Insert Card Reader Color Glo Service Mode User Manual Model: ICR-001 Manual version: V1.
Copyright © 2014 by Embed International Notice of Rights All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Embed. For more information on getting permission for reprints and excerpts, contact Embed. Notice of Liability The information in this document is distributed on an “as is” basis, without warranty.
Contents 1 LIST OF ACRONYMS ................................................................................................................ 3 2 SAFETY INFORMATION .......................................................................................................... 3 PROTECTING AGAINST ELECTROSTATIC DISCHARGE ............................................................................. 3 POWER SUPPLY DETAILS RANGE ......................................................................................
1 List of Acronyms Acronym Description ICR Insert Card Reader USB Universal Serial Bus Wi-Fi Wireless Fidelity / IEEE 802.11b Direct Sequence AC Alternating Current DC Direct Current 2 Safety Information This guide assumes that the installer is qualified to work on electrical devices, with electronic skills and experience working with arcade machines.
3 Product Overview: The ICR is a facing device that features a touchscreen display and is capable of accepting both traditional magnetic and contactless type cards. Guests insert their card and interact with the touchscreen for the primary purpose of transacting at games and attractions. The device can be mounted in portrait or landscape orientations to best suited the game and guest accessibility.
Recommended Installation Hardware The following is a recommended range of hardware to securely install and mount the ICR. The ICR uses 4mm brass inserts in the base of the enclosure so the appropriate length 4mm metric screws must be used to properly secure the ICR. All other hardware can be adjusted to what is most appropriate and available in your area. M4 metric, pan head, Philips drive, and zinc coated steel screws. Used to secure the ICR to the surface of the game or attraction.
4 Pre-Installation Before the installation of any hardware, verify the following: An adequate earth connection point exists in the game cabinet. If the mounting surface is metal, that it is adequately earthed.
5 ICR Installation The ICR is best mounted and fixed to a location on the game that ensures it’s easily accessible to guests. In many cases it’s recommended to mount the ICR over the existing coin entry point as it is readily accessible and allows use of the existing hole for cable entry. The ICR display can be adjusted to accommodate a horizontal (with left or right card entry) or vertical orientation. The default setting for the display orientation is vertical.
Template for the ICR mount point drill holes. NOT TO 1:1 SCALE This template is available in scale PDF format www.embedcard.
Network Interface The ICR interfaces to a network server in a number of ways and this will generally be determined by the client system. Via an IO Controller: At the top of the IOC is a USB port, this accepts an optional Ethernet Dongle for cabled connections or a Wi-Fi dongle for wireless 802.11N (Wireless support is pending). Configuration of the network devices is done through the ICR service menu. Via a Data-Port Controller If used with a Data-Port Controller, the interface is purely USB.
Network Configuration Configure the network settings by following these steps 1. Press and hold the service button on the harness connected to access the “Service Mode”. 2. Select the following buttons, Configure -> Network Settings 3. Using the touchscreen configure the settings as advised by your system administrator. NOTE: Support for Wi-Fi related setting such as SSID, Security is pending final development and release. www.embedcard.
6 CE – Declaration of Conformity According to ISO/IEC Guide 22 and EN???? Manufacturer Name: Embed International Manufacturer’s Address: 2 Neil Street Osborne Park Western Australia, 6017 Declares that the product (s): Product Name: Embed Insert Reader Product Options: All Conforms to the following Product Specifications: EMC: Fulfils the essential requirements of the R&TTE directive 1999/5/EC as attested by conformity with the following harmonized standards: Health & Safety - ETSI EN 60950-1 : 2
7 Waste Electrical and Electronic Equipment (WEEE) Statement Embed complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE). This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed.
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
