Dimensions Guide

Minimum
Model
Overall Inside Bowl
Cutout in Cabinet
Number L W L W D Countertop Size
See
Template**
SCUH1212SH 14
1
⁄2 14
1
⁄2 12
1
⁄2 12
1
⁄2 6
1
⁄2 18
(368mm) (368mm) (318mm) (318mm) (165mm) (457mm)
SCUH1212SM 14
1
⁄2 14
1
⁄2 12
1
⁄2 12
1
⁄2 6
1
⁄2 18
(368mm) (368mm) (318mm) (318mm) (165mm) (457mm)
GENERAL
SCUH1212SH hammered mirror finish
SCUH1212SM mirror finish
DESIGN FEATURES
Bowl Depth: 6-1/2" (165mm).
Coved Corners: 3" (76mm) vertical and 2" (51mm) horizontal
radius.
OTHER
Drain Opening: 3-1/2".
Note: All Elkay undermount sinks are designed to affix easily to
the underside of any solid surface countertop.
SINK DIMENSIONS*
*Length is left to right. Width is front to back.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other p roducers’ offerings, be certain these features are not
overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 8/11) 1-175D
elkayusa.com
Gourmet Undermount Sinks
Model SCUH1212 Series
®
SPECIFICATIONS
Model SCUH1212
12-1/2"
(318mm)
14-1/2"
(368mm)
14-1/2"
(368mm)
12-1/2"
(318mm)
6-1/2"
(165mm)
Model SCUH1212
High quality single bowl sink is formed of type 304 (18-8) nickel
bearing stainless steel material.
OPTIONAL ACCESSORIES
Drain: LK99
Installation Profile
1/2"(13mm) Reveal
Countertop
Silicone Caulk
(Not Furnished)
1/2" (13mm)
Sink
1-1/8"
(29mm)
Mounting
Clip
Fastener
Underside: Fully undercoated to reduce condensation and dampen sound.
**Template 74180291 and countertop mounting clips are packed with every sink.
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.