Installation Sheet

ManualsBrandsElkay ManualsCommercial PlumbingEZH20 14" Floor Mounted Outdoor Bottle Filling Station

PAGE 1

98641C (Rev. C - 12/15)

4400BF_FTN LK4400BF_FTN

Owners Manual

Model 4400BF

Floor Mount Tubular Bottle Filler Fountain

INSTALLER

4420BF Fountains are among the easiest to install Fountains on the market today.

To assure you install these models easily and correctly, PLEASE READ THESE

SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR

INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND OTHER

APPLICABLE CODES. After installation, leave these instructions with the Fountain for

future reference.

Summary of content (4 pages)

PAGE 1
4400BF_FTN LK4400BF_FTN Owners Manual Model 4400BF Floor Mount Tubular Bottle Filler Fountain INSTALLER 4420BF Fountains are among the easiest to install Fountains on the market today. To assure you install these models easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND OTHER APPLICABLE CODES. After installation, leave these instructions with the Fountain for future reference.
PAGE 2
4400BF_FTN LK4400BF_FTN INSTALLATION INSTRUCTIONS IMPORTANT ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON IMPORTANT! INSTALLER PLEASE NOTE. THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER.
PAGE 3
PAGE 3 B 44" 1118mm 1/2" O 29 750mm 64" 1626mm LEGEND A = 3/8" O.D. UNPLATED COPPER TUBE CONNECT - SHUT OFF VALVE BY OTHERS B = ACCESS PANEL ( 8" X 10" ) 8" 203mm 30" 762mm B 14 9/16" 371mm 3" 76mm O 12" 305mm B.C. O 10" 254mm O 14" 356mm O 1/2" 13mm (6) 4400BF_FTN LK4400BF_FTN 98641C (Rev.
PAGE 4
400BF_FTN LK4400BF_FTN TROUBLE SHOOTING AND MAINTENANCE ACTUATION OF QUICK CONNECT WATER FITTINGS: Fountain is provided with lead-free connectors which utilize an o-ring water seal. To remove tubing from the fitting, relieve water pressure, push in on the gray collar while pulling on the tubing. (see Fig.2) To insert tubing, push tube straight into fitting until it reaches a positive stop, approximately 3/4". 1/4” O.D. TUBE WATER INLET TO COOLER 3/8” O.D.