DVD DV-100 Instruction manual
INDEX SUBTITLE......................................................................................18 WARNINGS & IMPORTANT ......................................... i~ii DISC MENU...................................................................................19 PARENTAL ....................................................................................19 INDEX ................................................................................1 PASSWORD .................................................
WARNING & IMPORTANT WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. This symbol warns the user of un-insulated voltage within the unit that can cause dangerous electric shocks. This symbol alerts the user that there are important operating and maintenance instruction in the literature accompanying this unit.
IMPORTANT SAFEGUARDS AND PRECAUTIONS READ THE SAFETY AND OPERATING INSTRUCTION before operating your DVD-receiver. FOLLOW INSTRUCTIONS AND HEED ALL WARNINGS on your DVD player in this manual. 1. Save these instructions for later use. 2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Do not use this DVD-receiver near water. 4. Do not place this DVD-receiver on an unstable cart, stand or table.
FEATURES Compatible With DVD, Super VCD, VCD, CDDA, CVD, CD-DVD, Mini-DVD and MP3 Media Format. 10-Bit 27Mhz D/A Video Converter This DVD player’s 10-bit D/A converter is four times more accurate than conventional 8-bit converters. The result is artifact-free and crystal clear video image. This DVD player can play a variety of disc media including DVD Video, Video CD, CDDA, Super VCD, Auto NTSC and PAL Video Disc Conversion CVD, CD-DVD, Mini-DVD and MP3 media format.
PACKAGE CONTENTS Please verify that the following items are included within the DVD carton. If items are missing, please promptly return this unit to the retailer for an exchange.
PRECAUTIONS Please read the following carefully to get the best and safest performance from this DVD player Power Supply Condensation Make sure to use the correct power outlet as rated on the Condensation may result from moving the unit from a back of the DVD unit. (AC 100 – 240V) cold place to a hot place. Please turn the power on for 1 to 2 hours before using this unit if condensation occurs.
DISC CARE Disc Usage Disc Cleaning Please hold all discs by their edges or the center Fingerprints or dirt on disc surfaces can weaken the opening as shown below. Do not touch the shiny light reflected from the disc and directly influence the surface of the discs. signal quality. The poorer the signal quality, the poorer the playback performance. Keep the disc clean by wiping it straight out from the center with a dry soft cloth.
DISC COMPATIBILITY CHART This DVD player can play the following types of discs: Disc-Typ Format/Seite/Beschichtung DVD-Video Max. Wiedergabedauer (Speicherkapazität) DVD MPEG2-TYP 12 cm (5’’) /single sided/single layer 12 cm (5’’) /single sided/double layer 12 cm (5’’) /double sided/single layer 12 cm (5’’) /double sided/double layer 133 Min. (4,7 GB) 242 Min. (8,5 GB) 266 Min. (9,4 GB) 484 Min.
REMOTE CONTROL UNIT To use the remote control unit to operate the DVD player, insert two batteries (size AA) making sure that the + and – ends of the batteries are matched to the +/– marks printed inside the battery compartment. To use the remote controller, please point the remote control unit at the remote sensor on the DVD player. Notes: Do not use different types of batteries together, or mix old and new batteries. .
1. POWER Turns on/off the DVD player unit. 2. Digits 16. ZOOM Enters the zoom mode during playback. Used for direct selection of menu choices, audio tracks, and other inputs such as time and password. 3. 17. Used for navigation within a selection menu. ANGLE 18. If the DVD disc contains multiple view angles, this Used for navigation within a selection menu. button will change the viewing angle displayed by the DVD player. Refer to p.25. 4. 19.
FRONT PANEL/DISPLAY WINDOW Front Panel 1. 2. 3. 4. 1 2 STANDBY POWER 3 4 5 OPEN/CLOSE Standby Indicator Lights up in standby mode when the unit is turned off. POWER Switch Turns the unit’s power on and off. OPEN/CLOSE Button Opens or closes the disc tray. Disc Tray To place DVD, VCD, CD, and MP3 discs on. 5. 6. 7. 8. 6 7 8 STOP PLAY STILL/ PAUSE VFD Display Window Displays operation information. STOP Button Stops playback. PLAY Button Plays the inserted disc.
Display Window 1. Disc inside indicator 2. DTS® Digital Audio Indicator (See Fig. 1 below) 6. Identifies the inserted disc as a DVD disc. Indicates the disc played contains DTS® Digital audio 7. encoding. 3. 8. MP3 Indicator (See Fig. 7 below) Identifies the inserted disc as a MP3 disc. displays the title number currently in use or track 9. Analog Audio Output Indicator number (CD) currently playing. Indicates the audio sound output from analog audio SVCD/CD/VCD Indicator (See Fig.
