board. 2.2.1 POWER IN MaaXBoard Mini use a USB Type C interface as the +5V power in. Note that the USB Type C interface only provides power supply function, do not support data communication.
MaaXBoard Mini HW UserManual V0.0 2.2.2 Button There are 3 buttons on the MaaXBoard Mini, S3 as the system power button for the board, S1 and S2 as user button. Figure 2.2Button http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 2.2.3 USB Host MaaXBoard Mini provides twoDouble-layer USB Host connector (J2,J4), the USB portscan provide full speed USB2.0 data communication function, used to extend external devices in USB protocol. Figure 2.3 Double-layer USB Host connector http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Table 2.1 USB Pin Definition USB Connector(J2) Pin Signal Description 1 VBUS1 2 USB1_HOST_DN Ball Description Signal Type Down layer 5V Power A22 USB1 PHY USB2.0 differential signal pair negative Differential signal B22 USB1 PHY USB2.0 differential signal 3 USB1_HOST_DP 4 GND Down layer ground 5 VBUS Up layer 5V Power 6 USB_HOST_DN pair positive USB2.
MaaXBoard Mini HW UserManual V0.0 Table 2.2USB Pin Definition USB Connector(J4) Pin Signal Description 1 VBUS 2 USB_HOST_DN Ball Description Signal Type Down layer 5V Power USB2.0 host differential signal pair negative Differential signal USB2.0 host differential signal pair 3 USB_HOST_DP 4 GND Down layer ground 5 VBUS Up layer 5V Power 6 USB_HOST_DN positive USB2.0 host differential signal pair negative Differential signal 7 USB_HOST_DP 8 GND S1 Case Earth S2 Case Earth USB2.
MaaXBoard Mini HW UserManual V0.0 2.2.4 RJ-45 J8 is the physical interface of Gigabit Ethernet, the interface information is shown in the following picture: Figure 2.4RJ45 Connector Table 2.
MaaXBoard Mini HW UserManual V0.
MaaXBoard Mini HW UserManual V0.0 2.2.5 Camera J3 on the MaaXBoard Mini is a 15-pin FPC connector that supports MIPI 2Lane Camera input. The following picture shows the information of J3: Figure 2.5Camera Connector http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Table 2.
MaaXBoard Mini HW UserManual V0.0 Camera(J3) 14 I2C1_SDA 15 NVCC_3V3 F9 I2C1 data IO Power NC 16 No connection 17 NC No connection 18 NC No connection 19 NC No connection 20 NC No connection 21 NC No connection 22 NC No connection 23 NC No connection 24 NC No connection 25 NC No connection 26 NC No connection 27 NC No connection 28 NC No connection 29 NC No connection 30 NC No connection http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 2.2.6 40Pin Expansion Pin Header J1 on the MaaXBoard Mini is a 40 pin Extend Interface, used to support external devices. The following picture shows the information of the 40 Pins expansion connector J1: Figure 2.62.54mm Double Row Pin Header http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Figure 2.740Pin Pin Header Pin1 Position Table 2.3 40 Pin Expansion Pin Header Definition Expansion(J1) Pin Signal Description Ball Signal Type 1 NVCC_3V3 3.3V/500mA output Power 2 5V_IN 5V power supply input or output Power 3 I2C2_SDA General-purpose input/output IO 4 5V_IN 5V power supply input or output Power 5 I2C2_SCL General-purpose input/output IO 6 GND Ground Ground http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.
MaaXBoard Mini HW UserManual V0.
MaaXBoard Mini HW UserManual V0.0 2.2.7 Wi-Fi/Bluetooth (Optional) MaaXBoard Miniemploys a Wi-Fi/Bluetooth module to support Wi-Fi 2.4G/5GFrequency, and Bluetooth V4.2 standard. The Wi-Fi/Bluetooth antennas have two type: onboard ceramic antenna or IPEX antenna. IPEX antenna (customized version) IPEX antenna is empty welding in default, if the customer needs to use this interface, please contact the Avnet Manufacturing Services to customize. IPEX antenna connector’s specification as follows: Figure 2.
