Specification Sheet

PRODUCT SPECIFICATION
Architectural fountain with integral bottle lling station. EZWS-ERPBM8K
shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet
water. Unit shall be stainless steel construction with plastic ABS alcove.
Sensor-activation with an auto 20-second shut-off timer. Shall include
Green Ticker™ displaying count of plastic bottles saved from waste. Bottle
ller shall provide 1.1 gpm ow rate with laminar ow to minimize splashing.
Shall include integrated silver ion anti-microbial protection in key areas. Unit
shall meet ADA guidelines. Unit shall be lead-free design which is certied
to NSF/ANSI 61 and 372 and meets Federal and State low-lead
requirements. Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.
FOUNTAINS GENERAL
Fully exposed single fountain basin made of 300 series stainless steel,
polished to a lustrous satin nish with high shine outer edge.
Fountain has contoured basin that minimizes splashing. Flexi-Guard
®
Safety
bubbler is keyed in location to prevent rotation. Fully functional, vandal-
resistant front push button on the fountain. Flow regulator provides constant
stream from 20 to 105 psi water pressure.
BOTTLE FILLER STANDARD FEATURES
• No-touch, sensor- activated bottle ller
• Auto 20-second shut-off
• Integrated Silver Ion Anti-Microbial Protection in key areas
• Quick Fill Rate: 1.1 gpm
• Laminar Flow provides minimal splash
• Real Drain System eliminates standing water
• Visual User Interface display includes:
• Innovative Green Ticker™ counts bottles saved from waste
• Includes lower panel for easy access and servicing
COOLING SYSTEM
• Compressor: Hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.
• Condenser: Fan cooled. Fan motor is permanently lubricated.
• Cooling Unit: Combination tube-tank type. Continuous copper tubing
which is fully insulated with EPS foam that meets UL requirements for
self-extinguishing material.
• Refrigerant control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.
• Temperature Control: Enclosed adjustable thermostat is factory preset.
Requires no adjustment other than for altitude requirements, easily
accessible by removing lower grille panel.
CAPACITIES CHART
Model
Voltage /
Hertz
Chilling
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship Wt.
EZWS-ERPBM8K 115V / 60Hz 8.0 GPH 5.0 370 170 lbs.
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
© 2015 Elkay
SPEC00362 (05/2015)
CONSTRUCTION
EZWS-ERPBM8K single fountain furnished complete with Flexi-Guard
®
Safety bubbler. Fully assembled with front push button on the fountain,
ow regulator (20 to 105 psi), stainless steel back panel. No traps are
furnished.
• Stainless Steel bottle ller construction with ABS plastic alcove
• Includes stainless steel lower panel
• Furnished with wall mounting frame constructed of galvanized steel
Mounting can be ordered separately for pre-install
Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12 months
from date of installation or 18 months from factory shipment, whichever
date falls rst.
CERTIFICATIONS / STANDARDS
• ADA Compliant
• UL399 and CAN/CSA 22.2 No. 120 Certied
• NSF/ANSI 61 and 372 Certied
• GreenSpec
®
Listed
This specication describes an Elkay product with design, quality and functional
benets to the user. When making a comparison of other producer’s offerings, be
certain these features are not overlooked.
No Lead Single SwirlFlo
®
Wall Mount, Barrier-Free Refrigerated Fountain
with EZH2O
®
Bottle Filling Station
Model EZWS-ERPBM8K
Model
EZWS-ERPBM8K
Rated for Indoor Use Only
SPECIFICATIONS
In keeping with our policy of continuing product improvement,
Elkay reserves the right to change specication without notice.
Please visit elkay.com for the most current version.