Maintenance Instructions

Joystick Controller –

• Using the Joystick Controller template located at

www.elkhartbrass.com, drill all holes as shown

through the panel.

• Mount the Joystick Controller using 4 3/8” fasteners

secured with blue Loctite 242 or equivalent.

• Connect plug 2 to the appropriate CAN line.

• Supply power to the Joystick by connecting the red (+) and black (-) leads coming from plug 1 to an

appropriate power source.

• Install a 1 Amp fuse into the red (+)positive power lead of the joystick for a 12V system (1/2 Amp for 24V

system).

• Termination requires CAN splitter (P/N 24196000) and CAN termination plug (P/N 24197000) not included.

Non-termination requires CAN splitter (P/N 24196000) not included.

• Refer to the respective plug figures for information on the plugs’ pins.

Joystick Plug Information

1 2