User's Manual

ManualsBrandsElpas Solutions ManualsElectronicsCURTAIN PIR DETECTOR

Elpas Curtain PIR Detector

P/N: 5-PIR00433

Installation Guide

www.elpas.com

Page 1 of 8

V3/April 2013

Introduction

This installation guide provides basic instructions for common Curtain PIR Detector installation scenarios.

CAUTION! It is important that you read, understand, and follow the instructions in this document. If you have questions, call your local

Elpas support representative.

Product Description

The Elpas Curtain PIR Detector is a battery operated; wireless curtain type PIR for protecting interior doors, walls, ceilings, windows

and skylights as well as glass displays in residential,commercial and light industrial environments designed for use in Elpas Safety,

Security and Visibility systems

The detector provides horizontal or vertical curtain-shape, passive–infrared perimeter coverage up to 6m x 1m (20ft x 3.5ft) and

additionally can also be used as an internal invisible barrier to detect movement between two adjoining areas.

The Curtain PIR Detector is engineered to continuously measure the ambient temperature of all objects within its field of view. Any

rapid or differential change in temperature triggers the detector to transmit identifiable coded alarm RF messages which can be used

to alert security personal of a possible intruder in the protected area.

To ensure maximum security reliability, the detector supports remote supervision to protect against unauthorized tampering,

unapproved removal or of a dead battery condition. Small in size and weight, Curtain PIR Detector is easily fastened to walls or

ceilings and delivers three years of dependable service between battery changes.

Coverage Patterns & Mounting Alternatives

Wall-Mount Curtain

2.4m

Ceiling-Mount Curtain

Overhead Curtain

This

side

Curtain / Pet Alley

OPTION A

OPTION B

DETECTION

CURTAIN

CLIP MCW on Internal Doorframe

Preliminary

Summary of content (8 pages)

PAGE 1
Elpas Curtain PIR Detector Installation Guide P/N: 5-PIR00433 Introduction This installation guide provides basic instructions for common Curtain PIR Detector installation scenarios. CAUTION! It is important that you read, understand, and follow the instructions in this document. If you have questions, call your local Elpas support representative.
PAGE 2
Elpas Curtain PIR Detector – Installation Guide Tamper Switch The PIR Detector contains two spring loaded tamper switch that when 3 VOLT LITHIUM BATTERY pressed, generates a ‘State’ message that is useful for registering the detector in the host Elpas RTLS application. RANGE SELECT JUMPER (Refer to the Eiris Configuration Guide for enrolling transmitter IDs.
PAGE 3
Elpas Curtain PIR Detector – Installation Guide Installation Guidelines Notes: )1After mounting, be sure that no gaps remain in the detector housing. For example, in the area around the screw holes. screwdriver.
PAGE 4
Elpas Curtain PIR Detector – Installation Guide ar y DRILL TWO 7 mm (1/4“) HOLES AT THE MARKED SPOTS NOTE: THE BRACKET PROVIDES TWO MOUNTING OPTIONS FOR OPTIMUM ANGLE COVERAGE .  USE THESE TWO HOLES TO INCREASE THE COVERAGE RANGE BY 5  USE THESE TWO HOLES TO INCREASE THE im ** Pr el * in COVERAGE RANGE BY 10 2 1 DRILL TWO HOLES IN THE MOUNTING SURFACE SECURE BRACKET WITH TWO SCREWS www.elpas.
PAGE 5
Elpas Curtain PIR Detector – Installation Guide 2 PLACE THE LOCKING PLATE OVER THE TWO PINS 1 3 SECURE THE LOCKING PLATE BY PRESSING DOWNWARD ar y LOCKING PLATE PLACE THE BASE SLOTS OVER THE TWO BRACKET PINS in Figure 12. Securing Locking Plate to Base 1 Pr el im POSITION THE PCB CORRECTLY IN THE BASE 2 INSERT SCREW TO SECURE COVER WITH BASE Figure 13. Mounting Cover to Base Note: The CLIP MCW can be mounted on either side of a window. Figure 14. Mounting on Both Sides of a Window www.
PAGE 6
Elpas Curtain PIR Detector – Installation Guide Setting the Coverage Range Short range approx. 2 m (6 ft) ar y A 4-pin jumper is used to select 3 ranges, according to the type of installation, for the curtain beams (see Figures 7 and 15). Medium range approx. 4 m (12 ft) Long range approx. 6 m (18 ft) Figure 15. Range Jumper Settings Medium Range Long Range in Short Range Figure 16.
PAGE 7
Elpas Curtain PIR Detector – Installation Guide EU Declaration of Conformity T h i s e q u i p me n t i s i n co mp l i a n ce wi t h t h e e ss e n t i a l r e q u i r e me n t s a n d o t h e r r e l e va n t p r o vi si o n s o f Di r e ct i v e 1 9 9 9 / 5 / EC I f t h i s e q u i p me n t d o e s ca u se h a r m f u l i n t e r f e r e n ce t o r a d i o o r t e l e vi si o n FCC & IC Compliance Standards T h i s d e vi ce ( F CC I D # : O 4 X5 - PI R0 0 4 3 3 a n d I C I D # : 1 4 6 7 G - 5 PI R 0 0
PAGE 8
Elpas Curtain PIR Detector – Installation Guide E l p a s r e s e r v e s t h e r i g h t t o m o d i f y t h i s st a t e m e n t a t a n y t i m e , i n i t s s o l e d i s c r e t i o n wi t h o u t n o t i c e t o a n y p u r c h a s e r o r u se r .