Specification Sheet

© 2015 Elkay
SPEC12-51 (09/2015)
RATED FOR INDOOR USE ONLY
SPECIFICATIONS
Non-Filtered Wall Mount Water Cooler
Models EMABF8* and EMABFD*
*Please see table below for entire sku
PRODUCT SPECIFICATION
Self-contained, wall mount single electric water cooler. Refrigerated EMABF8
model offers a chilling capacity of 8 gallons per hour of 50°F drinking water,
based upon 80°F inlet water and 90°F ambient. Model EMABFD is non-
refrigerated and shall deliver non-chilled drinking water. Light touch front and
side pushbar actuation with raised letters for the visually impaired. Type 300
series stainless steel top, with satin nish resists stains. Anti-splash ridge
reduces splatter. Contoured to insure proper drainage. Unit shall meet ADA
guidelines. Unit shall be lead-free design which is certied to NSF/ANSI 61
and 372 and meets Federal and State low-lead requirements. Unit shall be
certied to UL399 and CAN/CSA 22.2 No. 120.
STANDARD FEATURES
• Easy-Touch pushbar activation
• Contoured basin minimizes splashing; with integral drain
Available with Flexi-Guard
®
Safety bubbler or Vandal-resistant
t
bubbler
(
t
includes “VR” code in model no. see chart below)
• Valve with built-in ow regulator to provide constant stream from 20 to
105 psi water pressure
• Finish options: Impact-resistant vinyl coating or stainless steel
• Rated for Indoor use
COOLING SYSTEM (Model EMABF8 only)
Compressor: Hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.
Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is
permanently lubricated.
Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous
copper tubing with stainless steel tank. Fully insulated with EPS foam
that meets UL requirements for self-extinguishing material
Refrigerant Control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.
Temperature Control: Easily accessible enclosed adjustable thermostat
is factory preset. Requires no adjustment other than for altitude
requirements.
CAPACITIES CHART
Model
Voltage /
Hertz
Chilling**
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship
Wt.
UL399 and
CAN/CSA 22.2
No. 120
Certied
ADA
COMPLIANT
NSF/ANSI
61 and 372
Certied
EMABF(VR)8* 115V / 60Hz 8 GPH 4.0 370 60 lbs.
EMABF(VR)D*
1.0 15 30 lbs.
`
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
In keeping with our policy of continuing product improvement,
Elkay reserves the right to change specication without notice.
Please visit elkay.com for the most current version.
This specication describes an Elkay product with design, quality and functional
benets to the user. When making a comparison of other producer’s offerings,
be certain these features are not overlooked.
CONSTRUCTION
Stainless Steel basin with integral drain
Galvanized structural steel cooler chassis provides structural
integrity
Cooler cabinet available as Light Gray Granite Vinyl Clad Steel or
Stainless Steel (additional cost) construction
Exclusive Flexi-Guard
®
Safety Bubbler (option) utilizes an infused
anti-microbial pliable polyester elastomer to prevent accidental
mouth injuries. Flexes on impact.
Vandal-resistant
t
bubbler (option) is one-piece, heavy-duty
construction
Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12
months from date of installation or 18 months from factory shipment,
whichever date falls rst.
Please use this table for the complete sku to order. *Please add the color code of (L) Light Gray Granite or (S) Stainless Steel for the cooler wrapper for
your complete sku.
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.

Summary of content (2 pages)