User Manual

ManualsBrandsElkay ManualsDrinking FountainsOutdoor Wall Mount Drinking Fountain, Freeze Resistant, Evergreen

PAGE 1

4405FR_FTN_A LK4405FR_FTN_A

1000003939 (Rev. C - 08/17)

Owners Manual

Freeze Resistant Wall Mounted Tubular Fountain

4405FR Fountains are among the easiest to install Fountains on the market today. To assure you install these

models easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE

INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND

OTHER APPLICABLE CODES. After installation, leave these instructions with the Fountain for future reference.

This Freeze Resistant Fountain is shipped in two separate cartons. The second carton(s) contains the Freeze

Resistant Package(s) that is installed on an interior heated wall. The interior space must maintain a minimum

temperature of 50° F (10° C). Refer to the Freeze Resistant Package for the rough-in dimensions for installation.

Installer

Summary of content (6 pages)

PAGE 1
4405FR_FTN_A LK4405FR_FTN_A Owners Manual Freeze Resistant Wall Mounted Tubular Fountain 8 Installer 4405FR Fountains are among the easiest to install Fountains on the market today. To assure you install these models easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND OTHER APPLICABLE CODES. After installation, leave these instructions with the Fountain for future reference.
PAGE 2
4405FR_FTN_A LK4405FR_FTN_A INSTALLATION INSTRUCTIONS IMPORTANT ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON IMPORTANT! INSTALLER PLEASE NOTE. THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING.
PAGE 3
PAGE 3 7 1/4" 184 mm 12 1/8" 308 mm PUSH BUTTON CABLE 12" 305 mm MAX. WALL THICKNESS A 26 1/8" 664 mm 6" 152 mm B D FINISHED FLOOR 1 3/4" 44 mm 3 1/2" 89 mm 7" 178 mm 4405 FREEZE RESISTANT FOUNTAIN MOUNTING BOLT AND ACCESS HOLE LAYOUT LEGEND A = MOUNTING BOLT LOCATIONS (4)(1/2" DIA. NOT PROVIDED). B = 7/8" DIA. (22mm) HOLE FOR WATER SUPPLY TUBE. C = 7/8" DIA. (22mm) HOLE FOR OPERATING CABLE. D = 2" DIA. (51mm) HOLE FOR WASTE LINE. FIG.
PAGE 4
1000003939 (Rev. C - 09/17) PAGE 4 O 10" 254 mm FINISHED FLOOR 2 7/8" 73 mm 1/8" 3 mm 12" 305 mm MAX. WALL THICKNESS 8" 203 mm 19 1/8" 486 mm 3 5/8" 92 mm 2 5/8" 67 mm 4405 FREEZE RESISTANT FOUNTAIN ROUGH-IN DRAWINGS 28 7/8" 733 mm 14 7/16" 367 mm 13 7/16" 341 mm 17 15/16" 455 mm 1. Wall should already be framed for the fountain using dimensions shown in Fig. 1. Shown dimensions pertain to installation location. These dimensions are required for compliance with ANSI Standard A117.1.
PAGE 5
4405FR_FTN_A LK4405FR_FTN_A CABLE SHEATH ADJUSTMENT To Increase Free Play To Reduce Free Play FIG. 5 FIG. 6 See Fig.9 FIG. 7 See Fig.5 FIG. 8 FIG. 9 PAGE 5 1000003939 (Rev.
PAGE 6
4405FR_FTN_A LK4405FR_FTN_A 3 3/8" O.D. UNPLATED COPPER TUBE CONNECT COLD WATER SUPPLY BUILDING WATER INLET 1/4" O.D. TUBE WATER INLET TO COOLER 5 10 8 FIG.