User's Manual

To be included in the full manual to be
generated by Cooper Crouse-Hinds
ATTENTION!
Incorrect termination of supply wires may cause internal damage and will void
warranty. To ensure your SmartSwitch module enjoys a long life, double
check ALL your connections with the user manual before turning the power
on.
CAUTION:
To comply with FCC RF Exposure requirements in section 1.1310 of the FCC
Rules, antennas used with this device must be installed to provide a separation
distance of at least 20 cm from all persons to satisfy RF exposure compliance.
Avoid:
• Operating the transmitter when someone is within 20 cm of the antenna
• Operating the transmitter unless all RF connectors are secure and any open
connectors are properly terminated
• Operating the equipment near electrical blasting caps or in an explosive
atmosphere
All equipment must be properly grounded for safe operations.
All equipment should be serviced only by a qualified technician
SAFETY Notice:
Exposure to RF energy is an important safety consideration. The FCC has
adopted a safety standard for human exposure to radio frequency
electromagnetic energy emitted by FCC regulated equipment as a result of its
actions in Docket 93-62 and OET Bulletin 65 Edition 97-01.