Specification Sheet

ManualsBrandsElkay ManualsCommercial PlumbingEZH20 18-3/8" Wall Mounted Single Station Hands Free Bottle Filler Combo - Cooler Operated and Vandal Resistant Bubbler

2222 Camden Court

Oak Brook, IL 60523

630-572-3192

elkay.com

SPEC14-60 (01/2015)

PRODUCT SPECIFICATION

Unit shall include electric water cooler with bottle lling station. EZS8WS

shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet

water. EZSDWS shall deliver non-chilled drinking water. Units shall

have pushbar activation. Bottle lling unit shall include an electronic

sensor for touchless activation with auto 20-second shut-off timer. Shall

include Green Ticker™ displaying count of plastic bottles saved from waste.

Bottle ller shall provide 1.1-1.5 gpm ow rate with laminar ow to minimize

splashing. Shall include integrated silver ion anti-microbial protection in key

areas. Unit shall meet ADA guidelines. Unit shall be lead-free design which

is certied to NSF/ANSI 61 and 372 and meets Federal and State low-lead

requirements. Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.

STANDARD FEATURES

• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)

• Easy-touch front and side pushbar controls (Cooler)

• Integrated Silver Ion Anti-microbial Protection in key areas

• Quick Fill Rate: 1.1 gpm (EZS8WS); 1.5 gpm (EZSDWS)

• Laminar Flow provides minimal splash

• Real Drain System eliminates standing water

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste

• Available with Flexi-Guard

Safety or Vandal-Resistant

bubbler

(

includes “VR” code in model no.)

• Cooler panel nishes: Light Gray Granite Vinyl Clad Steel or Stainless Steel

COOLING SYSTEM (Models EZS8WS & EZS8WSVR only)

• Compressor: hermetically-sealed, reciprocating type, single phase.

Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is

permanently lubricated.

• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous

copper tubing with stainless steel tank. Fully insulated with EPS foam

which meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately

calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat

is factory preset. Requires no adjustment other than for altitude

requirements.

CAPACITIES CHART

Model

Voltage /

Hertz

Chilling**

Capacity

F.L.

Amps

Rated

Watts

Approx.

Ship Wt.

UL399

and CAN/

CSA 22.2

No. 120

Certied

ADA

COMPLIANT

ANSI/NSF

61 and 372

Certied

GreenSpec

Listed

EZS8WS(VR)*K 115V / 60Hz 8.0 GPH 5.0 370 68 lbs.

• • • •

EZS8WS(VR)*2K 220V / 50Hz 6.7 GPH 2.5 370 68 lbs.

++ • • •

EZS8WS(VR)*3K 220V / 60Hz 8.0 GPH 2.5 370 68 lbs.

++ • • •

EZSDWS(VR)*K 115V/60 Hz

–

1.0 15 42 lbs.

• • • •

EZSDWS(VR)*2K 220V/50Hz

–

0.5 15 42 lbs.

++ • • •

EZSDWS(VR)*3K 220V/60Hz

–

0.5 15 42 lbs.

++ • • •

*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler panels.

**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.

++Complies; not third party certied.

RATED FOR INDOOR USE ONLY

CONSTRUCTION

• Stainless Steel basin with integral drain

• Galvanized structural steel cooler chassis provides

structural integrity

• Stainless steel bottle ller wrapper with ABS plastic Alcove

• Cooler cabinet available as Light Gray Granite Vinyl Clad

Steel or Stainless Steel (additional cost) construction

• Flexi-Guard

Safety Bubbler (option) utilizes an infused

anti-microbial pliable polyester elastomer to prevent

accidental mouth injuries. Flexes on impact.

• Vandal-resistant bubbler (option) is one-piece heavy-duty

chrome-plated

Warranty: 5 year limited warranty on the unit’s refrigeration

system. Electrical components and water system are

warranted for 12 months from date of installation or 18

months from factory shipment, whichever date falls rst.

EZH2O

Bottle Filling Station

with Single EZ Cooler

Models EZS8WS & EZSDWS

Models EZS8WSSK

or EZSDWSSK

Models

EZS8WSVRLK or

EZSDWSVRLK

SPECIFICATIONS

In keeping with our policy of continuing product improvement,

Elkay reserves the right to change specication without notice.

Please visit elkay.com for the most current version.

This specication describes an Elkay product with design, quality and functional

benets to the user. When making a comparison of other producer’s offerings,

be certain these features are not overlooked.

Summary of content (2 pages)

PAGE 1
EZH2O® Bottle Filling Station with Single EZ Cooler Models EZS8WS & EZSDWS SPECIFICATIONS PRODUCT SPECIFICATION RATED FOR INDOOR USE ONLY Unit shall include electric water cooler with bottle filling station. EZS8WS shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water. EZSDWS shall deliver non-chilled drinking water. Units shall have pushbar activation. Bottle filling unit shall include an electronic sensor for touchless activation with auto 20-second shut-off timer.
PAGE 2
EZH2O® Bottle Filling Station with Single EZ Cooler Models EZS8WS & EZSDWS ROUGH-IN DIMENSIONS RATED FOR INDOOR USE ONLY IMPORTANT! INSTALLER PLEASE NOTE: These units are designed and built to provide water to the user which has not been altered by materials in the cooler waterway. The grounding of electrical equipment such as telephone, computers, etc. to water lines is a common procedure. This grounding may be in the building but may also occur away from the building.