Maintenance Instructions
25
• Blink meanings:
• Green, Blue, or yellow blinking in a 1 blink continuous pattern indicates at least one of the
following:
• the monitor is moving
• valve is moving
• a button is being pushed on this panel mount.
• Magenta blinking indicates that the handheld and it’s associated monitor are in setup or
update mode.
• Red blinking indicates handheld is in pairing mode.
• Red-yellow = RF is paired, but not currently communicating to any other RF device.
• Wireless Handheld POWER LED
• If not on Docking Station
• Off = handheld is not powered
• SOLID GREEN = GOOD Battery level
• SOLID YELLOW = LOW Battery level
• FAST BLINK YELLOW = VERY LOW Battery level
• FAST BLINK RED = CRITICAL Battery level
• If on Docking Station
• Off = handheld off, not charging
• Solid BLUE = handheld off, but charging
• SOLID CYAN = handheld on, charging, GOOD Battery level
• SOLID WHITE = handheld on, charging, LOW Battery level
• FAST BLINK WHITE = handheld on, charging, VERY LOW Battery level
• FAST BLINK MAGENTA = handheld on, charging, CRITICAL Battery level
• SOLID GREEN = handheld on, not charging, GOOD Battery level
• SOLID YELLOW = handheld on, not charging, LOW Battery level
• FAST BLINK YELLOW = handheld on, not charging, VERY LOW Battery level
• FAST BLINK RED = handheld on, not charging, CRITICAL Battery level
• Wireless Handheld Specific LEDs (during pairing)
• OSC + EXT LED Blinking = clearing previous pairing
• STOW + DEPLOY (with power LED off)
• Lit solid = ready to pair RF
• Blinking = performing RF pairing operations, please wait
• Wireless Handheld STATUS LED
• Color meanings:
• Off = normal operation, monitor Wi-Fi is off, monitor and valve is not moving, and this
controllers buttons are not being pushed.
• Green = normal operation
• Blue = Monitor Wi-Fi is on, normal operation
• Yellow = a DTC error has occurred (Refer to the Troubleshooting section of this manual)
• Magenta = in setup or update mode.
• Red-yellow = RF is paired, but not currently communicating to any other RF device