Embed AIO v5 User Manual Manual version: V1.
Copyright © 2014 by Embed International Notice of Rights All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Embed. For more information on getting permission for reprints and excerpts, contact Embed. Notice of Liability The information in this document is distributed on an “as is” basis, without warranty.
Contents 1 OVERVIEW .................................................................................................................................. 1 2 PRODUCT OVERVIEW: ............................................................................................................ 2 3 EMBED AIOV5 CLIENT/DEVICE GAME INSTALLATION ............................................... 3 4 USING THE AIOV5 ...........................................................................................................
1 Overview This document outlines the process of installation and setup for the Embed All-InOne V5 (AIOv5) hardware. Topics to be covered include Device installation,wiring details,and wireless settings. This guide assumes that the installer has basic electronic skills.
2 Product Overview: The All-In-One v5 (AIOv5) is a device that combines the functionality of a Controller v5, Swiper v5 and Embed Wireless all within the one shell. Once installed the AIOv5 is simplicity to use. All of the functionality is played behind the scenes and it only takes the swipe of a magnetic card to unleash the fun of a game or to collect your Etickets. The AIOv5 is supplied with a MW GS18B12-P1J AC/DC Plug pack which is used to power the Embed AIOv5. www.embedcard.
3 Embed AIOv5 Client/Device Game Installation Step 1: Connect the 13-way patch cable to the existing installed 13-way connector J1. Step 2: Connect the 7-way patch cable if this option is required. Step 3: Ensure the 12 V / 1A on J8 is present. Step 3: Configure the server. Note 1: Embed AIOv5 should not be installed in, nearby or on metal enclosures (such as a full metal cabinet), otherwise performance may be severely degraded.
4 Using the AIOv5 The AIO v5 is very simple to use. All functions for the customer are achieved by simply swiping a magnetic card in the slot located at the front of the device. The custome only needs to ensure that the edge of the card closest to the magnetic strip goes into the slot. It can be swiped in both directions and the card can be facing up or down. The functions available to the customer generally include: E-ticket collection. Start/Play game. Check card balance. www.embedcard.
5 FCC Part 15B Compliance Statement RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6 CE – Declaration of Conformity According to ISO/IEC Guide 22 and EN???? Manufacturer Name: Embed International Manufacturer’s Address: 2 Neil Street Osborne Park Western Australia, 6017 Declares that the product (s): Product Name: All-In-One v5 (AIOv5) Product Options: All Conforms to the following Product Specifications: EMC: Fulfills the essential requirements of the R&TTE directive 1999/5/EC as attested by conformity with the following harmonized standards: Health & Safety - ETSI EN 60950-1
7 Waste Electrical and Electronic Equipment (WEEE) Statement Embed complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE). This product has required the extraction and use of natural resources for its production. Itmay contain hazardous substances that could impact health and the environment, if not properly disposed.