MaaXBoard Mini HW UserManual V0.0 Table 2.4 Antenna Connector Pin Definition Antenna(J10) Pin Signal Description Ball Signal Type 1 IN Data transmit Antenna 2 GND Ground 3 GND Onboard Ceramic Antenna (Default) Onboard Ceramic Antenna’s specification as follows: Figure 2.9 Onboard Ceramic Antenna http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 2.2.8 Micro SD Card (TF Card) Micro SD card(TF Card) is used to start the code, the program system curing storage, or provide external storage function. Figure 2.3 Micro SD Card Slot http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Table 2.5Micro SD Card Slot Pin Definition TF card connector(J9) Pin Signal Description Ball 1 SD1_ DATA2 T27 MMC Data bit2 2 SD1_ DATA3 T26 MMC Data bit3 3 SD1_CMD V27 MMC command 4 NVCC_3V3 5 SD1_CLK 6 GND 7 SD1_ DATA0 Y27 MMC Data bit0 8 SD1_ DATA1 Y26 MMC Data bit1 9 SD1_DETECT 10 SHELL 11 SHELL 12 SHELL 13 SHELL http://www.embest-tech.com V26 Signal Type IO 3.
MaaXBoard Mini HW UserManual V0.0 2.2.9 Extend Interface J6 J6on the MaaXBoard Mini is a 12 pin Wafer connector, used to support GPIO function. The following picture shows the information of the 12 pin Wafer connector J6: Figure 2.412Pin Wafer Connector http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Table 2.
MaaXBoard Mini HW UserManual V0.0 2.2.10 Extend Interface J5 J5 on the MaaXBoard Mini is a 12 pins Wafer connector, used to support GPIO function. The following picture shows the information of the 12 pins Wafer connector J5: Figure 2.5 12Pin Wafer Connector Table 2.7 J23 Pin Definition Expansion Interface1 (J5) Pin Signal Ball Description Signal Type 1 NVCC_3V3 3.
MaaXBoard Mini HW UserManual V0.0 Expansion Interface1 (J5) 10 SAI1_RXD6 AG19 SAI1 receive data bit6 11 SAI1_RXFS AG16 SAI1 receive L/R clock 12 SAI1_RXC AF16 SAI1 receive bit clock 2.2.11 MIPI-DSI J7 on the MaaXBoard Mini is a 30 pin FPC connector that supports MIPI-DSI high-definition and small size screen. The following picture shows the information of 30-pin FPC connector J7: Figure 2.630Pin FPC Connector (MIPI-DSI) http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Table 2.
MaaXBoard Mini HW UserManual V0.0 30Pin FPC Connector (J7) 24 NC No connection 25 NC No connection 26 GND Ground 27 NC No connection 28 VSYS 5V power output 29 VSYS 5V power output 30 VSYS 5V power output http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 2.3 Introduction of Peripheral Chips 2.3.1 AR8035 AR8035 Integrated 10/100/1000 Mbps Ethernet Transceiver. The AR8035 is a single port 10/100/1000 Mbps Tri-speed Ethernet PHY, which provides a low power, low BOM (Bill of Materials) cost solution for comprehensive applications including consumer, enterprise, carrier and home networks, etc. AR8035 supports IEEE 802.
MaaXBoard Mini HW UserManual V0.0 Chapter 3 Appendix 3.1 Software MaaXBoard Mini support Linux Yoctosystem and Android system, for the detail software introduction, please refer to related user manual. Linux MaaXBoard Mini Linux Software Release Note MaaXBoard Mini Linux Software User Manual MaaXBoard Mini Linux Software Development Guide Android MaaXBoard Mini Android Software Release Note MaaXBoard Mini Android Software User Manual MaaXBoard Mini Android Development Guide http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Chapter 4 Technical Support and Warranty 4.
MaaXBoard Mini HW UserManual V0.0 that are not provided or recognized by Avnet Manufacturing Services and the resulted damage in appearance or function; Product failures caused by the software or system installed by customers or inappropriate settings of software or computer viruses; Products purchased from unauthorized sales; Warranty (including verbal and written) that is not made by Avnet Manufacturing Services and not included in the scope of our warranty should be fulfilled by the party who committed.
MaaXBoard Mini HW UserManual V0.0 Chapter 5 Contact Information Tel: +86-755-33190846/33190847/33190848 E-mail: Technical support: support@embest-tech.com Sales contact: chinasales@embest-tech.com Fax: +86-755-25616057 Website: http://www.embest-tech.com/ Address: Tower B 4/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave.No.4093,Nanshan District, Shenzhen, Guangdong, China http://www.embest-tech.
MaaXBoard Mini HW UserManual V0.0 Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
MaaXBoard Mini HW UserManual V0.0 RF exposure statement: The transmitter must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. http://www.embest-tech.