REAR PANEL AND CONNECTIONS Video Output Terminals and Connections Composite Video Output Terminal Composite video output is the most commonly used video connection in use today and is supported by most televisions and A/V receivers. Composite video is set to display without user setup. S-Video Output Terminal You will want to use S-video output with televisions or monitors equipped with an S-video input whenever component video inputs are not available.
Audio Output Terminals and Connections 5.1ch Audio Output Terminals Down-Mixed Audio Output Terminals (L/R) Use down-mixed (stereo) audio output terminals for Use 5,1ch audio output terminals for connection ® connection with your television or other non-Dolby with your 5.1ch A/V receiver or amplifier. Digital A/V receivers or amplifiers. These terminals provide down-mixed Dolby® Digital audio signals for standard 2-channel playback.
INITIAL SETTING button on the remote controller to set up TV TYPE the initial setting. The On-Screen Display (OSD) will MULTI display below: The DVD player will choose the correct system to Press the SETUP display the playback of inserted disc. SETUP MENU - - MAIN PAGE NTSC The DVD player will output in NTSC format TV SETUP AUDIO SETUP DOLBY DIGITAL SETUP LPCM SETUP GENERAL SETUP PREFERENCES EXIT SETUP regardless of what format the disc was designed for.
DOWN MIX AUDIO SETUP (5.1Ch model) LT/RT There are eight available settings: Please connect to a built-in Dolby Pro Logic receiver AUDIO OUT or amplifier to enjoy the Dolby Pro-Logic surround You can choose to send the player’s audio signals to sound. an external receiver using the following outputs: STEREO ANALOG: Down mixed Stereo L/R audio output. Audio signals are sent using stereo (L/R) audio terminals. Selecting this choice will disable the digital audio outputs.
CENTER CNTR DELAY Set the CENTER output ON/OFF. Adjust the delay time of CENTER output. - - AUDIO SETUP PAGE - AUDIO OUT DOWN MIX CENTER REAR SUBWOOFER CNTR DELAY REAR DELAY TEST TONE - - AUDIO SETUP PAGE - AUDIO OUT DOWN MIX CENTER REAR SUBWOOFER CNTR DELAY REAR DELAY TEST TONE ON OFF SETUP CENTER SPEAKER - - 5MS 3MS 1MS OFF SET CENTER DELAY Note: REAR Please set the “CENTER” item to ON first. Set the REAR output ON/OFF. REAR DELAY Adjust the delay time of REAR output.
DOLBY DIGITAL SETUP NOTES: There are two available items: They are DUAL This function works only during playback of Dolby Digital MONO and “DYNAMIC”. recorded discs. DUAL MONO The level of Dynamic Range Reduction may differ depending on the DVD discs. There are four available modes: STEREO, L-MONO, R-MONO, and MIX-MONO.
LINEAR PCM SETUP GENERAL SETUP This option sets the audio output format sent using the There are four available selections: ANGLE MARK, unit’s coaxial digital audio output. OSD LANG, CAPTIONS, and SCR SAVER. Linear PCM OUT ANGLE MARK LPCM 48K During playback of a title with multiple angle sections, In the Linear PCM setting, “48K” means “the digital the message " audio output maximum sampling rate is 48KHz”; " will appear on the upper corner of the screen.
CAPTIONS PREFERENCES Closed Captions (CC) are a standardized method of Preferences allow you to set the default AUDIO, encoding text into an NTSC television signal. A TV can SUBTITLE, DISC MENU, PARENTAL, PASSWORD, and display the text with a built-in decoder. Closed Captions factory DEFAULTS of this player. This setting is only can be carried on DVD.
DISC MENU PASSWORD This unit supports five DISC MENU languages. The password is a 4-digit number. When you want to change the password, select “CHANGE” as shown below.
ON-SCREEN DISPLAY (OSD) DVD OSD Modes Audio CD / VCD OSD Modes There are two OSD display modes available when There are two OSD display modes available when playing playing a DVD disc. a VCD, and Audio CD disc. Mode 1 Mode 1 Shows the status of the pressed button and some Shows the status of the pressed button and some special special messages are displayed on the screen. For messages are displayed on the screen as previous example, when the OPEN/CLOSE button is pressed, the OSD description.
BASIC OPERATION OF PLAYBACK Preparation: If a television set is used, turn on its power and select the appropriate input AV, S-Video or SCART. If the SCART connection is used then the TV will switch to the correct input when the DVD player is turned on. If a sound system is used, turn on the amplifier first and make sure its outputs are set properly. PLAYING START Playback 1. 2. 3. VCD PBC MENU Turn on the DVD player.
