User's Guide Student Response System CRV-CK-1 Read this User's Guide carefully before using the CRA-1 and CRV-CK-1. Store this User's Guide in a safe place in case you need it again.
IMPORTANT SAFETY INSTRUCTIONS plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lighting storms or when unused for long periods of time.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. NOTICE: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Contents Before Use ...........................................................................................................................5 Main Functions ..................................................................................................................6 Supplied Items...................................................................................................................7 Part Names ..............................................................................................
Before Use Thank you very much for purchasing this product. Please read this manual carefully to make suitable use of the SRS. Also, please be sure to refer to any supplemental information included with this product. Caution Please note that screens and figures used in this manual may differ from the actual views.
Main Functions This product (SRS・・・Student Response System) is an educational tool that makes lessons using ELMO's tablet and clickers more enjoyable and easier to understand. The SRS has several key features for teaching more effective lessons.
Supplied Items The package of this product contains the following items. Contact your dealer if any of the following items are not included in the package you purchased.
Carrying case Seal clicker no.
Part Names Power button Turn the Tablet ON or OFF. Press the button for 3 seconds or more to turn OFF. When the power is ON, it is lit blue. When the battery level is low, it flashes. Tablet USB connector Connect to your computer when charging the Tablet. Status LED Indicate the status of wireless and battery level. Operating area Function keys Select the Tablet operations. See the corresponding sections for more details.
Power button Turn the Clicker ON or OFF. Press the button for 3 seconds or more to turn OFF. When the power is ON, it is lit blue. When the battery level is low, it flashes. Status LED Indicate the status of wireless and battery level. CRV-CK-1 Answer Buttons Select the answer. Preparations Inserting and Charging the Battery Pack Before use, insert the battery pack and check whether it is charged. ➊ Insert the battery pack in the tablet.
➋ Connect the computer and the tablet with the USB cable for charging. When charging starts, the "Status LED" in the center of the tablet is lit. When charging is complete, the "Status LED" turns off. Charging time: Approx. 4 hours Caution ・Disconnect the USB cable from the tablet when charging is complete. ・When using the Tablet, make sure that the USB cable is removed.
Inserting the Battery into the Pen Insert the dry cell battery in the pen before use. Dry cell AAA battery Caution ・Make sure that the polarity (+/-) of the dry cell battery is correct. ・Remove the dry cell battery if the pen will not be used for a long time. ・Do not recharge or short-circuit the dry cell battery. ・Use an AAA alkali dry cell battery. Do not use a rechargeable battery (such as Ni-Cd). ・The supplied dry cell battery is for an initial operation check. Its operating life is not guaranteed.
Installing the Tablet and SRS Software (Image Mate Accent) The Tablet and SRS software (Image Mate Accent) is used to perform operations such as the basic drawing operations and need to be installed before you use the Tablet and SRS. Install the Tablet and SRS software (Image Mate Accent) by following the procedure described below. The installation is required only one time for each computer when it is used with the Tablet and SRS for the first time.
When installation is complete, the "SRS DEMO" icon is displayed on the desktop. Depending on your computer, restart computer message may appear. Caution If the restart computer message is displayed, press the "Yes" button to restart the computer. When the computer restarts, the "Image Mate Accent" icon is displayed on the desktop. ④ ⑤ UnZip IMAccSRS_1.04.2335_release_diff.zip Drag and Drop the 3 files from “IMAccSRS_1.04.
Basic Tablet Operations This section describes the basic Tablet operations, and the operation names. Basic Pen Operations 1. Draw 2. Move the cursor Move while Move while holding touching the slightly away from tablet. the tablet. 3. Select a menu button Touch a menu button. ■Dragging (To draw or delete) Move the pen while touching the tablet. When or is selected, a line is drawn according to the pen movement.
The tablet's operating area corresponds to the entire screen. Basic Screen Configuration This section describes the basic configuration of the screen that is displayed when using the Tablet. Startup screen of the Tablet software (Image Mate Accent) ① Drawing area This area is for displaying the Document Camera image and drawing. The entire monitor is the drawing area. ② Status display area The current operation is indicated with an icon.
