Installation Instructions

Table Of Contents

emax-usa.com

Radio

Battery

This is a 2.4 GHz radio, The radio is powered with 3×AA batteries.

Operation

Power

Power on and off by toggle the remote control switch button. The power indicator

light will turn red when on. The red light flashes quickly when the remote control

battery is low.

Binding

The radio comes already bound to interceptor. If binding is necessary follow these

steps:

1. Make sure the radio and the interceptor are powered off.

2. Power on the radio, the power indicator light will turn on. Press the bind button

after power on the radio. Then the radio enter bind mode. The red light will slow

flash after the radio enter in bind mode.

PAGE 1
Radio Battery This is a 2.4 GHz radio, The radio is powered with 3×AA batteries. Operation Power Power on and off by toggle the remote control switch button. The power indicator light will turn red when on. The red light flashes quickly when the remote control battery is low. Binding The radio comes already bound to interceptor. If binding is necessary follow these steps: 1. Make sure the radio and the interceptor are powered off. 2. Power on the radio, the power indicator light will turn on.
PAGE 2
3. Power on the interceptor, and ensure it is close to the radio, the red light on the radio will steady light when binding has been completed. 4. Repower the interceptor. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.