Specifications
Model A4MGK4A PCBA manual
General
The Model A4MGK4A Network Interface Card (NIC) printed circuit board assembly (PCBA) contains a frequency
hopping spread spectrum radio operating in the 902.4-927.6 MHz ISM frequency band plus a LTE Cat-M1
radio. It connects to the Alpha 4 (A4) electricity metering platform. When the A4MGK4A module is installed in
an A4 meter it can be used as a “gatekeeper” for mesh radio enabled meters. Installations of multiple mesh
radio meters comprise part of an Advanced Metering Infrastructure (AMI) system that utilizes a proprietary
network architecture and protocol devised by Honeywell.
Device specifications
Table 1: 900MHz Radio Specifications for 25-Channel 250mW EA Operation
Classification
Frequency Hopping Spread Spectrum
Maximum Output Power
250mW
Operating Frequency Band
902.4 – 927.6MHz
Number of Channels
25
Channel Spacing
400kHz
Mode
EA LAN1
EA LAN2
Data Rate
35.56kbps
142.22kbps
Occupied Bandwidth – 20 dB
250kHz < BW < 400kHz
250kHz < BW < 400kHz
Occupied Bandwidth – 99%
250kHz < BW < 400kHz
250kHz < BW < 400kHz
Channel Dwell Time
< 0.4 seconds within a 10 second period
Table 2: 900MHz Radio Specifications for 50-Channel 0.63W SynergyNet Operation
Classification
Frequency Hopping Spread Spectrum
Maximum Output Power
0.63W (28dBm)
Operating Frequency Band
902.4 – 927.6MHz
Number of Channels
50
Channel Spacing
400kHz
Mode
SynergyNet
Data Rate
50, 150, 200kbps
FSK Occupied Bandwidth – 20 dB
100kHz < BW < 400kHz for 50/150/200kbps data rates
FSK Occupied Bandwidth – 99%
100kHz < BW < 400kHz for 50/150/200kbps data rates
Channel Dwell Time
< 0.4 seconds within a 20 second period for 50kbps data rate
< 0.4 seconds within a 10 second period for 150/200kbps data
rates
Formatted: Not Highlight