Specification Sheet

Lavatory Sink, Wall Mounted
Models ELV2219,ELV2219CS,
ELVWO2219 and ELVWO2219CS
®
SPECIFICATIONS
GENERAL
Hi ghest quality sink formed of #18 (1.2mm) gauge, type 304 (18-8)
nickel bearing stainless steel.
ELV2219
ELV2219CS
ELVWO2219 (With connected overflow)
ELVWO2219CS (With connected overflow)
Model ELV22193
OPTIONAL ACCESSORIES
Faucet: LKB721C
Drains: LK174, LK174LO
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Design Features
Bowl Depth: 5-1/2 (140mm)
Rim: 5/32" (4mm) raised rims and 2-1/2" (64mm) high backsplash.
Coved Corners: 1-3/4" (44mm) radius vertical and horizontal.
Apron Front: 2-1/2" (64mm) at front and both sides.
Finish: Exposed surfaces are hand blended to a uniform satin
lustrous finish.
Underside: Sound dampening pad to dampen sound and reduce
condensation.
Other
Drain Opening: 1-5/8" (41mm) rear centered outlet.
Furnished with integral support brackets and separate wall hanger.
FOLLOWING MODELS DO NOT INCLUDE
FAUCET AND FITTING:
(CHECK MODEL SPECIFIED)
See other side for faucet hole locations
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2015 Elkay
(Rev. 04/15)
03-03
elkay.com
These sinks are compliant to ADA and ANSI/ICC A117.1
accessibility requirements when installed according to the
requirements outlined in these standards.