Connections This section shows an example of the connection of the Tablet with other devices. ■ Items to prepare Tablet, and supplied items ● Tablet(CRA-1) ● Clicker(CRV-CK-1) ● Wireless adapter(CRA-1R) ● RGB/USB composite cable ➊ Caution Items sold separately ● Computer ● Projector ● RGB cable Connect the devices as shown in the figure. For more details about the installation and the operation of the separately sold items such as a projector ,refer to the User's Guide of each device.
Using in a Lesson This section shows how to use the Tablet and Clicker in an actual lesson.
SRS Mode In SRS mode, you can answer the questions or vote by the clicker, You can display the result of Answer or vote. Operation ➊ Touch the function key ➋ Turn on the clicker. on the tablet. Note When a PC and the communication of the clicker establish it, the status LED of the clicker turns off, and the number of the current clickers is displayed by a PC.
■ Ask a question ➊ Display the question to a screen. ➋ Start the answer acceptance from a clicker. The question starts with button.
➌ Reply the answer with the button of the clicker. Select from 1 to 4 button and push. The button which was chosen light in orange. ➍ Stop the answer acceptance with The button light in green.
➎ Finish a question with button. The indication of a screen and the clicker is erased and can ask a new question. ■ Finish SRS mode ➊ Press the POWER button for 3 seconds or more to turn OFF. Note It is turned off the light power supply LED when cut off.
Tablet functions Button An answer receptionist start The end of an answer and the vote Clear 23
Clicker functions Answer and vote with the button Button Name Power Button Turn the Clicker ON or OFF. Press the button for 3 seconds or more to turn OFF. When the power is ON, it is lit blue. When the battery level is low, it flashes.
Various Settings This section describes how to configure the settings for Tablet operations.
This section describes the setting mode. Mode Function key Description Setting mode To configure the settings for Tablet operations. You can also display the version or status of connected devices. Quit Quit the Tablet software (Image Mate Accent). Setting Mode In setting mode, you can configure the settings for Tablet operations. Touch the function key on the tablet.
Tablet Status Display Version display Electric wave strength To display the version of the Tablet software (Image Mate Accent), the version of the Tablet, and the version of the wireless adapter. To display the electric wave strength of the Tablet and wireless adapter. When the electric wave strength is low, correct operation may not be possible. Battery level To display the battery level of the battery pack. When the battery level is low, charge it.
Setting the Pen ➊ Touch / to display the pen settings. Pen 1/pen 2 To select the pen that you want to configure . To select a type for the selected pen. Pencil Draw lines with the set thickness regardless of the pen pressure. Marker Draw lines with the set thickness regardless of the pen pressure. The colors are displayed semi-transparently. / / / Pencil/marker/fountain pen/ straight line pen Automatically converts a handwritten line into a straight line.
Other Functions This section describes various functions related to the Tablet. Replacing the Pen Tip When the pen tip becomes round, replace it with the supplied extra core. Use the supplied extra core replacement tweezers when replacing the pen tip. Caution When replacing the pen tip, be sure to replace it with an extra core that was supplied with the product. Make sure that children do not put small parts into their mouths.
About the LEDs of Tablet The power button LED and status LED on the tablet and the wireless settings button LED on the wireless adapter indicate the status of the devices. ■ Power LED LED status Operation Power is OFF. Off Press the power button to turn the power ON. Power is ON. Lit Press the power button for 3 seconds to turn the power OFF. Flashing The battery level of the battery pack is too low. Charge the battery.
Setting the Pen Writing Style ➊ Double-click the "Image Mate Accent Driver" icon that is displayed on the taskbar. Select "Settings and Test Drawing" in the menu. ➋ The Image Mate Accent Driver settings and test drawing screen is displayed. ① Menu ② Drawing settings ③ Drawing area To configure settings for drawings or perform operations. Use the eraser button to delete the entire drawing area. Use the color buttons to change the color of the pen.