FAST FORWARD/REVERSE SCAN SLOW-MOTION Playback Using the DVD Playback and FWD REV buttons to fast forward and reverse scan. When the DVD Playback playback changes in cycles of slow forward When the FWD or REV speed of playback changes in cycles of 2 8 Play 4 button is pressed, the 4 8 Fast Forward FF ENT/PLAY 4 8.
VCD/Audio CD Playback STOP Playback PBC ON (VCD 2.0 above only): DVD Playback Pressing the ■ / II Press button twice only pre-stop the playback. You must press the ■ / II button thrice to totally ■ / II button will go back to PBC (main page) Menu. PLAYING stop the playback. VCD PBC MENU Song 1 Song 2 Song 3 Song 4 Song 5 Song 6 Press the ■ / II button twice will Pre-stop playback.
ADVANCED OPERATION OF PLAYBACK REPEATED Playback TITLE MENU (DVD Only) TITLE/CHAPTER Repeat Some DVD discs have a title menu recorded within them to When the REPEAT use for selecting titles for play. This feature will only work button is pressed, the repeated with these discs. . playback is triggered and the OSD message is changed in cycles of “CHAPTER REPEAT ON”, DVD TITLE MENU “TITLE REPEAT ON”, and “REPEAT OFF.
MULTI-ANGLE Playback Some DVD discs may contain scenes with a number of Subtitle Off different angle views. Whenever a scene with multiple angle views is played, you can use the ANGLE button to English Subtitle SUBTITLE OFF SUBTITLE 01 / 02: ENGLISH view this scene from different angles. The OSD icon " " will appear on the screen during the playback of a scene with multi-angle views.
TITLE and CHAPTER search TITLE 01/35 CHAPTER 06/38 TIME search TIME _ _: _ _: _ _ NOTES: Audio CD playback’s background is start up logo. VCD PLAYBACK CONTROL (PBC) This function is only available for Video-CD version 2.0 or higher. The PBC operation may differ by disc, therefore, The “TITLE 01/35” indicates that the player is currently refer to the instructions for each disc. playing title no. 1 of 35 titles.
JPEG / MP3 - Files Working with JPEG Files Use numeric keys to designate the number of the picture, from which the photos showing go on in the PLAY MODE accordingly. Section 1: What is a JPEG? JPEG is short for the 'Joint Photographic Experts Group', a group of experts nominated to produce standards for CHANGE THE PLAY MODE PLAYING Press ► to enter the PLAY MODE selection and press ▼ or ▲ for selection of the play modes of REP-ONE,SINGLE, FOLDER, FOLDER REP, DISC SCAN, DISC, DISC REP, , in sequence.
ZOOM Press the numeral button directly from 0 to 9 and +10 to select the song what you want. EX: If you want to select #25 song, you have to press +10 button twice and then press 5 button. Direct select with navigation keys Under stop status, you can use arrow buttons for movement to select a title/song, then press ENT/ PLAY button to confirm. This features allows you to view a picture at the increments of 25%,50%,100%,150% and 200%. Press the ZOOM button.
ADDITIONAL INFORMATION GLOSSARY REGION MANAGEMENT INFORMATION ® DTS This DVD player is designed and manufactured to ® ® DTS stands for Digital Theater System. DTS Digital respond to the Region Management Information recorded Surround is an encoded/decoded system, which delivers on a DVD disc. If the region number described on the 5.1 channels of “master quality” 48KHz/20-bit audio DVD disc does not correspond to the region number of sound.
TROUBLE SHOOTING Before requesting service for this unit, please check the following chart for possible causes and remedies. If the remedies indicated in the chart below do not solve the problem, please consult your dealer for instructions. Common Symptom No power Possible Cause Remedy Power cord is not properly connected to the Make sure there is a connection between the power cord power outlet and the outlet.
SPECIFICATION Power requirement AC100-240 V, 50/60 Hz Power consumption <20 W (approx. 5W at standby mode) Weight 3.5Kg / 7.72 pound. Dimensions (W x D x H) 430x250x50 (mm) / 16.9 x 9.8 x 2.0 (Inch) Operating temperature range +5 °C to +40 °C / 41℉~ 104 ℉ Operating humidity range 5 % to 90 % (no condensation) Video system NTSC 525/60 Hz S-video terminal Y output level 1 Vp-p (75 Ω) C output level PAL / 0.
Eltax DVD DV-100 www.eltax.