Specification Sheet

In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specications without notice.
Model ERPBM282RAK
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
COOLING SYSTEM
Motor Compressor: Hermetically sealed, reciprocating type,
220V, 50 Hz single phase. Sealed-in lifetime oil supply.
Condenser: Fan cooled, copper tube with aluminum fins. Fan
motor is permanently lubricated.
Cooling Unit: Combination tube-tank type. Self cleansing. Tube
portion is continuous coil of copper tubing. Tank is stainless
steel. Fully insulated with EPS foam which meets Underwriters
Laboratories Inc. requirements for self extinguishing material.
Temperature Control: Enclosed adjustable thermostat is
factory preset. Requires no adjustment other than for altitude
requirements.
Chilling
Capacity **
Full
Glass
Ship.
Model
Rated Load
Filler Pre-
Wt.
Number
Watts Amps
Option Cooler Lbs.
ERPBM282RAK
370 2.0
No
No 141
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2015 Elkay
(Rev. 9/15) 12-42C
elkay.com
No Lead Two-Level SwirlFlo
®
Wall Mount Water Cooler
Barrier-Free Access
Model ERPBM282RAK (Reversed)
®
SPECIFICATIONS
Refrigerant Control: Refrigerant HFC-134a is controlled by
accurately calibrated capillary tube for positively trouble-free
performance.
CONSTRUCTION
Fountain Body: #18 gauge, 300 series nickel bearing stainless
steel polished to a lustrous satin finish with high shined outer
edge. Contoured basin offers large strike area to minimize
splashing. #16 gauge, 300 series tubular support arms incor-
porate unique recess to accept basins. Fully functional
vandal-resistant push buttons are easy to operate.
Exclusive Flexi-Guard
®
Safety Bubbler: Innovative design
utilizes a pliable polyester elastomer to prevent accidental
mouth injuries. Flexes on impact, then returns to original
position. Strong. Abrasion-resistant. Anti-sweat. Bubbler
meets UL requirements and all sanitary codes and is keyed in
location to prevent rotation.
Front Panel Grill: Made of 300 series stainless steel, polished to a
uniform Elkay satin finish. Removable louvered ventilating grill
encloses refrigeration unit and plumbing.
Wall Mounting Frame: MF200 frame furnished with each unit.
Frame allows flush mounting to finished wall.
5 YEAR LIMITED WARRANTY 5 year limited warranty on the unit's
refrigeration system. Electrical components and water system
are warranted for 12 months from date of installation or
18 months from factory shipment, whichever date falls
first.
Elkay Pressure-Type Water Coolers are designed to operate on
20 psi to 105 psi supply line pressure. If inlet pressure is above
105 psi, a pressure regulator must be installed in the supply
line. Any damage caused by reason of connecting this product to
supply line pressures lower than 20 psi or higher than 105 psi is
not covered by the warranty.
STANDARDS
This cooler is certified by WQA to lead-free compliance including
NSF/ANSI 61 and 372.
This specication describes an Elkay product with design, quality and functional benets to the
user. When making a comparison of other producers’ oerings, be certain these features are not
overlooked.
Elkay Electric Air Cooled Water Coolers are listed
by Underwriters Laboratories Inc. and comply with
both Canadian and U.S. requirements.
These units comply with A.R.I. Standard 1010.
GENERAL
Fully exposed dual height stainless steel fountains have
recessed in-the-wall refrigeration system and stainless steel
grill. Stainless steel tubular support arms incorporate unique
recess to be integrated with basins. All stainless steel
polished to lustrous satin finish with high shined outer edge.
Fountains have contoured basins to minimize splashing.
Flexi-Guard® Safety bubblers and easy to operate, fully func-
tional vandal-resistant front push button valve and in-line
flow regulators provide constant stream from 20 to 105
psi.
NOTE: Minimum 40 psi supply line pressure required in spe-
cial circumstances where both sides of bi-level are in use
simultaneously to ensure adequate stream height. Use of
water filter in this situation is not recommended.
Energy efficient refrigeration system utilizes a combination
tank continuous-tube type evaporator, refrigerant drier, and
capillary tube.
THIS WATER COOLER COMPLIES WITH THE REQUIREMENTS
OF A.D.A. (AMERICANS WITH DISABILITIES ACT) WHEN
PROPERLY INSTALLED. UNIT IS COMPLIANT IF INSTALLED IN
AN ALCOVE AND IS ALSO COMPLIANT WHEN MOUNTED
ON AN EXPOSED WALL IF A WING WALL IS LOCATED ON
THE RIGHT SIDE OR IF AN LKAPR1 APRON IS INSTALLED
UNDER THE UPPER UNIT.
NO LEAD DESIGN
THIS WATER COOLER COMPLIES WITH THE LEAD-
FREE DEFINITION IN THE SAFE DRINKING WATER ACT OF
1986 AND LEAD CONTAMINATION CONTROL ACT OF 1988.
Elkay Water Coolers are manufactured with a waterway sys-
tem utilizing copper components and completely lead-free
material. These waterways have no lead because all lead
materials, such as leaded brass, have been removed. All
joints are brazed using silver solder only. No lead solder is
permitted. A strainer with an easily cleanable screen is pro-
vided to allow trapping and convenient removal of waterborne
particulate of 140 microns and larger prior to their entry into
the water cooler.
CAPACITIES CHART
Volts / Hz
220V / 50Hz 6.7 GPH