MP-350 INSTRUCTION MANUAL Network Operation Guide ENGLISH ■ Read this guide and the separate “IMPORTANT SAFEGUARD” carefully before using the projector. ■ This guide describes the configurations and operations using a wireless LAN (WiFi). ■ For the configurations and operations other than using a wireless LAN (WiFi), refer to the separate “INSTRUCTION MANUAL - MASTER OPERATION GUIDE”. ■ Keep this guide in a safe place for future reference. ©2012 Copyright ELMO Co., Ltd. All rights reserved.
IMPORTANT SAFEGUARDS This section provides warnings about the wireless LAN (WiFi). Also read the “IMPORTANT SAFEGUARDS” and “BEFORE YOU USE” in the separate “INSTRUCTION MANUAL - MASTER OPERATION GUIDE”. NOTES ON THE USE OF WIRELESS LAN(WiFi) ■ This product uses 2.4GHz radio waves. The wireless device in this product has been certified under the Radio Law.
TABLE OF CONTENTS IMPORTANT SAFEGUARDS..................................................................................... 2 NOTES ON THE USE OF WIRELESS LAN(WiFi) ................................................. 2 TABLE OF CONTENTS ............................................................................................. 3 1 BEFORE YOU USE ................................................................................................. 4 WiFi CONNECTION PROCEDURE ......................................
1 BEFORE YOU USE This guide contains the instructions on connecting the projector to iOS devices (iPhone/iPad) using WiFi (Wireless LAN) to project images from iOS devices wirelessly. Refer to the separate “INSTRUCTION MANUAL - MASTER OPERATION GUIDE” for the operations of the projector. ■ Benefit of the WiFi function You can project Office documents (Word, Excel, PowerPoint) or PDF files using the proprietary application software “BOXi Air” (a client software) installed in iOS devices.
WiFi CONNECTION PROCEDURE Install the application. “2 PREPARATIONS - INSTALLING BOXi Air” →P6 Upload a file to the application. “2 PREPARATIONS - UPLOADING A FILE TO BOXi Air” →P6 Configure the WiFi settings of the projector. “3 WiFi CONNECTION - SETTING UP THE PROJECTOR” →P9 Connect the iOS device to the projector using WiFi. “3 WiFi CONNECTION - SETTING UP iPad / iPhone” →P12 Start the projection using the application.
2 PREPARATIONS INSTALLING BOXi Air The proprietary application software “BOXi Air” can be downloaded from “App Store”. 1. Install “BOXi Air” from App Store to your iPhone or iPad. UPLOADING A FILE TO BOXi Air 1. Install iTunes to your computer. 2. Connect your iPhone or iPad to your computer. Use a proprietary cable for iPhone or iPad to connect it to your computer. 3. Start iTunes. ② ① ① From the left menu, click the device that you have connected to your computer. ② Click “Apps” in the top menu.
4. Scroll down the screen. 5. Click the icon “BOXi Air”. The files that are stored in the application will be displayed.
6. Select the file that you want to display. My document Save in ELMO File name Open Save as type Cancel ② Open as read only ① ① Click “Add”. ② Select the file that you want to display and click “Open”. The selected file will be saved in the application. Note ■ Also refer to the instruction manual for iPhone or iPad.
3 WiFi CONNECTION SETTING UP THE PROJECTOR 1. Press the button on the control panel or on the remote control to turn on the projector. control panel 2. Press the MENU button. Remote control Perform the following operations after the flashing wireless LAN indicator (blue) turns steady. 3. Select the “Input source select” icon . Select the “Input source select” icon in the “Main” menu with the buttons on the control panel or on the remote control. Then press the selection.
WiFi Menu The “WiFi” menu will be displayed. 5. Select “Connect WiFi Device”. WiFi standby screen Select “Connect WiFi Device” in the “WiFi” menu using the buttons on the control panel or on the remote control. Then press the button to execute the selection. The “WiFi standby” screen will be displayed. Leave the projector in this condition to connect iPad or iPhone. Note ■ In the “WiFi standby” screen, the “LOGIN CODE****(4-digit number)” will be displayed at the left top of the screen.
Note ■ Pressing the buttons on the control panel or on the remote control too fast may freeze the screen. If the screen is frozen, try to press the buttons slowly several times. ■ When changing the input source to “WiFi”, make sure that the wireless LAN indicator is on.
SETTING UP iPad / iPhone In this manual iPad is used to illustrate the procedure. The procedure is same for iPhone too. 1. Open “Settings”. Tap the “Settings” icon on the Home screen of your iPad or iPhone. 2. Open “Wi-Fi” and set it to “ON”. ② ① xxxxxxx ① Tap “Wi-Fi” to open the “Wi-Fi Networks” window. ② Set the “Wi-Fi” setting to “ON”. If the “Wi-Fi” setting is already set to “ON”, set it to “OFF”. Then set it to “ON” again. 3. Select in the field of “BOXi-xxxxxxx”.
4. Enter the IP address and the subnet mask. xxxxxxx ③ ① *** ② ① Click “Static”. ② Enter the following IP address and subnet mask. IP address 192. 168. 100. *** Subnet mask 255. 255. 255. 0 Note ■ The default IP address of the projector is “192.168.100.10”. If the projector has the default IP address, enter a number other than 10 to the field of xxx. (For example: 192.168.100.20) (Make sure to enter a different IP address from the projector’s one.
5. Select “BOXi-xxxxxxx”. Tap “BOXi-xxxxxxx” from the “Wi-Fi Networks” window. A mark will be displayed in front of “BOXi-xxxxxxx”. xxxxxxx xxxxxxx 6. Close “Settings”. The Home screen will be displayed. Note ■ Also refer to the instruction manual for iPhone or iPad. ■ If the Projector name (SSID) is changed from the “Settings” menu of the projector, the changed Projector name (SSID) will be displayed on the Home screen of iPhone or iPad.
