PSS User Guide PSS 3U PSS 6U November 2006
Important Notice This guide is delivered subject to the following conditions and restrictions: This guide contains proprietary information belonging to Elmo Motion Control Ltd. Such information is supplied solely for the purpose of assisting users of the PSS and PSSF series of power supplies. The text and graphics included in this manual are for the purpose of illustration and reference only. The specifications on which they are based are subject to change without notice.
Elmo PSS User Guide MAN-PSSUG (Ver. 3.01) Contents Chapter 1: Safety Information............................................................................................... 1-1 1.1 Warnings......................................................................................................................... 1-1 1.2 Cautions .......................................................................................................................... 1-2 1.3 Warranty Information ............................
Elmo PSS User Guide MAN-PSSUG (Ver. 3.01) Chapter 1: Safety Information In order to achieve the optimum, safe operation of the PSS power supply, it is imperative that you implement the safety procedures included in this user guide. This information is provided to protect you and to keep your work area safe when operating the PSS and accompanying equipment. Read this chapter carefully before you begin the installation process.
Elmo PSS User Guide Safety Information MAN-PSSUG (Ver. 3.01) 1.2 Cautions The PSS contains hot surfaces and electrically-charged components during operation. The maximum AC power supply connected to the instrument must comply with the parameters outlined in this guide. 1.3 Warranty Information The products covered in this manual are warranted to be free of defects in material and workmanship and conform to the specifications stated either within this document or in the product catalog description.
Elmo PSS User Guide 2-1 MAN-PSSUG (Ver. 3.01) Chapter 2: Product Description The PSS and PSSF power supplies were designed to complement Elmo servo amplifiers that do not include an integrated power supply. All PSS/PSSF models include shunt regulators and feature high capacitance, a low profile and snap-in capacitors. The PSSF supply requires fan cooling. The power supplies are built around two basic sizes: Eurocard (3U) and double Eurocard (6U).
Elmo PSS User Guide Product Description MAN-PSSUG (Ver. 3.01) Term. 32-pin Function Block connector 1 12 - 22 (J2) Power output return (PR) 2-2 Comment For DIN mounting, all six pins must be connected. 2 24 - 32 (J1) AC-1 supply input (through For DIN mounting, all five pins must an isolated/floating be connected. transformer) 3 14 - 22 (J1) AC-2 supply input (through For DIN mounting, all five pins must an isolated/floating be connected.
Elmo PSS User Guide Product Description MAN-PSSUG (Ver. 3.01) 2.3 Block Diagram Figure 2-1: PSS Block Diagram 2.4 Technical Specifications 2.4.
Elmo PSS User Guide Product Description MAN-PSSUG (Ver. 3.01) 2.5 Dimensional Drawings There are four basic sizes of the PSS/PSSF models: Panel mount PS1, for 3U/12T size Panel mount PS2, for 3U/21T size Panel mount PS3, for 6U/21T size Rack mount The following sections provide dimensions of the four basic sizes. All dimensions are given in millimeters.
Elmo PSS User Guide Product Description MAN-PSSUG (Ver. 3.01) 2.5.
Elmo PSS User Guide Product Description MAN-PSSUG (Ver. 3.01) 2.5.
Elmo PSS User Guide Product Description MAN-PSSUG (Ver. 3.01) 2.5.3 PS3 (for PSS-30/200 and PSSF-60/200*) * Model PSSF-60/200 includes an integrated fan. 16 Figure 2-8: PS3 - Top View 200 Figure 2-9: PS3 - Side View, Length 242.35 Figure 2-10: PS3 - Side View, Width 1 1 1 5 5 4 3 2 182 217.
Elmo PSS User Guide Product Description MAN-PSSUG (Ver. 3.01) 2.5.4 2-8 Rack Mount 4 x M3 60.76 43.84 1.6 7.64 15.64 162.54 Figure 2-11: PSS Rack Mount (3U/12T): Side View, Length 111.76 60.76 25.0 C 2A 32 1.6 7.64 8 128.7 Figure 2-12: PSS Rack Mount (3U/12T): Side View, Width Note: Rack Mount versions of other models are available upon request.
Elmo PSS User Guide 3-1 MAN-PSSUG (Ver. 3.01) Chapter 3: Installation 3.1 Unpacking the System Components To unpack the PSS: Carefully remove the power supply from the box and the Styrofoam. 1. Check the supply to ensure that there is no visible damage to the instrument. If any damage has occurred, report immediately to the carrier that delivered your product. 2.
Elmo PSS User Guide Installation MAN-PSSUG (Ver. 3.01) The AC power supply can be of any voltage in the range defined in the technical specifications (section 2.4). It must be able to deliver power to the amplifiers (including peak power), without significant drops. A three-phase supply is always recommended whenever possible, in order to provide better DC bus voltage stability (low voltage ripple) under high load conditions. The recommended AC voltage is: 1.2 x VAC (min) < VAC < 0.
Elmo PSS User Guide Installation MAN-PSSUG (Ver. 3.01) 3.2.3.2 Wiring Two or More Supplies in Parallel Fuse Fuse AC Fuse AC PSS AC TO AMPLIFIERS +Vs DC power common Heatsink AC AC PSS AC +Vs To additional DC power common PSS Heatsink TO ADDITIONAL POWER SUPPLIES Figure 3-2: Parallel PSS Wiring All wiring guidelines for supply connections described previously apply to multiple-PSS connections. 3.3 Startup Procedures 3.3.
Elmo PSS User Guide Installation MAN-PSSUG (Ver. 3.01) 3.3.2 Capacitor Reforming All PSS power supplies undergo capacitor reforming prior to shipment to the customer. However, if the power supply has been idle (at the customer site) for a period of nine months or more, the capacitors must be reformed before startup. To perform capacitor reforming: 1. Connect a 25-VAC supply at the AC input terminals and a 100-W/220-V (or 50W/110-VAC) light bulb at the power output terminals. 2.
