Specification Sheet

GENERAL

Pedestal steel bottle filler with textured power coat finish and

E-Coat immersion for year-round beauty with minimum main-

tenance. The E-Coat immersion process coats the outside

and inside of the unit for the ultimate in corrosion protection.

NO LEAD DESIGN

CONSTRUCTION

Pushbutton Actuation Mechanism: Self-closing, vandal-

resistant pushbutton does not require grasping or twisting.

Inlet Strainer: Easily cleaned in-line strainer screen traps par-

ticles of 140 microns or larger before they enter the waterway.

Access Panel: Manufactured of heavy-gauge steel with

vandal-resistant screws. Provides access for easy hook-up of

all plumbing connections.

SUGGESTED SPECIFICATIONS

ipping Weight: 184 lbs.

In keeping with our policy of continuing product improvement, Elkay reserves the right to change

product specifications without notice.

This specification describes an Elkay product with design, quality and functional benefits to the

user. When making a comparison of other producers’ offerings, be certain these features are not

overlooked.

Outdoor Tubular

Bottle Filling Station

Model LK4400BF

S P E C I F I C AT I O N S

2222 Camden Court

Oak Brook, IL 60523

Printed in U.S.A.

(9/11) 19-25

elkayusa.com

Model LK4400BF

This fountain is certified by WQA to lead-free compliance

including NSF/ANSI 61-ANNEX G, AB 1953.

Elkay

Bottle Filler: Heavy-duty steel construction with rounded design.

Laminar flow minimizes splash and allows easy maintenance.

Quick fill rate at 1 gallon per minute.

This model complies with the lead-free definition in the Safe

Drinking Water Act of 1986 and Lead Contamination Act of 1988.

Unit shall be of tubular steel construction. Shall include single

bottle filler unit with laminar flow and front pushbutton activation.

Shall be certified to lead-free compliance including NSF/ANSI

61, CA 1953 and the Safe Drinking Water Act.

PAGE 1
Outdoor Tubular Bottle Filling Station Model LK4400BF SP E C I F I C AT I O N S GENERAL Pedestal steel bottle filler with textured power coat finish and E-Coat immersion for year-round beauty with minimum maintenance. The E-Coat immersion process coats the outside and inside of the unit for the ultimate in corrosion protection. NO LEAD DESIGN This fountain is certified by WQA to lead-free compliance including NSF/ANSI 61-ANNEX G, AB 1953.
PAGE 2
Outdoor Tubular Bottle Filling Station Model LK4400BF ® ROU GH - I N D I M E N SI ON S MOUNTING INSTRUCTIONS and PLUMBING CONNECTIONS Mount on a smooth, flat, finished surface with adequate support (300 lb. load maximum. Secure unit with six 3/8” minimum screws or anchor bolts (not provided). Refer to rough-in. TOP VIEW BACK VIEW Water supply 3/8” O.D. unplated copper tube. Waste 1-1/4” IPS. Trap and service stop not included.