Specification Sheet

GENERAL
Pedestal steel bottle filler with textured power coat finish and
E-Coat immersion for year-round beauty with minimum main-
tenance. The E-Coat immersion process coats the outside
and inside of the unit for the ultimate in corrosion protection.
NO LEAD DESIGN
CONSTRUCTION
Pushbutton Actuation Mechanism: Self-closing, vandal-
resistant pushbutton does not require grasping or twisting.
Inlet Strainer: Easily cleaned in-line strainer screen traps par-
ticles of 140 microns or larger before they enter the waterway.
Access Panel: Manufactured of heavy-gauge steel with
vandal-resistan
t screws. Provides access for easy hook-up of
all plumbing connections.
SUGGESTED SPECIFICATIONS
Shipping Weight: 280, 330, or 380 lbs.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Tri-Level Outdoor Tubular
Bottle Filling Station
Model LK4430BF
SPECIFICATIONS
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2013 Elkay
(5/13) 19-30A
elkayusa.com
Model LK4430BF2UM Shown
This model is ADA compliant when properly installed.
This fountain is certified by WQA to lead-free compliance
including NSF/ANSI 61 and 372. .
Elkay
Bottle Filler: Heavy-duty steel construction with rounded design.
Laminar flow minimizes splash and allows easy maintenance.
Quick fill rate at 1 gallon per minute.
This model complies with the lead-free definition in the Safe
Drinking Water Act of 1986 and Lead Contamination Act of 1988.
Designed to be easily accessible to both physically challenged
and able-bodied individuals. Ideally suited for installation in
public areas. Model meets state and federal requirements as
defined by the Americans with Disabilities Act.
Unit shall be of tubular steel construction. Bottle Filler unit
shall include laminar flow and front pushbutton activation.
Stainless steel contoured basin with vandal-resistant one-piece
bubbler, if applicable. Shall comply with ADA guidelines and
be certified to lead-free compliance including NSF/ANSI 61,
CA 1953 and the Safe Drinking Water Act.
Configuration options:
- Single bottle filler in upper location with drinking fountain basins
at middle & lower positions (Model LK4430BF1U)
- Single bottle filler in middle location with drinking fountain basins
at upper & lower positions (Model LK4430BF1M)
- Single bottle filler in lower location with drinking fountain basins
at upper & middle positions (Model LK4430BF1L)
- Bottle fillers in upper & lower locations with drinking fountain basin
at middle position (Model LK4430BF2UL)
- Bottle fillers in upper & middle locations with drinking fountain basin
at lower position (Model LK4430BF2UM)
- Bottle fillers in middle & lower locations with drinking fountain basin
at upper position (Model LK4430BF2ML)
- Triple bottle fillers (Model LK4430BF3)