Specification Sheet

SPECIFICATIONS
Elkay EZH2O Bottle Filling Station with Bi-Level ADA Cooler Dual
Hands Free Activation
Non-Filtered 8 GPH Light Gray
Model EZOOTL8WSLK
In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for
the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user.
When making a comparison of other producers’ offerings, be certain these features are not overlooked.
Elkay REV 07092020 1333 Butterfield Road, Suite 200 © 2020 Page 1
EZOOTL8WSLK Downers Grove, IL 60515 EZOOTL8WSLK_spec.pdf
PRODUCT SPECIFICATIONS
Elkay EZH2O® Bottle Filling Station with Bi-Level ADA Cooler Dual
Hands Free Activation, Non-Filtered 8 GPH Light Gray. Chilling
Capacity of 8.0 GPH (gallons per hour) of 50 F drinking water, based
on 80 F inlet water and 90 F ambient, per ASHRAE 18 testing.
Features shall include Antimicrobial, Green Ticker™, Hands Free,
Laminar Flow, Real Drain. Furnished with Flexi-Guard ® Safety
Bubbler. Electronic Bottle Filler Sensor activation. Product shall be Wall
Mount (On Wall), for Indoor applications, serving 2 station(s). Unit shall
be certified to UL 399 and CAN/CSA C22.2 No. 120. Unit shall be lead-
free design which is certified to NSF/ANSI 61 & 372 (lead free) and
meets Federal and State low-lead requirements.
Special Features:
Antimicrobial, Green Ticker™, Hands
Free, Laminar Flow, Real Drain
Finish:
Light Gray Granite
Power:
115V/60Hz
Bubbler Style:
Flexi-Guard ® Safety Bubbler
Activation by:
Electronic Bottle Filler Sensor
Mounting Type:
Wall Mount (On Wall)
Chilling Option*:
8.0 GPH
Full Load Amps
6
Rated Watts:
370
Dimensions (L x W x H):
36-3/4" x 19" x 39-1/16"
Approx. Shipping Weight:
101 lbs.
Installation Location:
Indoor
No. of Stations Served:
2
*Based on 80° F inlet water & 90° F ambient air temp for 50° F chilled
drinking water.
Green Ticker: Informs user of number of 20 oz. plastic water
bottles saved from waste.
Laminar flow provides clean fill with minimal splash.
Silver Ion Antimicrobial protection on key plastic
components to inhibit the growth of mold and mildew.
Real Drain System eliminates standing water.
COOLING SYSTEM
Compressor: Hermetically-sealed, reciprocating type,
single phase. Sealed-in lifetime lubrication.
Condenser: Fan cooled, copper tube with aluminum
fins. Fan motor is permanently lubricated.
Cooling Unit: Combination tube-tank type. Continuous
copper tubing with is fully insulated with EPS foam that
meets UL requirements for self-extinguishing material.
Refrigerant Control: Refrigerant R-134a is controlled by
accurately calibrated capillary tube.
Temperature Control: Easily accessible enclosed
adjustable thermostat is factory preset. Requires no
Included with Product:
Water Cooler (EZOOTL8WSLC),
Bottle Filler (EZWSR)
Ships in multiple boxes.
PRODUCT COMPLIANCE
ADA & ICC A117.1
ASME A112.19.3/CSA B45.4
Buy American Act
CAN/CSA C22.2 No. 120
GreenSpec
®
NSF/ANSI 61 & 372 (lead free)
UL 399
Complies with ADA & ICC A117.1 accessibility requirements when installed
according to the requirements outlined in these standards. Installation may
require additional components and/or construction features to be fully
compliant. Consult the local Authority Having Jurisdiction if necessary.
Installation Instructions (PDF)
5 Year Limited Warranty on the refrigeration system of the unit.
Electrical components and water system are warranted for 12 months
from date of installation. Warranty pertains to drinking water
applications only. Non-drinking water applications are not
covered under warranty.
Warranty (PDF)
OPTIONAL ACCESSORIES
EWF3000 - Elkay WaterSentry Plus Filter System Kit (Bottle Fillers)
LKAPREZL - Elkay Cane Apron for EZ Gray
MLP200 - Accessory - In Wall Carrier (Bi-Level) for bi-level EZ, LZ,
EMABF, LMABF, VRC, LVRC models
PART:________________________________QTY: _____________
PROJECT:______________________________________________
CONTACT:______________________________________________
DATE:__________________________________________________
NOTES:_________________________________________________
APPROVAL:_____________________________________________

Summary of content (3 pages)