4 WIRELESS PROJECTION WiFi 待機画面 Display the “WiFi standby” screen before establishing the WiFi connection between the projector and iPad or iPhone. Refer to “3 WiFi CONNECTION SETTING UP THE PROJECTOR”(Page 9) for details. 1. Tap the icon “BOXi Air” on the Home screen of iPad or iPhone. The following window will be displayed.
2. Tap “BOXi-xxxxxxx”. Note ■ If “BOXi-xxxxxxx”(SSID) is not displayed, tap “Search again” at the right top of the screen to search it. If it is still not displayed after the search, perform the setting procedure from the step “3 WiFi CONNECTION - SETTING UP iPad / iPhone” again. ■ When “BOXi-xxxxxxx” is tapped, the following “login” window will be displayed. xxxxxxx 3. Enter the login code. Tap “code” and enter the login code. Tap “Login”.
4. Select the file that you want to display. The files that are stored in “BOXi Air” will be displayed after the login process. Select the file that you want to display. The selected file will be displayed on the screen. ★ Operation procedures for BOXi Air File display screen Menu frame display screen 停止 戻る Tap Tap When the “File display” screen is tapped, the following menu will be displayed. Function Button Operation Move to the next page ― Flick from right to left.
Function Operation Enlarge Pinch out the “File display” screen. Shrink Pinch in the enlarged “File display” screen. Note ■ If the Projector name (SSID) is changed from the “Settings” menu of the projector, the changed Projector name (SSID) will be displayed on the Home screen of iPhone or iPad. Refer to “5 WiFi MENU OPERATION - NETWORK SETTINGS” (Page 20 ) for details.
5 WiFi MENU OPERATION SETTING UP THE WiFi MENU In this section, you will learn how to set up the “WiFi” menu for the network settings. Refer to “3 WiFi CONNECTION - SETTING UP THE PROJECTOR”(Page 9) for details about how to show the “WiFi” menu. 1. Select the menu. Select the menu using the control. buttons on the control panel or on the remote 2. Open the selected menu item. Press button on the control panel or on the remote control to open the selected menu item.
NETWORK SETTINGS 1. Select “Settings” from the “WiFi” menu. WiFi menu Select the menu item using the buttons on the control panel or on the remote control and press to display the “Network Settings” window as shown below. The following “Network Settings” window will be displayed.
Number ① ② Menu item Description To set the name of the projector. Projector name *Default SSID:BOXi-xxxxxxx (SSID) Refer to the below instruction for changing SSID. IP setting To set the IP address of the projector. Either “Use default IP”(default setting) or “Use other IP”(user setting) can be selected. ③ IP address To set the desired IP address for the projector. This field is enabled when “Use other IP” is selected. *Default IP address:192.168.100.
How to configure the “Network Settings” window 1. Select the item. Select the item that you want to configure using the buttons on the control panel or on the remote control. BOXi-xxxxxx x The selected item will be marked in orange. 2. Open the “Keyboard” window. Keyboard window Press button on the control panel or on the remote control to open the “Keyboard” window. (In case “IP setting” is selected, a ✔ mark will be displayed in the tick-box in front of the option.
3. Enter characters. A cursor that indicates the typing position will be displayed in the typing field. Select a character from the keyboard using the buttons on the control panel or on the remote control. The selected character will be marked in orange. Press button on the control panel or on the remote control to enter the selected character. Type of keys 0~9, a-z ― Description To enter alphabets or numbers on the keyboard. (0~9, a-z). ←、→ To move the position of the cursor.
Note ■ Press the “MENU” button on the operating panel or on the remote control to return to the “Network Setting” window without saving the entered characters. ■ If you enter a character that is not supported, a warning message will be displayed and you cannot save the entered character.
6 TROUBLESHOOTING This section describes troubleshooting related to the wireless LAN (WiFi). Also refer to the separate “INSTRUCTION MANUAL - MASTER OPERATION GUIDE”. The problems described in the following table may not be caused by malfunction of the projector. Check the following table before asking for repair. If the problem still remains after the troubleshooting, please contact your dealer for a check. Problem Cannot establish WiFi connection.
Problem WiFi connection is sometimes cut off. Check These Items Related Page ➡ There are other devices in the neighborhood that are using the same frequency as that of the projector. 【Remedy】Keep those devices away from the projector. →P2 ➡ There is other device in the neighborhood that is using the same IP address as that of the projector. →P20 【Remedy】Change the IP address. No image is projected. ➡ The projector is not in the “WiFi standby” mode. 【Remedy】Call the “WiFi standby” screen.
7 APPENDIX TRADEMARKS The following trademarks /registered trademarks are used in this guide. Is a registered trademark of ELMO Co., Ltd. DLP(Digital Light Processing) is a trademark of Texas Instruments. iPhone, iPad and iTunes are trademarks of Apple Inc. App Store is a service mark of Apple Inc. iOS is a trademark or registered trademark of Cisco Systems Inc., registered in the U.S. and other countries.
6-14, Meizen-cho, Mizuho-ku Nagoya, 467-8567, Japan OVERSEAS SUBSIDISRY COMPANIES ELMO USA CORP. ELMO Europe SAS Headquarters Headquarters 1478 Old Country Road Immeuble Elysées La Défense, Plainview, NY 11803, U.S.A. 7C, Place du Dôme, Tel. (516) 501-1400 Fax.(516) 501-0429 92056 Paris La Défense, France E-mail: elmo@elmousa.com Tel. 33 (0) 1 73 02 67 06 Web: http://www.elmousa.com Fax.