⑦ Default To return "⑥ Applicable distance for direct line correction" and "⑦ Waiting time for direct line correction" to their initial values. To configure the pen pressure sensitivity on the tablet. The firmer you set this setting, the more pressure you will have to apply on the surface of the tablet to draw a line. ⑧ Pen touch sensitivity Configure this setting firmer if the cursor movements cause unintentional drawing or operations..
Wireless Communication Settings for the Tablet If the "Status LED" flashes and communication is not performed when you press the power button, use the "Wireless settings buttons" on the tablet underside and wireless adapter to perform the wireless settings. Turn ON the tablet's power, and press the "Wireless settings button" on the underside. ↓ The "Status LED" flashes at high speed. ↓ Press the "Wireless settings button" on the wireless adapter. ↓ The "Status LED" on the tablet turns off for a few seconds.
Troubleshooting If trouble occurs or you have any queries, first check this section. If the problem persists, check your warranty and contact the dealer where you purchased the product. Tablet power does not turn ON Is the battery pack inserted? Check that the battery pack is inserted correctly. Is the battery pack charged? Refer to "Inserting and Charging the Battery Pack" and then charge the battery.
Communication between the Tablet and wireless adapter is unstable If third-party Tablet software is running, it may conflict with the Is third-party Tablet software operations of this ELMO Tablet. installed? Do not operate third-party Tablet software while using this Tablet.
Cannot play the audio of a teaching material with the Tablet software (Image Mate Accent) The video types are lesson recording, normal recording, Is the video a lesson recording intermittent recording and frame recording. Of these, audio is recorded only with lesson recording. Audio is video? not recorded with the other video types.
Product Specifications Product Specifications ■ Tablet Model Name CRA-1 Operating Temperature 0 to 40 ºC Reading Range 8.0 x 5.0 inches (203.2 x 127.0 mm) Reading Resolution 0.0127 mm Reading Accuracy 0.42 mm Reading Speed 120 rps Pen Pressure Level 1024 level Wireless Band Used 2.4 GHz Communication Range Approx. 15 m (differs depending on the usage conditions) Power Supply Battery pack (lithium-ion battery) Continuous Operation Time Approx.
Weight 90 g (including two dry cells) 39
System Requirements The Tablet can be used in the following computer environments. Computer model IBM PC/AT compatible Operating system Microsoft Windows XP Home Edition / Professional SP2 (OS) Microsoft Windows Vista Home Basic / Home Premium / Business / Enterprise / Ultimate SP1 Microsoft Windows 7 Starter / Home Premium / Professional / Ultimate CPU Intel Core 2 Duo 2 GHz equivalent or higher Memory 2 GB or higher Video board Board compatible with Microsoft DirectX 9.
About the Separately Sold Accessories The following products are sold separately as accessories. (However, please understand that some products have a limited manufacturing cycle.) ・ Dedicated Tablet pen ・ Battery pack Tablet Pen for CRA-1 Battery Pack for CRA-1 Consult your local dealer about purchasing accessories. Usage Precautions ■ About electric waves used by the Tablet and Cliker The Tablet uses electric waves in the 2.4 GHz band.
■ About the use of this product This product can only be used in countries or regions where it complies with wireless regulations, such as laws related to electric waves. Contact your dealer before using this product outside the country or region of purchase. ■ About the battery pack The battery pack used in the Tablet is a rechargeable lithium-ion battery. As it can easily be affected by temperature and humidity, store the battery pack in a dry location between 15 and 25°C.
■ Cleaning When cleaning the Tablet, remove the connected cables and the battery pack, and perform in a location that is not subject to humidity or moisture. ・Remove any dirt from the Tablet with a soft, dry cloth. ・To remove stubborn dirt, dilute some detergent in water, dip a soft cloth in the water, and then wring it out before using it to wipe away the dirt. Do not use any volatile solvents such as thinner or benzene.
About the Warranty The warranty for this product is described below. ■ About the warranty certificate Your dealer will give you the warranty certificate. Be sure to check the details on the certificate, such as the dealer name and date of purchase. Read the contents of the warranty carefully and store it in a safe place. Warranty period: 1 year from purchase ■ To order a repair during the warranty period, contact the dealer where you purchased the product.
6X1CRVAC2 R0-Xdx 45